Start by deciding what you want to record at the same time and edit separately later. A two-track USB mixer may be enough for a simple vocal-and-guitar demo, while separate tracks give you more flexibility to adjust the balance afterwards. In an untreated room, extra effects or recording tracks won’t automatically remove unwanted reflections, so pay attention to mic placement and headphone monitoring too. Also check the number of mic inputs, the USB routing and, if you want to record without a laptop, whether the mixer can record directly to a storage device.
Who is this guide for?
Singer-guitarist recording in a reverberant room
You want to make a clear demo and first find out how much of the room sound the microphone picks up. When recording acoustic guitar, Sound On Sound stresses the importance of limiting unwanted natural reverberation. So check your mic placement and monitor through headphones before choosing extra effects.
Musician who wants to mix vocals and instruments separately
You record sources at the same time but want to be able to change their balance later. Check the number of separate USB recording tracks and the routing, not just the number of mixer channels. Allen & Heath and PreSonus describe models with separate recording channels.
Mobile demo-maker without a permanent laptop setup
You want to be able to record without a computer too. Zoom describes the LiveTrak L-6 as a recorder that can capture tracks to microSD. Also check that it has enough mic inputs for your recording setup.
What should you look for?
First decide whether you want to save a stereo mix or adjust the sources separately later. Then check how many mic inputs you need and whether standalone recording is essential for the way you work.
| What to consider |
What should you check? |
Who is this important for? |
| Room sound |
Make short test recordings with the mic in different positions, then listen back through headphones. Check whether the mixer has headphone monitoring and suitable channel controls. |
If you’re recording vocals and guitar in an untreated room, you’ll want to hear what the space does to the sound first. Around 36% of consumers give the effect of the room the highest priority. |
| Separate tracks |
Check how many USB channels can be recorded at the same time and which signals are routed to them. The number of physical mixer channels alone won’t tell you. |
If you want to adjust the vocals and instrument separately after recording, the USB tracks and their routing are crucial. Around 29% of consumers prioritise separate post-production. |
| Recording vocals and guitar at the same time |
Count the microphones you’ll actually use at the same time. Check for phantom power if your microphone needs it, and a Hi-Z input if you want to connect a suitable guitar pickup directly. |
For a simple vocal-and-instrument setup, you’ll want enough suitable inputs without unnecessarily complicated routing. Around 21% of consumers give simultaneous recording the highest priority. |
| Recording without a computer |
Check whether the mixer can record directly to a storage device, which tracks it saves and how many microphones you can connect at the same time. |
If you want to record without a permanent laptop setup, you’ll need a recorder function and a storage workflow that suit your session. Around 14% of consumers prioritise standalone recording. |
Common pitfalls
-
Confusing mixer channels with separate USB tracks
A mixer can have several physical connections without recording each channel as a separate track on your computer. The Yamaha AG06MK2 has a 2-in/2-out USB interface. According to Mackie, the Mackie ProFX10v3+ offers different recording modes, but doesn’t record all ten mix channels separately via USB.
Check the specifications and manual to see how many USB inputs are available and which signals are routed to them.
-
Expecting effects or bit depth to fix room reflections
Effects and recorder functions won’t automatically change the room’s acoustics. Zoom’s 32-bit float claim refers to the recorder, not the sound of the room.
Make test recordings first and assess the mic placement through headphones. Then compare the recording and effects features.
-
Assuming similarly named models are the same mixer
The Allen & Heath ZED-10FX and ZEDi-10FX have different USB specifications. The older PreSonus StudioLive AR8 USB is also a different model from the StudioLive AR8c.
Compare the full model name and official specifications before treating different versions or product listings as equivalent.
Brands to consider
Allen & Heath
According to Allen & Heath’s technical documentation, the ZEDi-10FX combines analogue controls with a 4-in/4-out USB interface.
- The documentation lists four XLR mic inputs, phantom power and channel filters.
- Don’t confuse the ZEDi-10FX with the ZED-10FX. Allen & Heath lists a 2-in/2-out interface for the older mixer with the different name.
Zoom
The LiveTrak L-6 combines a compact mixer with multitrack recording to microSD or via USB.
- According to Zoom, the L-6 records ten separate tracks to a card, plus a stereo mix, and has a 12-in/4-out USB interface.
- The two XLR/TRS inputs are the mic inputs, so check whether that’s enough for your session.
Yamaha
The AG06MK2 offers a compact two-track USB setup for a simple vocal-and-instrument arrangement.
- Yamaha lists two phantom-powered mic inputs, a Hi-Z option on channel 2 and a 2-in/2-out USB interface.
- Two USB inputs don’t mean that every physical connection is recorded as a separate track on your computer.
PreSonus
The StudioLive AR8c is an analogue mixer with 8x4 USB and a standalone stereo recorder.
- According to PreSonus, the AR8c can capture every channel and the main mix via USB; the SD recorder captures the stereo mix.
- Don’t confuse the AR8c with the differently named StudioLive AR8 USB, which PreSonus marks as discontinued.
Mackie
The ProFX10v3+ is designed for anyone who wants to record a stereo mix with effects or dry signals from channels 1 and 2.
- Mackie specifies a 2x4 USB-C interface and several recording modes.
- The number ten in the model name doesn’t mean there are ten separate USB recording tracks.
Joybuy products
Related products coming soon.
Frequently asked questions
Do I always need separate USB tracks for vocals and acoustic guitar?
No, not if you’re happy to capture the balance as a stereo mix during recording. If you want to adjust the sources separately later, check the USB recording channels and routing on the specific model. The number of physical mixer channels isn’t enough to tell you.
How should I use a high-pass filter in this situation?
First, check whether you can hear low-frequency rumble or handling noise. Allen & Heath describes the filter on the ZEDi-10FX as a way to reduce this kind of low-frequency noise. Listen again after switching it on, as the filter won’t fix room reflections.
What if a mixer bought in the Netherlands breaks too soon during normal use?
In addition to any commercial warranty, statutory consumer rights apply in the Netherlands. According to ACM ConsuWijzer, if a product breaks during normal use sooner than you could reasonably expect, the seller must help by repairing or replacing it free of charge, or otherwise resolving the issue. There isn’t one fixed statutory warranty period for every mixer.
Is a CE mark on an electric mixer enough to prove it’s safe?
No. The European Commission explains that the CE mark indicates that the manufacturer considers the product to comply with the relevant EU product rules; it isn’t a certificate issued by a central EU authority. Check the product information and power supply for the specific version, especially if it’s made for another region.