Recording a script with room noise
You record spoken directions while sounds such as a fan or noise from another room may be audible. Pay attention to microphone placement and listen back to a short test recording.
If you can speak close to the microphone, a cardioid dynamic USB microphone is a sensible starting point for recording a walking-route script. Make a test recording with the usual room noise: noise reduction can help with steady sounds such as a fan, but it won’t simply remove background voices or sudden noises.
You record spoken directions while sounds such as a fan or noise from another room may be audible. Pay attention to microphone placement and listen back to a short test recording.
You want to get started using USB, without a separate audio interface. Check that the cable, stand and controls will work with your desk and computer.
You want to check through headphones while recording whether any words or unwanted noises need another look. So check the headphone socket and the controls on each model.
Suitable if: you’re only recording a script, can sit close to the microphone and want a simple USB set-up.
Trade-off: good placement still matters; a directional pickup pattern won’t make background noise inaudible.
Suitable if: steady room noise is an issue and you want extra recording settings to adjust.
Trade-off: Shure says the MV7+ noise reduction does not remove background voices or sudden sounds such as keyboard clicks.
Suitable if: a simple desk set-up with controls on the microphone is important to you.
Trade-off: make a test recording in your own room to decide whether the room noise sounds acceptable for your script.
| What to consider | What to look for | Who it matters to |
|---|---|---|
| Clear speech | Check the pickup pattern and whether you can speak close to the microphone; listen back to a test recording with the usual room noise. | If you’re recording your script at home with background noise, you’ll want to judge whether your voice remains easy to follow. Around 42% of consumers put clear speech above room noise first. |
| Easy to connect and set up | Check your computer’s port and whether the right USB cable and a stand are included. | If you want to get started at your desk without extra equipment, the connection and included accessories matter. Around 25% of consumers give easy connection and set-up top priority. |
| Check your recording as you go | Check whether the microphone has a headphone output and suitable volume controls; make a short test recording. | If you want to hear any words or interference while recording, monitoring through headphones is a practical consideration. Around 17% of consumers put recording monitoring first. |
| Use XLR later, too | Check whether the exact model has both USB and XLR; an XLR connection on its own is not a USB connection. | If you want to expand your recording set-up later, check that both connections are available. Around 16% of consumers give the option to record via XLR later top priority. |
Shure distinguishes between steady noise and sudden sounds or voices. According to Shure, the MV7+ Real-time Denoiser is designed for steady sounds such as fans; don’t expect it to remove background voices or short noises.
Record a short section while the usual room noise is present and listen back. If it’s suitable for the model, speak close to the microphone.
If you only notice unwanted sounds after a long recording, you may have to record some sections again.
To record directly via USB, the model you choose must actually have a USB connection. An XLR connection alone isn’t enough.
Check the full model name and the connections on the specific version before you order.
Stands and cables vary by model and version. As a result, your desk set-up may need different accessories from the ones you expect.
Check which cables and stand are included with the exact version, and whether the cable is compatible with the port on your recording device.
According to Samson, the Q2U is a dynamic cardioid USB/XLR microphone for spoken-word recording.
According to its European product information, the ATR2100x-USB combines a dynamic cardioid microphone with USB-C and XLR.
According to RØDE, the PodMic USB combines USB-C and XLR with digital signal processing and direct headphone monitoring.
According to Shure, the MV7+ combines USB-C and XLR with adjustable features, including Auto Level and Real-time Denoiser.
According to Sennheiser, the Profile USB is a USB-C condenser microphone with on-device controls.
Below are Joybuy microphones with a USB or USB-C connection for spoken-word recording. Check the exact connection for each model and make sure the set-up described will work with your computer and desk.
No image available
A wireless USB-C microphone to consider if you’re looking for a wireless set-up for spoken-word recording.
USB-C connection; wireless microphone.
No image available
An option if you’re looking for a cardioid-pattern USB condenser microphone for voice recording.
USB condenser microphone; cardioid pattern; headphone monitoring according to the product title.
No image available
A USB microphone to consider if you’re looking for a microphone for voice recording with a compact desk set-up.
USB connection; cardioid pattern; mute control.
No image available
A compact USB microphone to consider if you have limited desk space and want a mute control.
USB microphone; tap-to-mute; Quartz version.
Speak into the front of a cardioid microphone and, if possible, point it away from the source of the unwanted noise. For the PodMic USB, RØDE recommends a speaking distance of around 5–10 cm; this distance won’t necessarily suit other models. Record a short section of your script first and listen back.
Don’t count on it. Shure says the MV7+ Real-time Denoiser is designed for steady sounds such as fans, and does not remove background voices or sudden noises.
Not for recording directly via USB on a compatible computer. However, check the connection and cable for the exact model, as well as any computer requirements for the software you want to use.
According to the Dutch government, when you buy from a business at a distance as a consumer, you usually have a 14-day cooling-off period. Check the seller’s information and any applicable exceptions; this is separate from your rights if a product is faulty.
According to the Dutch government, you should contact the seller about a faulty product. There is no fixed statutory guarantee period; what you can expect from a product depends, among other things, on the product itself and the information provided at the time of sale.