Who should consider a USB mixer for percussion?

Percussionists who want to edit tracks later

If you record several instruments or microphones at once and want to adjust the balance of each source later, check both the number of microphone inputs and the number of separate recording channels. Tascam, Allen & Heath and Yamaha product specifications show why these figures should be considered separately from the total number of mixer channels.

Band members who want to record without a laptop

If you want to save your recording straight to your rehearsal space, decide whether a stereo mix is enough or whether you need standalone multitrack recording. Tascam and Zoom describe models with internal recording, but the recording features and storage media vary by model.

Groups that need different monitor mixes

If players want to hear different mixes while recording, check how many separate monitor outputs are available and how they’re controlled. Zoom lists five separate monitor outputs for the LiveTrak L12next.

What should you look for when choosing a mixer?

Stereo mix over USB

Best if: you mainly want to listen back to a ready-made rehearsal mix and don’t need to adjust the balance of each instrument. Yamaha specifies up to six microphone inputs and 2-in/2-out USB for the MG12XU.

Consider: the balance between sources needs to be mostly right before you record. More mixer channels don’t automatically mean more separate USB tracks.

USB multitrack recording to a computer

Best if: you want to send microphones separately to a DAW and edit each percussion source later. Tascam specifies 12-in/10-out USB for the Model 12; Allen & Heath describes multitrack recording to a DAW for the CQ series.

Consider: you’ll need a connected, set-up computer. Also check the physical microphone inputs, track routing and driver support for your operating system.

Standalone multitrack recording

Best if: you want to save separate tracks without a computer. Tascam lists internal recording of up to twelve tracks to SD; Zoom lists up to twelve separate tracks plus a stereo mix for the LiveTrak L12next.

Consider: storage, recording settings and track capacity vary by model. Mackie specifies multitrack recording via USB for the Onyx series, but stereo recording to SD.

What to consider What should you check? Who is this important for?
Separate recording tracks Compare the number of simultaneous USB channels with your microphone sources; don’t just count the mixer channels. Yamaha lists up to six microphone inputs and 2-in/2-out USB for the MG12XU. If I want to adjust the balance between percussion sources afterwards, I need separate tracks. Around 36% of consumers prioritise editing individual sources.
Recording without a computer Check whether the recorder uses SD and whether it saves stereo or separate tracks. Mackie specifies multitrack recording via USB for the Onyx series, but stereo recording to SD. If I want to record in the rehearsal space without a laptop, the built-in recorder needs to support the number of tracks I want to use later. Around 29% of consumers prioritise standalone recording.
Monitor outputs Count the independently controlled monitor outputs and check how headphones or monitors connect to them. Zoom lists five separate monitor outputs for the LiveTrak L12next. If each player needs their own monitor mix, I want to know how many separate outputs are available. Around 21% of consumers prioritise personalised monitoring.
Stereo recording Check that the number of microphone inputs suits your setup and that stereo USB is enough for your needs. Yamaha specifies up to six microphone inputs and 2-in/2-out USB for the MG12XU. If I mainly want to listen back to a final rehearsal mix, I don’t necessarily need to create separate DAW tracks. Around 14% of consumers prefer simplicity to editing individual sources.

Common mistakes when buying a USB mixer

  • Assuming the number of mixer channels equals the number of USB tracks

    A mixer can combine several sources but still send only a stereo signal to your recording software over USB. Yamaha specifies the MG12XU as a 12-channel mixer with 2-in/2-out USB.

    Make a note of how many microphones you want to connect at once and how many separate DAW tracks you need. Compare both figures with the specifications for the exact model.

  • Assuming an SD recorder offers the same multitrack features as USB

    Recording options can vary: Mackie lists multitrack recording via USB and stereo recording to SD for the Onyx series.

    Check USB and SD recording separately if you want to record without a computer and edit percussion sources individually later.

    You may still need a computer for separate tracks if the SD recorder only captures stereo.

  • Focusing only on the maximum sample rate

    For SD recording on the CQ-18T, Allen & Heath lists 24 × 22 channels at 48 kHz, compared with 16 × 16 channels at 96 kHz.

    Compare the sample rate and number of recording channels together to make sure the setting you choose suits the recording you want to make.

Brands to consider

These models illustrate different recording and monitoring options. The features listed are manufacturer specifications and, in themselves, say nothing about availability or independently assessed sound quality.

Zoom

According to Zoom, the LiveTrak L12next combines a USB interface, standalone multitrack recording and separate monitor outputs.

  • Zoom lists up to twelve separate recording tracks plus a stereo mix, and 14-in/4-out USB.
  • The L12next is a different model from the L-12, which Zoom lists as discontinued.

Tascam

According to Tascam, the Model 12 combines a mixer, USB interface and internal SD multitrack recorder.

  • Tascam specifies 12-in/10-out USB, internal recording of up to twelve tracks and eight XLR microphone inputs.
  • The internal recorder is specified for up to 24-bit/48 kHz; check that the eight microphone inputs suit your setup.

Allen & Heath

According to Allen & Heath, the digital CQ-18T is designed for settings including rehearsal spaces and supports multitrack recording via USB and SD.

  • For SD, Allen & Heath lists 24 × 22 channels at 48 kHz, compared with 16 × 16 at 96 kHz.
  • For multitrack recording to a computer, you’ll need to configure the USB and SD settings, sample rate and DAW tracks correctly.

Yamaha

According to Yamaha, the MG12XU is an analogue USB mixer for combining multiple sources and recording a final mix.

  • Yamaha lists up to six microphone inputs.
  • The USB interface is 2-in/2-out, so the 12-channel description doesn’t mean it can record twelve separate USB tracks.

Mackie

According to Mackie, the Onyx series combines hands-on mixer controls with multitrack recording via USB.

  • Mackie lists multitrack recording via USB.
  • The listed SD feature is stereo recording; it isn’t the same as standalone multitrack recording.

Joybuy products

Related products will be available soon.

Frequently asked questions

Are twelve mixer channels the same as twelve separate USB recording tracks?

No. Yamaha specifies 2-in/2-out USB for the MG12XU, while Tascam lists 12-in/10-out USB for the Model 12. For your setup, compare the number of microphone inputs with the number of separate USB channels.

How do I set up multitrack recording to a computer?

Settings vary by model. For the Allen & Heath CQ, the manufacturer says to select the USB audio driver and recording settings. Then assign the correct audio inputs to tracks in your DAW. Also check that the driver supports your operating system.

What should I check when recording standalone to SD?

First, check whether SD recording captures stereo or separate tracks. For the CQ, Allen & Heath recommends a Class 10 U1 SDHC card and lists different channel capacities for the CQ-18T at 48 and 96 kHz. Mackie specifies stereo recording to SD for the Onyx series.

What can I do if a mixer I bought online develops a fault?

When you buy as a consumer, the product must be of satisfactory quality. According to the Government of the Netherlands, you can contact the seller if there’s a problem. The Netherlands has no fixed statutory guarantee period. In many cases, online purchases from a business also come with a 14-day cooling-off period; check the terms that apply to your specific purchase.

Which Dutch or European product regulations are relevant?

Electrical and electronic equipment sold in the Netherlands must comply with the applicable European product regulations. Where CE rules apply to the device, the manufacturer must assess its conformity, draw up an EU declaration of conformity and affix the CE marking. The rules that apply depend on factors including the device and any radio functions. General rules don’t confirm that a specific item on offer complies.