Who is this choice relevant to?

Voice-over artist recording long solo takes

You want to be able to hear and see that the recording is progressing properly while narrating a film synopsis, so you don’t discover a problem only after the entire take.

Voice-over artist without a quiet room

You can speak close to the mic, but can hear background noise and are looking for a focused setup rather than a blanket promise of noise cancellation.

Voice-over artist with a simple desk setup

You want to get started without a separate audio interface, so your main concern is whether the connection, controls and included accessories suit your computer and workspace.

What should you look for in a microphone for long takes?

Start with the room and your speaking distance, then check monitoring and connectivity before weighing up the accessories.

What to consider What should you check? Who is this important for?
Monitoring a long take Check for a headphone output, a control for the monitor mix and a useful level meter. Make a test recording at your usual speaking volume. During a long solo narration, I want to hear straight away through headphones that the recording is coming through properly; around 36% of consumers put recording monitoring first.
Reducing room noise Compare the recording pattern and recommended speaking distance. Test the microphone in the room where you’ll actually be recording. If my room isn’t quiet, I want to speak close to the mic and capture my voice clearly without relying on a promise that all background noise will disappear; around 28% of consumers put room noise first.
Connection and workflow Check your computer’s port, the cable and the selected input in your recording software. An XLR connection requires a compatible mixer or audio interface. Before recording, I want to know that my microphone, computer and software will work together, so I don’t have to search for the input halfway through a take; around 22% of consumers put connection and workflow first.
A complete desk setup Compare what’s in the box with what you already have, and check that you can position the microphone at your preferred speaking height. If I want to get started without buying extra items separately, I look for a suitable stand, cable and any other accessories I need; around 14% of consumers put a complete setup first.

Common buying mistakes

  • Assuming the NT-USB and NT-USB+ are the same model

    The USB-C and monitoring details RØDE gives for the NT-USB+ do not automatically apply to the older NT-USB.

    Before buying, check the full model name on the product page and packaging.

  • Assuming automatic audio processing guarantees a flawless recording

    Features such as automatic level control or protection against clipping are no substitute for checking your recording. Audacity advises lowering the recording level if the meter enters the yellow or red zone during a test.

    Test your loudest lines beforehand too, and keep an eye on the meter and listen through your headphones during the take, where possible.

  • Comparing microphones alone and overlooking the connection or positioning

    The cable you need depends on the ports on your computer. For example, RØDE says that the NT-USB+ needs a suitable USB-C-to-USB-A cable when used with a computer that only has USB-A ports. Accessories vary by package.

    Check your ports, cable and box contents before you buy.

Brands to consider

RØDE

The NT-USB+ is a USB condenser microphone for uses including voice-overs, with direct monitoring and a desk stand and pop filter included.

  • According to RØDE, you can adjust the balance between microphone and computer audio while monitoring.
  • A suitable USB-C-to-USB-A cable is required for a computer with USB-A ports only, according to the manual. The NT-USB+ features do not automatically apply to the older NT-USB.

Samson

The Q2U is a directional dynamic USB/XLR microphone for anyone recording close to the mic or planning to use an XLR setup later.

  • Samson lists direct monitoring and a package that includes a stand, windscreen and cables.
  • Samson positions the model for untreated rooms, but that doesn’t guarantee that unwanted sounds will disappear.

Audio-Technica

The AT2020USB-X is a cardioid USB-C condenser microphone for a fixed voice-recording setup.

  • Audio-Technica lists direct monitoring, a mix control and an included desk stand.
  • A shock mount is listed as an optional accessory. Don’t confuse the AT2020USB-X with other AT2020 versions.

Shure

The dynamic MV7+ is designed to capture clear speech at close range and has USB-C and XLR connections.

  • Shure describes the MV7+ as suitable for close-mic use.
  • The XLR connection offers a possible route to an XLR setup, but it does not in itself prove that the recording will be better in every room.

Elgato

The Wave:3 MK.2 is a USB condenser microphone with controls and built-in processing for managing changes in speaking volume.

  • Elgato lists Auto Gain, Clipguard 2.0 and a headphone output for the Wave:3 MK.2.
  • These features don’t guarantee that a recording will never distort, and they don’t automatically apply to the Wave:3 MK.1.

USB microphones at Joybuy

This selection focuses on USB microphones with direct monitoring or a compact desk setup.

USB condenser microphone with cardioid pattern

USB condenser microphone with cardioid pattern

An option for long takes if you want to monitor the recording through headphones as you go.

Listed features include a cardioid pattern, monitoring through a 3.5 mm headphone output, and a desk arm, shock mount, pop filter, windscreen and USB cable.

View at Joybuy
HyperX SoloCast 2 USB microphone, black

HyperX SoloCast 2 USB microphone, black

Suited to a simple desk setup with a USB connection.

Listed features include a cardioid pattern, USB-C-to-USB-A connectivity, a base, built-in shock mount and pop filter.

View at Joybuy
Razer Seiren V3 Mini, white

Razer Seiren V3 Mini, white

Suited to anyone looking for a compact USB setup with a microphone that can be muted at the touch of a button.

White version; supercardioid recording pattern; tap-to-mute.

View at Joybuy

Frequently asked questions

How can you avoid recording a long take at the wrong level?

First, make a test recording at your usual speaking volume and check the level meter. Audacity advises lowering the recording level if the meter enters the yellow or red zone during the test; listen through the headphone output too, where possible.

What should you save after a long recording?

Save a separate audio copy alongside your editable project. Audacity recommends exporting a WAV or AIFF file straight after recording, before editing, preferably to an external drive.

Do you need an audio interface as well as a USB microphone?

Not for a direct USB connection. However, select the microphone as the input in your recording software; for the XLR connection on a hybrid model, you’ll need a compatible mixer or audio interface.

Can you return a microphone bought online?

When buying from a business at a distance, you generally have 14 days to change your mind; the Dutch government lists some exceptions. Before buying, check the terms that apply to your order and who the seller is.

Can you add film clips or music to your published synopsis?

As a general rule, use copyrighted images and music only with the creator’s permission. The Dutch government states that a private copy for personal use must not be distributed or made public; whether a particular publication falls under a legal exception depends on the circumstances.