Who is this for?

Solo voice-over artist

You record short spoken introductions on a computer and mainly need a suitable microphone input, hands-on controls and the ability to monitor your audio. Yamaha describes these features for the AG03MK2; Behringer describes microphone and line sources for the XENYX 802S.

Creator who edits afterwards

You want to choose between recording a complete mix with computer audio and sending a clean microphone signal to your computer. With the Mackie ProFX6v3+, the selected USB mode determines what is sent to the computer.

Creator recording with guests

You sometimes record several voices at once, so you’ll want to check the number of microphone inputs and headphone outputs, as well as how separate tracks are saved. Tascam specifies these capabilities for the Mixcast 4.

What should you look for when buying?

Compact USB mixer for one speaker

A good fit if: you use one microphone and record on a computer. Yamaha lists a microphone channel with +48 V, a physical fader and two-track USB recording and playback for the AG03MK2.

Bear in mind: two-track USB recording doesn’t necessarily mean you can edit every physical input separately.

Mixer with configurable USB routing

A good fit if: sometimes you want to record computer audio, and at other times send input channels to the computer without effects. Mackie describes Standard, Loopback and Interface modes for the ProFX6v3+.

Bear in mind: the selected mode determines which signals and effects end up in your recording, so make a test recording.

Console for multiple speakers or recording without a computer

A good fit if: you need multiple microphones or headphones, or want to save separate recordings without a computer. Tascam specifies four microphone inputs, four headphone outputs and SD card recording for the Mixcast 4.

Bear in mind: if you only make short solo recordings, you may not use the extra controls and connections.

What to consider What should you check? Who is this important for?
Simple solo recording Check the microphone type, whether phantom power is needed, the headphone connection and the USB signal the computer receives. If I’m recording a short introduction on my own, I want to connect my microphone easily, adjust my level and hear myself back. Around 36% of consumers prioritise making it easy to record a single voice.
Separate editing afterwards Check which channels and effects are sent to the recording software in each USB mode; use a test file to check the channels received. If I want to adjust my voice separately afterwards, I need to know whether it’s recorded as a separate signal. Around 29% of consumers prioritise separate editing.
Recording computer audio too Check whether Loopback is on, what computer audio is added and whether you can record without that audio being fed back in. When I want to record a jingle or other computer audio, I want to choose exactly what goes into the file. Around 21% of consumers make recording computer audio their main priority.
Multiple voices or recording independently Count microphones and headphones separately, then check how the tracks you need are saved to an SD card or via USB. If several people are recording at once or I want to record without a computer, I need the connections and storage to suit the way I work. Around 14% of consumers prioritise recording multiple voices or independently.

Common pitfalls

  • Confusing the number of inputs with the number of recording tracks

    Physical connections and USB routing are two different things. A mixer can combine several sources without sending each input to your computer as a separate track.

    Check the channel layout in the manual or recording software, and record a test file before you make your final introduction.

    If sources are only recorded as a mix, you may need to record again or do extra editing.

  • Leaving Loopback on without checking the file

    Loopback can add computer audio to your recording. That’s useful if you want to record that audio, but it can also capture sounds you don’t want in your introduction.

    Choose deliberately whether to record with or without computer audio, then listen back to the test file.

  • Expecting an advanced mixer to fix a reverberant room

    According to RØDE, a microphone placed too far away can pick up more reverberation and background noise. Extra mixer features can’t replace good microphone placement.

    Try different microphone positions and listen in your own room before choosing extra mixer features to deal with room noise.

    Changing the microphone position or recording location may take extra preparation time.

  • Assuming a sound button gives you permission to publish music

    Being able to play or record a jingle doesn’t automatically mean you can publish that music in a podcast.

    Check the rights for the specific music and how you plan to publish your introduction. BumaStemra notes that rights holders other than music authors may also be involved.

    Depending on how you use the music, you may need to pay for a licence or other rights.

Brands to consider

Yamaha

The AG03MK2 is a compact USB mixer for controlling one microphone and other sources while recording on a computer.

  • For CH1, Yamaha lists a microphone fader and +48 V phantom power, and describes Loopback.
  • The specified two-track USB recording doesn’t mean that every physical input is recorded separately.

Mackie

The ProFX6v3+ is an analogue USB-C mixer with several USB recording modes.

  • Mackie specifies two microphone preamps and Standard, Loopback and Interface modes.
  • The mode determines which effects and computer audio are recorded; manufacturers’ claims about sound quality aren’t independent listening tests.

Behringer

According to Behringer, the XENYX 802S is an analogue USB mixer for combining microphone and line sources.

  • Behringer lists two mono channels, stereo channels, an equaliser and phantom power.
  • The number of analogue inputs alone doesn’t tell you whether each source can be recorded as a separate USB track; check the routing you need.

Tascam

The Mixcast 4 is designed for spoken-word productions with several participants and standalone recording.

  • Tascam specifies four microphone inputs, four headphone outputs and SD card recording.
  • The extra controls are most useful if you actually need multiple speakers or a standalone setup.

RØDE

The RØDECaster Duo is a compact production console with several recording and playback options.

  • RØDE specifies two combo inputs and stereo or multitrack recording to microSD, USB storage or a computer.
  • A more extensive feature set doesn’t prove that a solo introduction will sound better in every home studio.

USB recording mixers at Joybuy

Related products will be available soon.

Frequently asked questions

Can I edit my voice and music separately afterwards with any USB mixer?

No, it depends on what the mixer sends in the mode you’ve selected. For the ProFX6v3+, Mackie distinguishes between a complete mix, a mix with computer audio and a mode that sends channels 1 and 2 without effects; Tascam also specifies multitrack recording for the Mixcast 4. Check the channels you need using a test file.

What should I do before my first recording?

Connect a compatible microphone and headphones, choose the USB recording mode and make a test recording. Check your voice and any computer audio in the recording. According to RØDE, a microphone placed too far away can pick up more room noise and reverberation.

What happens with the warranty in the Netherlands if the mixer develops a fault?

For a consumer purchase, the product must meet the expectations you’re entitled to have of it, according to the Dutch government. The Netherlands has no fixed statutory warranty period, and the retailer is your point of contact if there’s a problem. A manufacturer’s warranty or an extended warranty is separate from this.

Can I use recognisable voices of other people in my public introduction?

It depends on the recording and how you publish it. The Dutch Data Protection Authority states that processing personal data requires a lawful basis under the GDPR, and that in most cases you need permission to publish other people’s personal data publicly. The exception for purely personal or household use has limited conditions; a publicly accessible introduction isn’t automatically covered by it.

Do I automatically get all music rights when I buy a mixer?

No, buying a mixer doesn’t give you permission to publish music in a podcast. BumaStemra describes licences for using music in podcasts and notes that, as well as copyright, rights belonging to performers or record companies, for example, may also apply. The permissions you need depend, among other things, on the music and how you publish it.