Which setup is right for you?

Recording next to an audible PC

For anyone recording at a fixed workstation who wants their voice to remain clear while the fan is running. Shure emphasises the importance of the distance between the speaker and microphone; RØDE recommends speaking from around 5–10 cm away when using the PodMic USB.

Recording voice and screen together

For creators who want to use the microphone as an input on their computer and monitor the audio while recording. Check that the connection is compatible with your computer and recording software.

Recording somewhere else

For creators who want to record away from their computer setup and can transfer and sync the audio files later. Zoom and Tascam describe models that can also function over USB.

What should you look for when choosing?

When making a software tutorial with audible fan noise, your choice mainly comes down to speech clarity, your computer workflow, where you’ll record and how much editing you’re prepared to do.

USB microphone, optionally with XLR

Best for: recording at a fixed spot by your computer and capturing audio directly in your recording software.

Bear in mind: you may need a suitable stand or boom arm; features can vary depending on the connection you use.

XLR microphone with an audio interface

Best for: if you already have a suitable interface or want the flexibility to replace the microphone and interface separately.

Bear in mind: you’ll need an interface and XLR cable as well as the microphone; XLR itself does not remove fan noise.

Standalone recorder

Best for: recording somewhere quieter, away from your computer.

Bear in mind: you’ll need to transfer the files and sync the voice-over with the video later.

What to consider What to look for Who should pay particular attention?
Clear speech Try the microphone at the distance you plan to use, with the fan on. Check its polar pattern and whether you need a suitable stand or boom arm. I want my voice to stay clear while the fan is running, without relying on software to remove all the noise. Around 36% of consumers prioritise speech clarity when there’s fan noise.
Computer workflow Check the connection and compatibility with your computer and recording software. Also check whether you need a stand or boom arm. I want to record my voice directly on my computer while demonstrating the software. Around 29% of consumers prioritise a direct computer workflow.
Recording somewhere else Check that the recorder can record independently, what storage and power it needs, and how to transfer files. If the fan by my computer is still audible, I want to be able to record somewhere quieter and sync the audio later. Around 14% of consumers prioritise the freedom to choose where they record.
Monitoring and editing noise Check which digital features work with the connection or recording mode you’ve chosen. Listen back to a test recording and assess the effect on your voice. I want to be able to check during or after recording whether constant noise can be reduced, without making my voice sound unnatural. Around 21% of consumers prioritise recording checks and post-production.

Shure describes microphone distance as an important factor when dealing with background noise. Audacity explains how to reduce constant sounds such as fan noise, but warns that the results may be unsatisfactory if the noise is loud or your voice is barely audible above it.

Common buying mistakes

  • Assuming noise reduction means microphone placement doesn’t matter

    Post-production may not help enough with loud or variable fan noise, especially if your voice is barely audible above it.

    Record close to the microphone and listen to a test recording with the fan on before deciding what processing you need.

    Test recordings and post-production take extra time; sometimes you’ll need to record a take again.

  • Treating USB, XLR and standalone recording as interchangeable

    You can’t connect an XLR microphone directly to a computer as a USB input without an interface. A standalone recorder makes a separate recording that you’ll need to sync with the video later.

    Choose your recording workflow first, then check which connections and processing features work with it for each model.

    An XLR setup requires an interface and cable; a separate recorder means extra work transferring and syncing files.

  • Assuming a recording format or firmware feature guarantees noise removal

    32-bit-float recording won’t make fan noise inaudible by itself. On the Zoom H1essential, AI Noise Reduction depends on the firmware and recording mode.

    Check the firmware and selected mode on the exact device, then listen to the recording before and after processing.

Brands to consider

RØDE

The PodMic USB is designed for recording at a computer and offers USB-C and XLR connections.

  • RØDE specifies a dynamic cardioid capsule, headphone output and pop filter for the PodMic USB.
  • RØDE recommends speaking from around 5–10 cm away when using this model. Check that you have a suitable stand or boom arm, and whether the fan is still audible.

Shure

The MV7+ combines USB recording with adjustable digital processing and an XLR output.

  • Shure describes automatic level control and a denoiser for use over USB.
  • According to Shure, these DSP features are not applied to the XLR signal. You’ll need an interface to record over XLR on a computer; the processing described does not guarantee that fan noise will disappear.

Zoom

The H1essential is designed for standalone recording and can also be used as a USB microphone.

  • Zoom specifies built-in X/Y microphones, recording to a card and a USB microphone mode.
  • According to the Zoom manual, AI Noise Reduction does not work in USB microphone mode or when recording MP3. The feature was added in firmware 2.00.

Tascam

The DR-05XP is a standalone stereo recorder that can also be used as a USB audio interface.

  • Tascam specifies built-in omnidirectional condenser microphones, 32-bit-float recording and four low-cut options.
  • The built-in microphones pick up sound from multiple directions, so their position in relation to the fan still matters. 32-bit float is not noise reduction in itself.

Elgato

The Wave DX is an XLR microphone for creators who want to use an audio interface.

  • Elgato describes a separate Noise Removal effect for Wave Link that can filter out sounds including fan noise.
  • The Wave DX has an XLR output and is not a direct USB solution without an interface. How the separate software effect works depends on your setup; its results have not been established for this tutorial recording.

Products at Joybuy

This selection includes USB microphones for recording at a computer and digital voice recorders for separate recordings. Check that each model’s connection and features suit your recording workflow.

USB condenser microphone with cardioid pattern and monitoring

USB condenser microphone with cardioid pattern

A USB microphone for anyone who wants to record their voice and software at a computer.

The product title mentions a cardioid pattern and latency-free monitoring.

View at Joybuy
HyperX SoloCast 2 USB gaming microphone

HyperX SoloCast 2 USB gaming microphone

A USB microphone for anyone who wants to record their voice using a computer.

The product title mentions a cardioid pattern and plug-and-play; the colour is black.

View at Joybuy
Rexsun L357 digital voice recorder, 128GB

Rexsun L357 digital voice recorder, 128GB

A digital voice recorder for anyone who wants to capture audio separately.

The product title mentions 128GB, an LCD screen and model L357.

View at Joybuy
Rexsun L810 digital voice recorder, 64GB

Rexsun L810 digital voice recorder, 64GB

A digital voice recorder for anyone who wants to capture audio separately from their screen recording.

The product title mentions 64GB, one-button operation and model L810.

View at Joybuy
Razer SEIRÉN V3 MINI Quartz USB microphone

Razer SEIRÉN V3 MINI Quartz USB microphone

A compact USB microphone for anyone who wants to record their voice directly on a computer.

The product title mentions tap-to-mute.

View at Joybuy

Frequently asked questions

Will recording in 32-bit float make fan noise disappear?

No. 32-bit float does not separate fan noise from your voice by itself. Position the microphone carefully and listen to a test recording; post-production can reduce constant noise, but it may also have a noticeable effect on your voice.

How can I reduce constant fan noise after recording?

Audacity describes using a noise profile from a section containing only the unwanted sound, then applying noise reduction gently and listening back. According to the Audacity manual, the results may be unsatisfactory if the noise is loud or variable, or if your voice is barely audible above it.

Does AI Noise Reduction work on the Zoom H1essential when it’s connected as a USB microphone?

No. According to the Zoom manual, AI Noise Reduction does not work in USB microphone mode or when recording MP3. The feature was added in firmware 2.00 and is switched off by default after start-up.

What are my rights when buying a microphone online in the Netherlands?

According to ACM ConsuWijzer, online consumer purchases generally come with a statutory 14-day cooling-off period from delivery, subject to applicable exceptions. The product must also do what you could reasonably expect under normal use; the statutory guarantee is not simply a fixed two-year period.

Can my software tutorial show other people’s identifiable information?

If you collect or use personal data, the Dutch Data Protection Authority says you need a valid legal basis under the GDPR; consent is one possible basis. Whether a particular basis applies depends on the data and how you use it. Hide sensitive information before publishing.