Who is a USB DAC for?

Listener with limited desk space

Wants to listen to lossless music on wired headphones without adding another device to the desk. Weighs up a compact dongle against the audio output already built into their computer.

Listener with demanding headphones

Wants the connection, volume control and amplification to suit their headphones. Power figures are only useful to compare when the load and output are the same.

Listener with headphones and speakers

Wants to connect active speakers at the same workstation too, so checks the line output and volume control, not just the headphone output.

What should you look for when choosing?

A USB DAC dongle

A good fit if: you mainly listen on wired headphones and want to use as little space as possible. MOONDROP lists the DAWN PRO as measuring 42 × 22,45 × 12,39 mm, with 3,5 and 4,4 mm connections.

Bear in mind: the USB power supply and your headphone connection; a dongle doesn’t offer the RCA line output you’d need for a fixed speaker setup.

A desktop DAC with headphone amplifier

A good fit if: a dedicated volume knob, multiple headphone outputs or a line output for active speakers are important to you. The FiiO K11 has a volume knob, 6,35 and 4,4mm outputs and an RCA line output, among other features; the iFi ZEN DAC 3 has headphone and line outputs.

Bear in mind: the space it occupies and its power supply. FiiO lists the K11 as measuring 147 × 133 × 32,3 mm and requiring a separate 12 V/2 A power supply. The iFi ZEN DAC 3 can be powered via USB; its manual says a separate 5V power supply is not included.

Keeping your existing audio output

A good fit if: your device already drives your headphones at the volume you want and supports the playback you need. Apple lists compatible Macs whose built-in DAC can convert audio up to 96 kHz.

Bear in mind: requirements vary by device and service. Apple says Apple Music on iPhone and iPad requires an external DAC for tracks above 48 kHz; this doesn’t automatically apply to every source or computer.

What to consider What should you check? Who is this important for?
Desk space and cables Compare the dimensions, cable direction and power supply with the space available. MOONDROP lists the DAWN PRO as measuring 42 × 22,45 × 12,39 mm; FiiO lists the K11 as measuring 147 × 133 × 32,3 mm and specifies a separate 12V/2A power supply. If space is tight, I don’t want a large device or extra cables on my desk. Around 33% of consumers prioritise a compact footprint and simple cabling.
Headphone output and amplification Check that the plug fits and compare gain settings and power only for the same output and load. FiiO lists three gain settings for the K11; iFi lists PowerMatch for the ZEN DAC 3. Anyone using specific headphones wants a suitable connection and practical volume control, even if that means a larger device. Around 27% of consumers give headphone compatibility top priority.
Source and playback settings Check the resolution offered by your music service, whether lossless is enabled and which audio output the player uses. Apple lists Apple Music on Windows as supporting lossless up to 24-bit/48 kHz and high-resolution lossless up to 24-bit/192 kHz; TOPPING warns that software may resample the signal before it reaches the DX1 II. If I want to know what my source is actually playing, I check the player settings too, not just the maximum figure on a DAC. Around 20% of consumers prioritise the lossless chain and source settings.
Connecting active speakers Check the type of input on your speakers and whether you can control the volume where you want to. The FiiO K11 has an RCA line output; the iFi ZEN DAC 3 offers fixed and variable analogue outputs. According to iFi’s manual, the volume knob is bypassed for that output when it’s set to fixed. Anyone using headphones and active speakers at the same workstation wants to connect them easily and control the volume conveniently. Around 20% of consumers make speaker connectivity their top priority.

Buying pitfalls

  • Choosing based on a high maximum sample rate

    A high figure on the packaging doesn’t prove that your music service, device and settings will deliver the same signal. Apple distinguishes between lossless up to 24-bit/48 kHz and high-resolution lossless up to 24-bit/192 kHz for Apple Music on Windows.

    Check which version of the music is available, whether lossless is enabled and which audio output the player uses. A capability your source can’t make use of doesn’t have to be a deciding factor.

  • Comparing power figures without checking the output and load

    A device’s power specifications can vary depending on the output and load; a higher figure isn’t automatically necessary for your headphones.

    Compare the specification for the output you can actually use, and check the stated load and measurement conditions. Start at a low volume.

    A balanced output may require a compatible headphone cable.

  • Assuming every Fosi DS2 is the same version

    Fosi publishes different chipsets and specifications for the DS2 and DS2-2024. The short name DS2 alone doesn’t identify the version.

    Before deciding, compare the full model name in the listing with the specifications on the relevant manufacturer’s page.

  • Assuming a desktop DAC is always powered by a single USB cable

    Power requirements vary by model. FiiO specifies a separate 12V/2A power supply for the K11; the iFi ZEN DAC 3 can be powered via USB, while its manual says a separate 5V power supply is not included.

    Check how the exact model is powered, and make sure you have the necessary connection and space.

    A desktop model may need space near a power socket; also check whether a required power supply is included.

Brands to consider

FiiO

The K11 is a desktop DAC and amplifier for anyone looking for a dedicated volume knob, multiple headphone outputs and an RCA output.

  • FiiO says the K11 has three gain settings and a 4,4mm output; the manufacturer lists power specifications at 32 Ω.
  • The K11 uses a separate 12V/2A power supply. These features apply to this model, not all FiiO products.

iFi audio

The ZEN DAC 3 combines a USB-C input with headphone and analogue outputs, making it suitable for a desk where you might also have active speakers.

  • According to the manual, the ZEN DAC 3 has PowerMatch and 6,35 and 4,4mm headphone outputs.
  • The volume knob doesn’t work for an output set to fixed. The manual says a separate DC power supply is not included.

MOONDROP

The DAWN PRO and DAWN PRO 2 are small USB DACs for wired headphones when desk space is at a premium.

  • MOONDROP lists 3,5 and 4,4mm outputs for both models. The DAWN PRO is listed as measuring 42 × 22,45 × 12,39 mm.
  • Check the full model name: the DAWN PRO’s specifications don’t automatically apply to the DAWN PRO 2.

Fosi Audio

The DS2-2024 is a compact USB-C dongle with 3,5 and 4,4mm headphone outputs.

  • The official product information for the DS2-2024 lists two CS43131 chips and PCM up to 32-bit/384 kHz.
  • A separate Fosi page for ‘DS2’ lists different chips and specifications. So check the full version in the listing.

TOPPING

The DX1 II is a USB DAC for use with a computer.

  • TOPPING’s support information discusses USB power and playback settings for this model.
  • TOPPING warns that some phones may not provide enough power to the DX1 II. The displayed sample rate may also differ from the source file’s if software resamples the signal.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need an external DAC for lossless music?

No, not always. Apple lists compatible Macs that can convert audio up to 96 kHz using their built-in DAC; for Apple Music on an iPhone or iPad, Apple says an external DAC is needed for tracks above 48 kHz. Check the capabilities of your own device, the resolution you want and the requirements of your music service.

Why does my DAC show a different sample rate from the music file?

The player or operating system may resample the signal before it reaches the DAC. According to TOPPING, the DX1 II shows the sample rate of the incoming signal, so check the selected audio output and playback settings too.

How do I connect active speakers to a headphone DAC?

First, check which analogue input your speakers have. The FiiO K11 has an RCA line output; on the iFi ZEN DAC 3, you can choose between fixed and variable analogue outputs. According to the manual, the ZEN DAC 3 bypasses its volume knob for that output when it’s set to fixed.

How can I stop the headphone volume from suddenly being too loud?

Start at a low volume and check the gain setting before listening. iFi advises turning the volume down before changing PowerMatch; the World Health Organization emphasises that both sound level and listening time contribute to the risk to your hearing.

How can I tell which Fosi DS2 version I’m looking at?

Check the full model name and compare it with the corresponding Fosi specifications. The official information for DS2-2024 differs in some respects from that for DS2, so don’t rely on the short name alone.