Who are these microphones for?

Solo voice-over creator with a small desk

You want to record a film recap without a large desk setup, and need a microphone that fits beside your screen and script. RØDE’s product information describes the NT-USB Mini as having a detachable stand, among other features.

Voice-over creator in a less-than-quiet room

You can speak close to a dynamic microphone and want to weigh up its position in relation to the room noise. A boom arm is only an option if your desk has a suitable place to attach it; RØDE’s recommended distance for the PodMic USB applies specifically to that model.

Creator who wants to monitor recordings straight away

You want to listen through headphones while recording, or you’re looking for a microphone that could also suit a future recording setup. RØDE and Audio-Technica describe models with a headphone socket; according to Audio-Technica, the ATR2100x-USB also has an XLR connection.

What should you look for when buying?

First decide where the stand or arm can go and whether you can position the microphone directly in front of your mouth from there. Then check the connections and whether you want to monitor your audio as you record.

What to consider What should you check? Who is this important for?
Positioning on a small desk Check how much space the complete setup needs: a desktop stand, screen and script, or a clamp and arm attached to the edge of the desk. If you want to record beside your screen and script, allow space for the whole setup. Around 33% of consumers put a small desk footprint first.
Room noise and speaking distance Check whether you can use the microphone close to you and point it in the right direction. A recommended distance for one model won’t necessarily apply to other microphones. If your room isn’t quiet, you’ll want to position the microphone deliberately close to your voice. Around 27% of consumers prioritise clear speech in their own room.
Direct monitoring Check whether the exact model has a headphone socket, and distinguish headphone volume from recording level. If you want to hear what’s being recorded during a solo session, direct monitoring is an important factor to consider. Around 20% of consumers choose a microphone mainly for this feature.
Connection and future setup Compare your computer’s port with the cable included. Recording to a computer via XLR requires suitable additional equipment. If you want to connect the microphone to your current device or use XLR in future, consider the ports and any equipment you’ll need. Around 20% of consumers prioritise connectivity or expandability.

Common buying mistakes

  • Looking only at the microphone’s dimensions

    A compact microphone takes up little space, but you still need to be able to position it at a usable distance from your mouth.

    Plan where the stand or arm, screen and script will go in advance. If you’re using an arm, check that its clamp will fit on the edge of your desk.

  • Assuming a USB-C port means a USB-C-to-USB-C cable is included

    RØDE lists a USB-C-to-USB-A cable as included with the NT-USB Mini, and describes a different cable for devices with USB-C ports only.

    Compare the ports on your recording device with the cable included with the exact version you’re buying.

  • Mixing up Wave:3 generation specifications

    The listed connections and system requirements for the Wave:3 MK.2 apply to that generation and don’t automatically apply to the MK.1.

    Check the full model name and generation before choosing your microphone.

Brands to compare

RØDE

RØDE describes the NT-USB Mini as a compact USB condenser microphone with a detachable stand, and the PodMic USB as a dynamic USB/XLR model designed for close-up use.

  • According to RØDE, both models have a headphone output.
  • RØDE recommends a distance of around 5–10 cm for the PodMic USB; this advice applies specifically to that model. These features don’t necessarily apply to the brand’s entire range.

Audio-Technica

Audio-Technica positions the ATR2100x-USB for uses including voice-overs, and describes it as having USB-C and XLR connections.

  • The European product information lists a dynamic cardioid microphone with direct monitoring.
  • Check whether an arm will fit your desk and what additional equipment you’ll need if you want to use the XLR connection for computer recordings.

Razer

Razer describes the Seiren V3 Mini as a compact USB microphone with a mute function and a supercardioid condenser capsule.

  • Its small size could suit a compact desktop setup.
  • For direct monitoring, check whether the exact version has a headphone socket; a compact size doesn’t guarantee one.

Elgato

According to Elgato, the Wave:3 MK.2 is a USB-C condenser microphone with a headphone socket and desktop stand.

  • The manufacturer lists system requirements for this specific generation.
  • Check that your computer meets the requirements for the MK.2; don’t assume the same details apply to the Wave:3 MK.1.

Samson

Samson describes the Q2U as a dynamic USB/XLR microphone for a compact desktop setup.

  • Samson lists a headphone socket and a stand as included in the Q2U package.
  • Check that the included stand will hold your microphone in the position you want, at the right distance from your mouth.

USB microphones at Joybuy

This selection includes USB microphones for voice recording: a model with a desk boom arm kit and compact desktop models with stands.

USB condenser microphone with desk boom arm kit

USB condenser microphone with desk boom arm kit

The included arm kit could be a good fit if you want to keep your desk clear and have a suitable place to attach it.

The product description lists a cardioid pickup pattern and a 3.5mm headphone socket for latency-free monitoring.

View at Joybuy
HyperX SoloCast 2 USB microphone, black

HyperX SoloCast 2 USB microphone, black

The compact, adjustable stand could suit a desktop setup if there’s room beside your screen for the microphone.

The product information lists a USB connection, cardioid pickup pattern and mute control.

View at Joybuy
Razer Seiren V3 Mini Quartz USB microphone

Razer Seiren V3 Mini Quartz

Its ultra-compact size could suit a small desktop setup; check that you can position the microphone directly in front of your mouth from there.

The product information lists a USB connection, a supercardioid pickup pattern and tap-to-mute controls.

View at Joybuy

Frequently asked questions

Do you need an audio interface as well as a USB microphone?

Not for a direct USB connection to the models discussed here. If you later want to use the analogue XLR output to record on a computer, check what type of compatible interface or mixer you’ll need.

What should you set up before recording your first film recap?

Select the connected microphone as your audio input and make a short test recording. RØDE also describes how to select the audio output for the NT-USB Mini. For the PodMic USB, RØDE specifically recommends pointing it towards your mouth from a distance of around 5–10 cm.

What are your rights when you buy a microphone online?

According to the Dutch government, when you buy at a distance you will generally have a 14-day cooling-off period; check which terms apply to your purchase. You’re also entitled to a product that conforms to the sales agreement. If there’s a fault, the seller must provide a solution, even if a manufacturer’s warranty is offered.

Can you include film clips or other people’s voices in your recap?

No. Recording your own voice-over for a recap doesn’t automatically give you permission to use protected film clips. According to Auteursrecht.nl, short, relevant quotations from published works may be used under certain conditions; for other uses, you’ll need to check the rights. Privacy rules also apply when publishing other people’s identifiable personal data. This information does not assess any specific film, recording or publication.