Who is this buying guide for?

Hi-res listeners with wired headphones

You play your own audio files and want to check that your computer, the DAC’s format support and your headphone connection are all compatible.

Listeners using two monitors

You want to be able to select the right audio output once the DAC is connected. The number of monitors mainly affects that setting, not the number of DAC outputs.

Listeners who use both headphones and speakers

You want to switch between wired headphones and active speakers at the same desk, so you’re looking at line outputs and volume controls.

What should you look for when choosing?

Start with the connection and audio formats you need. Then decide whether a compact DAC will do or whether you’d like speaker connections and on-device controls.

What to consider What should you look for? Who is this important for?
File and source compatibility Check the files and playback software you use, the USB connection and the audio formats supported by the DAC. If I want to play hi-res files, I need to know whether the entire audio chain is compatible with them; around 29% of consumers put compatibility first.
Headphone compatibility Check that the output matches your headphone plug. Only compare stated power ratings when the output and load are the same. If I want to keep using my current wired headphones, the right connection is essential; around 29% of consumers start by checking headphone compatibility.
Audio output with two monitors Once connected, select the audio output you want on your computer and, where applicable, in your playback software too. If my computer shows several output devices, I want to avoid selecting the wrong one; around 24% of consumers prioritise this choice of output. Microsoft Support recommends selecting the device you want when several audio outputs are available.
Space, connections and power Decide whether you need an RCA line output for active speakers and check the power specification for the exact model. If I want to connect active speakers as well as headphones, connections, available space and power all matter; around 18% of consumers make their desk setup the most important criterion.

Things to watch out for when buying

  • Assuming a higher maximum kHz figure guarantees better sound

    The maximum audio format indicates what a model supports, but it doesn’t tell you which format your computer and playback software will actually output. Microsoft Support warns that an unsupported or incorrect audio format can cause sound problems.

    Check your files, playback software, output settings and headphones. Don’t use the maximum sample rate as your only selection criterion.

  • Assuming two monitors require two DAC outputs

    Using several monitors doesn’t automatically mean you need several DAC outputs. Microsoft Support recommends selecting the device you want when more than one audio output device is available.

    Select the DAC as your computer’s audio output, then separately check whether you also want to connect active speakers.

  • Choosing a desktop model without checking its power requirements

    Power requirements vary by model. FiiO specifies DC 12V/2A for the K11; the iFi manual says the ZEN DAC 3 can be powered via USB or a separate 5V power supply.

    Check the power specification, what’s included with the specific offer and the connections available before you order. According to the iFi manual, the separate 5V power supply is not included.

Relevant brands to compare

FiiO

The K11 is a desktop model with headphone and RCA line outputs, while the KA13 is a more compact USB-C model.

  • According to FiiO, the K11 supports up to 32-bit/384 kHz PCM and DSD256 over USB. It requires a DC 12V/2A power supply.
  • FiiO says the KA13 has 3.5mm and 4.4mm outputs. Its stated power output depends, among other things, on desktop mode and load.
  • These are manufacturer specifications, not the results of an independent listening test. Check that the connections and power supply suit your setup.

iFi audio

The ZEN DAC 3 is a USB desktop model for anyone who wants to use headphones and active speakers together.

  • The iFi manual lists 6.3mm and 4.4mm headphone outputs, plus an adjustable RCA output.
  • According to the manual, the model can be powered via USB or a separate 5V power supply.
  • The separate power supply is not included, according to the manual. Stated format limits don’t guarantee an audible difference.

Fosi Audio

The DS2 is a compact USB-C DAC for wired headphones when extra desk connections aren’t a priority.

  • Fosi lists 3.5mm and 4.4mm headphone outputs and volume buttons.
  • According to Fosi, the DS2 supports up to 32-bit/384 kHz PCM and DSD256.
  • The manufacturer’s sound claims are not independently verified listening results.

Joybuy product selection

This selection is for wired listening via USB-C. Check that your device supports USB-C audio; the product shown is a headset with a built-in DAC, not a standalone desktop DAC.

Samsung EO-IC100 wired USB Type-C in-ear headset, black

Samsung EO-IC100 wired USB Type-C in-ear headset, black

For wired listening via USB-C; the product description lists a built-in DAC. Check that your device supports USB-C audio.

Joybuy

Frequently asked questions

Do I need a DAC with two outputs for two monitors?

No, not just because of the number of monitors. If your computer offers several audio output devices, select the USB DAC as the output you want. This doesn’t establish support for simultaneous output to different devices.

How do I connect a USB DAC, and what should I check if there’s no sound or it crackles?

Connect the DAC as described in the manual and select it as your computer’s audio output. If you have problems, check the connection, the selected output and whether the audio format is supported. FiiO’s K11 instructions also mention checking the output setting in your playback software.

Do desktop models always need a separate mains power supply?

No, power options vary by model. FiiO specifies DC 12V/2A for the K11; according to the iFi manual, the ZEN DAC 3 can be powered via USB or a separate 5V power supply. Check what’s included with the specific offer.

What are my rights in the Netherlands if a DAC bought from an online shop turns out to be faulty?

When you buy as a consumer, you’re entitled to a product that meets the required standards, and the seller is your point of contact if there’s a fault. According to the Dutch government, the Netherlands has no fixed statutory guarantee period. For eligible distance sales, you generally have 14 days to change your mind; check the terms and legal exceptions that apply to your purchase.

What should I look for in terms of product safety when buying in the Netherlands?

CE rules apply to product categories covered by specific EU legislation; the relevant requirements depend on the product and the legislation that applies to it. The European Union sets out the scope of CE marking. Check the product information and use the specified power supply; this alone does not establish that a particular item is compliant.