Creator recording in a noisy home
If you’re recording just one ident, compare models designed to be used close up and pointed towards you. A suitable pickup pattern is no substitute for a quiet room or careful positioning.
In a noticeably noisy room, it’s worth comparing dynamic microphones that you can position close to your mouth and point towards you. In a quiet room, a condenser microphone with easy-to-adjust gain and monitoring may be a good fit. Record both quiet and powerful lines as a test, then check for clipping, plosives and microphone placement. USB/XLR is mainly relevant if you might also want to use a mixer or audio interface later.
If you’re recording just one ident, compare models designed to be used close up and pointed towards you. A suitable pickup pattern is no substitute for a quiet room or careful positioning.
For a mix of quiet and powerful lines, it’s helpful to check the gain, plosives and headphone signal during test recordings.
If you want to record one voice straight to a computer, check the controls and find out which stand, cable and other components are included with the version you’re considering.
Start with your recording space and how you want to position the microphone. Then compare how you can check the gain and monitoring during a test recording. Choose USB/XLR only if you also want to use an XLR setup.
The percentages below show, for each row, the share of consumers who consider that need their top priority when buying a microphone to record a single spoken radio ident.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Clarity in your recording space | Compare the pickup pattern and positioning; test the microphone where you plan to use it. | If I’m recording in a room with noticeable background noise, I want my voice to come through clearly. Around 31% of consumers say clarity in their own space is their top priority when buying. |
| Quiet and powerful lines | Check the gain controls and record your loudest line as a test, too. | When I switch between whispered and powerful lines, I want to be able to check the levels and listen back to the recording. Around 25% of consumers prioritise level control for an expressive delivery. |
| Plug-and-play USB setup | Check the USB connection and which cable, stand or arm is included with the version you’re considering. | If I want to record one voice on my computer without any fuss, I want to know in advance which components I’ll actually need. Around 25% of consumers choose a direct USB setup as their top priority. |
| Monitoring and playback mix | Check whether the model has a headphone output and, if needed, a mix control. | When I use a backing track while recording, I want to be able to hear both my voice and the track. Around 19% of consumers prioritise monitoring or the playback mix. |
Software claims alone don’t tell you how a microphone will perform in your room. The direction you speak from and your distance from the microphone also affect what it picks up.
Make a test recording where you plan to record your ident, then listen back through headphones.
The stand, arm or cable may vary between versions. For example, the standard Sennheiser Profile and the Profile Streaming Set don’t include the same mounting hardware.
Before buying, check the exact version and the list of included components. The PodMic USB has an integrated mount, but check what mounting hardware you’ll need for your setup.
If the right arm or stand isn’t included with the set you choose, you may need to arrange one separately.
Audio-Technica lists a maximum of 24-bit/96 kHz for the AT2020USB-X. That specification alone won’t tell you how a particular ident will sound.
Compare the controls too, and make a test recording with your own voice in your own recording space.
The NT-USB Mini is a compact option for desk recording. The dynamic PodMic USB also has an XLR connection, should you want to use a mixer setup later.
The dynamic MV7+ combines USB-C and XLR, making it worth comparing if you want recording controls and the option of adding a mixer setup later.
The AT2020USB-X is a cardioid USB condenser microphone for anyone who wants to control monitoring and the balance between their voice and playback audio.
The Profile is a USB-C condenser microphone with controls for gain, mix and headphone volume.
The SoloCast 2 is designed for a compact USB setup with one speaker.
These Joybuy options are USB microphones for a straightforward voice-recording setup. Check which controls and connections each model offers to make sure they suit the way you record.
No image available
An option to compare if you’re looking for a USB condenser microphone for voice recordings.
The product name mentions a cardioid pickup pattern and latency-free monitoring.
No image available
A compact USB microphone to compare if you’re looking for a simple desk setup.
The product name mentions tap-to-mute; this version is White.
Record both your quietest and your most powerful line, then listen back through headphones. Adjust the gain or microphone position if needed, and check for plosives separately, even if the microphone has a built-in filter.
You don’t need a separate audio interface straight away to record over USB with the RØDE PodMic USB or Shure MV7+. To use the XLR connection, however, you’ll need a suitable analogue recording chain. Also check which cables and mounts are included with the version you choose.
Point the microphone towards the speaker and check that the stand or arm is stable. The RØDE PodMic USB manual describes mounting on 3/8- and 5/8-inch threads. Follow the manual for the model you’re using when positioning and connecting it.
For an online purchase by a consumer in the Netherlands, there is generally a 14-day cooling-off period after delivery, according to ACM ConsuWijzer. If a product is faulty, the seller must provide a solution, according to the Dutch government (Rijksoverheid). If the station is buying the microphone mainly for business use, consumer rules don’t automatically apply; ACM ConsuWijzer explains this distinction.
Don’t assume you can do so without permission. BumaStemra states that a licence is required to use music in radio programmes. The permissions needed for a particular track, production and broadcast depend on how it’s used; choosing a microphone doesn’t grant music rights.