Who is a USB headphone DAC suitable for?

Listener with few spare sockets

You play music from a phone or computer and don’t want to use a separate mains adaptor. Creative Worldwide Support specifies USB bus power for the Sound Blaster PLAY! 4, while FiiO specifies an external power supply for the K11.

Listener who needs to check connections

You want to check that your source’s USB connection and your wired headphones’ plug are compatible with the DAC. According to their manufacturers, models such as the FiiO KA13 and MOONDROP DAWN PRO 2 have both 3.5mm and 4.4mm outputs.

Listener with demanding headphones

You compare the output and specified load, not just the highest power rating. Testaankoop describes a DAC test using headphones with different impedances, so check which specification applies to your headphones and the output you’re using.

What should you look for when buying?

First, check the power supply and connections. Then compare support for your files, and finally check the output power for your headphones. The percentages below relate to consumers looking for a USB headphone DAC for hi-res files in this listening setup, with few spare sockets.

Consideration What to look for Who is this more important to?
No extra socket needed Check whether the exact model is explicitly specified as USB bus-powered; a compact design doesn’t prove this. If I don’t have a spare socket, I don’t want to need a separate mains adaptor. Around 36% of consumers prioritise avoiding the need for an extra socket.
Checking compatible connections Check the USB connection on the source side and the headphone output, such as 3.5mm or 4.4mm. I want to be able to connect both my source and my wired headphones to the DAC. Around 29% of consumers prioritise the connection between the source, DAC and headphones.
Playing your own hi-res files Compare your files’ format, bit depth and sample rate with the DAC, source and playback software. If I mainly play hi-res files, I want to know whether my own formats are supported. Around 21% of consumers prioritise checking that their own files will play.
Powering your headphones appropriately Compare the power rating for the output and load you’ll actually use; don’t assume a rating applies to a different output. I want to match the specifications to my headphones and the output I’m using. Around 14% of consumers prioritise powering their headphones appropriately.

Common buying mistakes

  • Assuming every compact USB DAC is USB-powered

    A compact size doesn’t tell you how a device is powered. Creative specifies USB bus power for the Sound Blaster PLAY! 4, while FiiO specifies an external 12V power supply for the K11.

    Check the power specifications for the exact model before you buy.

  • Assuming the highest output power applies to every connection

    FiiO’s claim of up to 550 mW for the KA13 applies to the balanced output in desktop mode. That figure doesn’t automatically apply to the 3.5mm output.

    Compare specifications for the same output, setting and headphone load.

  • Assuming a high DAC resolution guarantees file playback

    The stated maximums vary by model, and the source and playback software are also part of the playback chain.

    Check your own file format and settings alongside the DAC specifications.

Brands to consider

Creative

The Sound Blaster PLAY! 4 is a compact option to consider if you want to connect a CTIA headset with a microphone.

  • Creative Worldwide Support specifies USB bus power, a 3.5mm CTIA connection and PCM playback up to 24-bit/192kHz for the PLAY! 4.
  • The stated headphone impedance is 16–150 ohms; check that the specifications suit your source and headset.

FiiO

The KA13 is a compact DAC with two headphone outputs; the K11 is a desktop model with more connections.

  • According to FiiO, the KA13 supports PCM up to 32-bit/384kHz and DSD256. The manufacturer specifies up to 550 mW for the balanced output in desktop mode.
  • The power rating applies to that output and mode. The FiiO K11 uses an external 12V power supply, so it needs a separate socket.

iFi audio

The GO link 2 is a compact USB-C DAC for wired headphones with a conventional output.

  • iFi specifies support for PCM up to 384kHz and DSD256.
  • Check the power requirements and connection for the version you choose. A manufacturer’s claim about improved sound doesn’t prove you’ll hear the difference in your setup.

MOONDROP

The DAWN PRO 2 combines a 3.5mm output with a 4.4mm output.

  • MOONDROP specifies that a USB-C cable and USB-A adaptor are included.
  • Output power depends on the specified load; don’t apply a rating to a different output or load without checking.

AudioQuest

The DragonFly Cobalt is a USB DAC and headphone amplifier with a 3.5mm output.

  • AudioQuest specifies support up to 24-bit/96kHz and lists a USB-C extension cable in the product information.
  • AudioQuest describes the sound as cleaner or clearer; that’s the manufacturer’s claim, not a guarantee for your source and headphones.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a spare socket for every USB headphone DAC?

No, it depends on the model. Creative Worldwide Support specifies USB bus power for the Sound Blaster PLAY! 4, while FiiO specifies an external 12V power supply for the K11. Check the power specifications for the exact model.

How do I connect a compact DAC to play files?

First, check that your source supports USB audio through the connection you’ve chosen. Connect the DAC to the source, then plug your wired headphones into a compatible output. If necessary, select the DAC as the audio output and check the format support and settings in your playback software. According to MOONDROP, a USB-C cable and USB-A adaptor are included with the DAWN PRO 2.

Does hi-res mean all my files will play at their original resolution?

No. The stated maximums vary by model and don’t, on their own, tell you what the entire playback chain will pass through. AudioQuest specifies up to 24-bit/96kHz for the DragonFly Cobalt; FiiO specifies PCM up to 32-bit/384kHz and DSD256 for the KA13. Also check your file format, source and playback software settings.

What can I do if a DAC I bought online is faulty?

In the Netherlands, contact the seller first. According to the Dutch government, the seller must resolve problems with faulty products, for example by repairing or replacing the product free of charge, and cannot simply send you to the manufacturer.

Do I have a cooling-off period when buying online in the Netherlands?

For eligible distance sales to consumers, you generally have a 14-day cooling-off period, according to the Dutch government. There are exceptions, and purchases from private individuals aren’t automatically covered by the same rules; check the terms that apply to your specific purchase.