Who is this guide for?

Listeners comparing recordings

You want to assess recordings without unknowingly switching audio output, settings or listening level. The ITU explains the importance of controlled conditions for subjective listening assessments.

Listeners with wired headphones

You want the output, plug and drive capability to suit your headphones; the stated power depends on the output and load used.

Sit-stand desk users

You switch between sitting and standing and want the device, controls, power supply and cables to work well at your desk.

What should you look for?

Your existing headphone output

A good fit if: your headphones already connect properly and you don’t need to solve a specific connection or control issue.

Bear in mind: you won’t get an extra volume knob or additional outputs; when switching devices, check which audio output is selected.

Compact USB DAC

A good fit if: you want to use as little desk space as possible and its connection and controls suit your headphones.

Bear in mind: a compact model such as the AudioQuest DragonFly Cobalt offers fewer readily accessible desktop connections and controls than the desktop options discussed here.

USB desktop DAC

A good fit if: you need an easily accessible volume knob, a particular headphone output or a connection for active speakers.

Bear in mind: the power supply and cable routing vary by model; the FiiO K11 requires DC 12 V/2 A, while the iFi ZEN DAC 3 can be powered via USB, according to its manual.

DAC with advanced listening settings

A good fit if: you deliberately use different headphones or earphones and want separate outputs and settings.

Bear in mind: EQ and loudness settings need extra attention to keep them consistent when comparing recordings.

What to consider What to check before buying Who is this important to?
Comparing recordings consistently Check that you can deliberately select the audio output and keep the settings and volume consistent. Set any EQ, loudness or bass boost to the same level for every recording. When comparing recordings side by side, I don’t want a different output or sound setting to influence the result. Around 36% of consumers in this listening situation give consistent comparisons top priority.
Headphone connection and drive capability Check the plug, impedance and sensitivity of your headphones, and the output you actually want to use. Only compare stated power ratings at the same load and output. I want to connect my own headphones and know which output and cable I need. Around 29% of consumers put this compatibility first.
Controls, space and power Check that the device, knob and cable routing will work when the desk is raised; also check the power requirements and which accessories are included. When raising and lowering my desk, I want to be able to reach the controls without awkward cable routing. Around 21% of consumers give a practical desk setup top priority.
Managing listening volume Check how to control the volume and start at a low level. Turn the volume down before changing the gain setting. When switching between headphones or gain settings, I want to be able to manage the volume carefully. Around 14% of consumers put predictable volume control first.

Common buying mistakes

  • Comparing the power ratings of different outputs directly

    The stated power depends on the output and load used. A 4.4mm connection also requires a suitable headphone cable.

    Compare specifications at the same load and check that your headphone plug is compatible.

  • Buying a DAC when the wrong computer output is selected

    If several audio devices are available, your computer may send sound to a different output. Microsoft Support recommends checking that the correct output device is selected.

    First check the selected audio output, connections and volume controls in your existing setup.

  • Using a different gain or sound setting for one recording

    Changing the gain, EQ or another sound setting changes the conditions of the comparison. For the ZEN DAC 3, iFi warns you to turn down the volume before changing PowerMatch.

    Keep the settings consistent and turn down the volume before switching gain settings.

  • Assuming every desktop DAC is powered via USB

    According to FiiO, the K11 requires DC 12 V/2 A. The iFi ZEN DAC 3 manual describes USB power and an optional 5V power supply.

    Check the power requirements for the exact version and make sure the cable routing works with the desk both sitting and standing height.

Brands to consider

FiiO

The FiiO K11 is a desktop DAC with a volume knob and several connections, suited to anyone who values convenient controls and connection options in one fixed listening spot.

  • FiiO lists 6.35mm and 4.4mm headphone outputs, an RCA line output and three gain settings for the K11.
  • The K11 requires DC 12 V/2 A; its stated power applies only to the corresponding output and load.

iFi audio

The iFi ZEN DAC 3 is a desktop alternative with USB-C, a volume knob, headphone outputs and an adjustable analogue output.

  • The manual describes USB power and an optional 5V power supply; PowerMatch and XBass+ can be adjusted.
  • Keep the settings consistent when comparing recordings and turn down the volume before changing PowerMatch.

RME

The RME ADI-2 DAC FS is a desktop option for anyone looking for advanced listening settings and separate headphone and IEM outputs.

  • RME lists EQ, loudness and a separate IEM output for this model.
  • Extra settings need attention when comparing recordings, and not every listener needs these features.

AudioQuest

The AudioQuest DragonFly Cobalt is a compact USB DAC and headphone amplifier for anyone looking to keep their desktop setup small.

  • AudioQuest lists computer compatibility, an included USB-C extension cable and a maximum resolution of 24 bit/96 kHz.
  • Check that the connection and controls suit your headphones and computer; claims of better or cleaner sound are not independent test results.

Joybuy products

Related products will be available soon.

Frequently asked questions

How can I keep a recording comparison as consistent as possible?

Use the same headphones and playback route, deliberately select the computer output, and keep the listening level and any EQ, loudness or bass settings consistent. The ITU explains the importance of controlled conditions for listening assessments; this does not guarantee that all audible differences will disappear.

How do I connect a USB DAC without unexpectedly loud sound?

Connect the power supply and USB cable required by the exact model, select the DAC as the audio output and start at a low volume. For the ZEN DAC 3, iFi recommends turning down the volume before changing PowerMatch.

What product regulations apply to a DAC sold in the Netherlands?

Electronic products on the EU market must comply with the applicable CE requirements; electrical and electronic equipment is also subject to RoHS restrictions, unless an applicable exemption applies. These general rules do not prove that a specific version or offer complies.

Can I return a DAC bought online?

For distance purchases from a business, you generally have a 14-day cooling-off period, according to the Dutch government, with some exceptions. Check the terms that apply to the specific seller and purchase.

Do I automatically get a two-year legal guarantee in the Netherlands?

No, there is no fixed statutory guarantee period in the Netherlands, according to the Dutch government. You are entitled to a product that meets the terms of the sale; if there is a problem, contact the seller. A manufacturer’s guarantee is an additional benefit.