For separate takes or one speaker at a time, a cardioid USB microphone placed close to the speaker is a straightforward choice. For actors performing simultaneously when you want to adjust their voices individually, you’ll need a tested setup with one microphone per speaker and suitable multichannel software. A single shared omnidirectional microphone is best when one combined recording is enough and a test recording sounds clear from the actors’ positions. None of these setups removes reverberation by itself: Shure explains that a microphone cannot capture reflections separately from the direct voice.
Who are the different setups for?
Director working with actors performing simultaneously
This director wants to control voices individually while actors perform a scene at the same time. RØDE Connect works with supported microphones, so check compatibility and test the complete computer setup in advance.
Creator recording separate voice takes
This creator records roles one after another and wants speech to come through clearly in the rehearsal room. Shure emphasises that distance and positioning matter: placing a microphone closer to the speaker helps the direct voice stand out against reflections.
Group making a single combined recording
This group wants to record the actors together around one microphone and doesn’t need separate voice tracks. The switchable cardioid and omni modes on the Logitech G Yeti Nano change the recording angle, but they don’t create separate tracks for each actor.
What should you consider when choosing?
Multiple USB microphones
Suitable when: actors perform simultaneously and you want to control their voices individually.
Trade-off: you’ll need compatible microphones and software, as well as enough connections. RØDE recommends using a powered hub with multiple USB microphones.
One cardioid microphone placed close to the speaker
Suitable when: actors record their lines one after another, or one speaker at a time uses a fixed recording position.
Trade-off: placing the microphone close can make the direct voice stand out against room noise, but it won’t remove reverberation.
One shared microphone
Suitable when: one combined recording is enough and the actors sound clear from their actual recording positions.
Trade-off: an omni mode picks up sound from all around and doesn’t let you control each voice separately, so make sure you also consider the room’s acoustics.
| Priority |
What to look for |
Who is this most important for? |
| Separate voices |
Check that the software and all microphones support simultaneous, separate channels. Test the USB connections too. |
When actors perform at the same time, I want to be able to adjust their levels separately. Around 34% of consumers prioritise separate tracks for group voices. |
| Clear speech in a reverberant room |
Compare speaking distances and polar patterns, then listen to a test recording in the rehearsal room. |
When I record separate takes, I want speech to remain clear despite the room noise. Around 33% of consumers prioritise speech clarity over the convenience of recording a group. |
| Recording together around one microphone |
Check that one mixed track is enough and listen to the recording from the actors’ actual positions. |
When the group performs together, I’d rather have one combined recording than separate tracks. Around 20% of consumers prioritise a group recording. |
| Connection and monitoring |
Check the computer and USB connection, the cable you need, and whether the microphone has a headphone output. |
For a straightforward recording, I want to be able to plug in and monitor the sound straight away. Around 13% of consumers prioritise this simple setup. |
Common pitfalls
-
Assuming omni mode will solve reverberation
A microphone that picks up sound from all around won’t automatically separate unwanted reflections from voices. Distance and the acoustics of the rehearsal room still affect what you record.
Only use a shared omni setup after listening to a test recording with the actors in their actual positions.
-
Assuming every USB microphone will work with every other one at the same time
RØDE Connect’s multichannel workflow is for supported devices and requires suitable software and connections.
Check the exact models and test all the microphones working simultaneously on the computer you plan to use for recording.
-
Confusing USB and XLR connections with a complete multichannel setup
The RØDE PodMic USB and Audio-Technica ATR2100x-USB each offer two connection options: USB and XLR. An XLR connection on one microphone won’t, by itself, provide separate channels for an entire cast.
First decide whether you want to record separate takes or multiple voices at the same time, then check what equipment you’ll need for each speaker.
Brands to consider
RØDE
The NT-USB Mini is a compact cardioid USB condenser microphone with a headphone output; the PodMic USB is a dynamic USB and XLR microphone.
- RØDE Connect offers a multichannel option for supported microphones. Check current compatibility and test the complete setup.
- Connecting multiple microphones requires suitable USB ports and software. RØDE recommends using a powered hub with multiple USB microphones.
Shure
The MV7+ has USB-C, XLR and a headphone connection, making it suitable for one speaker with their own recording position.
- USB-C and XLR provide different connection options.
- Shure’s claims about voice isolation are the manufacturer’s claims, not a guarantee that it will sound good in a reverberant rehearsal room. Shure explains that a microphone cannot capture reflections separately from the direct voice.
Logitech G
According to Logitech G, the Yeti Nano has cardioid and omnidirectional modes, for recording a single voice or a group around one microphone.
- You can adjust the recording angle when switching between a single speaker and a shared recording.
- Omni mode doesn’t create separate voice tracks and requires extra care with distance and reverberation.
Audio-Technica
The ATR2100x-USB is a dynamic cardioid microphone with USB-C, XLR and a headphone output. Audio-Technica lists cables and a desktop tripod stand as included accessories.
- USB and XLR connections offer options for recording an individual voice and for a potential XLR setup.
- For an XLR setup, check which suitable input and any additional equipment you’ll need.
Joybuy products
These product choices are aimed at recording separate voice takes with one cardioid USB microphone placed close to the speaker.
No image available
USB condenser microphone with cardioid pickup pattern
The stated cardioid pickup pattern and USB connection make this a good fit for recording separate voice takes with one speaker in a fixed position.
The product title mentions latency-free monitoring, and the product description lists a headphone connection. Check which cable is compatible with your computer.
Joybuy
No image available
Razer Seiren V3 Mini Quartz
The supercardioid pickup pattern and USB connection make this a good fit for recording a separate voice take with one speaker in front of the microphone.
The product title mentions tap-to-mute. Check that this control suits the way you record.
Joybuy
Frequently asked questions
Can you simply record with multiple USB microphones on one computer at the same time?
No, don’t assume you can. RØDE describes a specific workflow using supported devices, RØDE Connect, enough USB connections and channel assignment. Test the number of microphones you intend to use simultaneously on the computer you plan to record with.
Can a microphone help with reverberation in a rehearsal room?
A microphone won’t remove reverberation by itself. Shure explains that a microphone can’t capture reflections separately from the direct voice. Placing it closer to the speaker and making a test recording from the actors’ actual positions will help you judge how your room sounds.
How can you test your recording setup before a long scene?
Make a short test recording with the actors in their actual positions and listen back through headphones. Check that the right USB microphone is selected as the input and that your computer recognises all the microphones you want to use at the same time.
Can you publish recorded voices and an existing script online without permission?
That depends on the recording, the purpose of publication and the rights involved. If you process personal data for anything other than purely personal or household use, you must identify the applicable legal basis under the GDPR; consent is one possible basis. For copyright-protected work by others, such as an existing script or music, the Dutch government states that you need the creator’s permission to use it.