Who is this choice relevant to?

Interviewer with two important voices to capture

You want to capture both the life story and your questions clearly. The East Midlands Oral History Archive lists two microphones as an option when the interviewer’s voice would otherwise be too quiet.

Recorder in a reverberant booth

You can record the main speaker at close range, but want to avoid reflections and room noise overpowering the conversation. So check how the recording sounds in the place where the interview will take place.

Interview archive manager

You want to monitor the recording as the conversation takes place and keep a usable file afterwards. The Oral History Society describes uncompressed PCM-WAV as a possible recording setting for archival recordings.

What should you look for when choosing?

For oral history in a small booth, your choice mainly comes down to capturing both voices, the sound of the room, monitoring during recording and a setup that suits the space available.

One shared USB microphone

Suitable when: two people are sitting opposite each other and simplicity matters more than controlling their voices separately.

Bear in mind: one shared signal does not automatically give you two separately controllable voices; make a test recording to check which pattern works.

One microphone close to the main speaker

Suitable when: the interviewee is the main speaker and you can position the microphone close to them.

Bear in mind: the interviewer may sound quieter if they are outside the microphone’s front-facing pickup area; directional placement will not automatically solve reverberation in the booth either.

Two microphones and separate channels

Suitable when: both questions and answers matter, or you need to be able to edit the two voices separately.

Bear in mind: you will need extra microphones and a suitable recorder or audio interface; the Oral History Society describes using a recorder with two external microphones and uncompressed WAV recording.

What to consider What to look for Who is this important for?
Both voices clearly audible Test both seating positions; check the pattern and balance between the voices. I want to capture both questions and answers clearly, so I check both seats; around 36% of consumers put the clarity of both voices first.
Reducing booth noise Listen for reverberation; position the microphone close to the intended speaker. When recording in a small room, I want to know how much reverberation and background noise will be picked up before the conversation starts; around 29% of consumers put reducing booth noise first.
Monitoring and keeping the recording Check headphone monitoring and your recording software settings. I want to monitor the interview as it happens and keep the original file safe; around 21% of consumers put monitoring and preservation first.
Easy to set up Check what mounting hardware is included and whether it connects to your recording device. When I have little time or table space, I want to know in advance whether the setup is practical; around 14% of consumers put ease of setup first.

Common buying mistakes

  • Choosing one directional microphone without testing the interviewer’s voice

    A microphone placed close to the interviewee may pick up questions from further away more quietly.

    Test both seating positions before the conversation. If you want to keep the voices separately, plan for two channels from the start.

    Separate channels may require a second microphone and a suitable recorder or audio interface.

  • Expecting a recording pattern or feature to eliminate booth reverberation

    Microphone placement and the room’s acoustics still affect what gets recorded; a product feature is no guarantee of results in your booth.

    Make a test recording from the intended seating positions and listen for reverberation and distracting noise before the interview starts.

  • Judging only the microphone and forgetting the rest of the recording chain

    You also need a suitable mount, connection and software settings to use the setup and record the conversation.

    Before buying, check what is in the box, whether it connects to your recording device and your recording software settings.

    Depending on your setup, you may also need a stand, headphones, a second microphone or an audio interface.

Brands to consider

Audio-Technica

Audio-Technica describes the ATR2100x-USB as a directional dynamic microphone with USB and XLR connections, suited to a main speaker close to the microphone.

  • Audio-Technica Netherlands lists a headphone output, desk stand and included cables for this model.
  • Test the voice of an interviewer speaking from outside the front of the microphone; its directional pickup may make their voice sound quieter.

Logitech G

The Logitech G Yeti is a USB desk microphone with multiple recording patterns, so you can choose one to suit your conversation setup.

  • Logitech G lists pattern selection, gain control and direct headphone monitoring.
  • A shared microphone does not automatically provide separate tracks for the interviewer and interviewee; test which pattern captures both voices in the booth.

RØDE

The RØDE PodMic USB combines USB and XLR connections for close-miked speech, with the option of adding an interface to your setup later.

  • RØDE lists direct headphone monitoring, internal shock mounting and a pop filter.
  • Check what mount you need for your table setup, and do not assume it will clearly capture a second speaker outside the microphone’s directional pickup area.

Shure

The Shure MV7+ combines USB-C and XLR connections with headphone monitoring and adjustable recording features for speech recorded close to the microphone.

  • Shure lists automatic level control and digital noise processing as features of this model.
  • These are Shure’s claims, not independent measurements in a small booth; check device and app compatibility, and make a test recording of both voices.

HyperX

The HyperX SoloCast 2 is a compact USB condenser microphone with cardioid pickup, designed for a main speaker at a desk.

  • HyperX lists a built-in stand, pop filter and shock mounting.
  • Make a test recording to check whether the interviewer is also clearly audible from their chosen seat.

Joybuy products

The Joybuy options below range from USB desk microphones to wireless Type-C lavalier microphones. Check that each model’s connection is suitable for your recording device, and test that both voices are captured clearly before the conversation.

USB condenser microphone with cardioid pattern

USB condenser microphone with cardioid pattern

Could suit USB voice recording; test both speaking positions to hear whether the interviewer and interviewee are picked up clearly.

The product title specifies a cardioid recording pattern.

View at Joybuy
HyperX SoloCast 2 USB microphone, cardioid, black

HyperX SoloCast 2 USB microphone

For a USB desk setup with one main speaker; make a test recording to check whether the second voice is picked up clearly too.

The product title specifies USB and a cardioid pattern.

View at Joybuy
Razer Seiren V3 Mini Quartz USB microphone with tap-to-mute control

Razer Seiren V3 Mini Quartz

Could be suitable if you’re looking for a small USB microphone; make a test recording from both seats before recording the conversation.

The product title specifies an ultra-compact USB microphone with tap-to-mute control.

View at Joybuy
Verbex K9-Black wireless mini lavalier microphone with Type-C connection

Verbex K9-Black wireless lavalier microphone

An alternative for a portable interview setup; check in advance that the Type-C connection is compatible with your recording device.

The product name specifies a wireless lavalier microphone with a Type-C interface.

View at Joybuy
Verbex ST5 wireless dual-mic lavalier microphone with Type-C interface

Verbex ST5 dual-mic Type-C lavalier microphone

Could be worth considering for a wireless interview setup; check which devices are compatible and how the voices are captured.

The product title specifies a wireless dual-mic lavalier microphone with a Type-C interface.

View at Joybuy

Frequently asked questions

Is one microphone enough to record an interviewer and interviewee?

It can be, as long as both voices are clear in a test recording from their actual seating positions. If you want to control or keep the voices separately, choose a recording chain that supports two external microphones and separate channels.

How do I check the setup before a long conversation?

Record a short conversation from the intended seating positions and listen to both voices through headphones. Check for distortion, quiet passages, table noise and reverberation, and adjust the microphone placement or room if needed before the interview starts.

Does a USB microphone automatically create a file suitable for keeping?

No, the recorder or recording software determines the file format. The Oral History Society lists uncompressed PCM-WAV at 44.1 kHz/16 bit or 48 kHz/16 bit as possible settings for a suitable recorder; check your own recording settings and keep the original.

What can I expect from the seller if my microphone is faulty?

According to the Dutch government, when you buy as a consumer in the Netherlands, you are entitled to a product that is fit for purpose, and the seller must provide a solution if there is a fault. There is no fixed statutory guarantee period in the Netherlands; what you can reasonably expect from a product depends, among other things, on the product and how it is used. A manufacturer’s guarantee is in addition to this.

Can I record or publish an identifiable oral history interview without consent?

An identifiable audio recording can be personal data. If the GDPR applies to your processing, you need a valid lawful basis; consent is one possible basis, but not automatically the only one. For publication online, the Dutch Data Protection Authority generally refers to consent, with exceptions such as use exclusively for personal or household purposes. Whether you can record and publish without consent in your situation depends on the purpose, your role and how the recording is shared.