Who is this relevant to?

Listeners with hi-res files

If you play high-resolution files, you’ll want to know whether your computer, software and DAC actually support the format you want. A higher DAC specification doesn’t automatically mean you’ll hear an improvement.

Listeners with wired headphones

The connection, usable volume range and power at the relevant load should all suit your headphones. Power ratings are only meaningful to compare when the output and test conditions match.

Listeners with limited desk space

A dongle can save space, while a desktop model may offer extra controls or connections. Also consider where to put a separate adapter and how much room the cables and plugs will take up.

What should you look for?

What to consider What should you check? Who is this important to?
File format and playback chain Compare your file formats with the model’s USB specifications, then check the selected output device and format setting. If I mainly want to play hi-res files, I want to know what my computer and software actually output. Around 31% of consumers prioritise file playback.
Driving your headphones Check the connection and power at the load required by your headphones; only compare ratings measured using the same output and conditions. If my wired headphones need a suitable output and a well-controlled volume range, I’ll check how they work with my own model. Around 31% of consumers prioritise headphone performance.
Space, power and cables Check the dimensions and whether the device is USB-powered or uses a separate adapter. Also allow room for cables and plugs. At a small desk, I want to know how much space the whole setup will take up, not just the unit itself. Around 23% of consumers put a tidy desk first.
Extra connections Decide whether you need a line output for powered speakers, a microphone connection or another specific input or output. If I want to connect other equipment as well as headphones, I’ll check which outputs and settings I need. Around 15% of consumers prioritise extra connections.

Common mistakes

  • Assuming the highest kHz or power rating is the deciding factor

    A higher stated maximum doesn’t, by itself, tell you what your computer and software output or what your headphones need. The FiiO K11’s power ratings also vary by output and load.

    First, compare your files with your current audio output. Then check the USB mode and the power available through the output and at the headphone load you’ll actually use.

  • Looking only at the device’s dimensions

    The power supply and cables take up space too. The FiiO K11 uses a separate 12V/2A power supply, while the Sound Blaster X4 is powered via USB. A separate 5V power supply for the iFi ZEN DAC 3 is not included.

    Measure the space available for the device, plugs and cables, and check whether you already have the power supply you need.

  • Assuming every playback mode supports the same formats

    Creative lists different PCM maximums for stereo playback and certain multi-channel modes on the Sound Blaster X4.

    Check the specifications for the playback mode you actually use.

Brands to compare

FiiO

The K11 is a desktop option for anyone looking to combine USB audio with controls and several connections.

  • FiiO lists USB support for PCM up to 32-bit/384 kHz, 6.35 mm and 4.4 mm headphone outputs, and a separate 12V/2A power supply.
  • The stated 1,400 mW per channel applies specifically to the 4.4 mm output at 32 Ω and under the stated test conditions. Don’t assume this rating applies to every output or pair of headphones.

iFi audio

The ZEN DAC 3 combines headphone outputs with adjustable line outputs, making it suitable for a setup that includes powered speakers, for example.

  • According to the manual, the ZEN DAC 3 supports USB-C, PCM up to 768 kHz and DSD512. It has 6.35 mm and 4.4 mm headphone outputs, as well as RCA and 4.4 mm line outputs with fixed or variable settings.
  • The separate 5V power supply is not included. iFi recommends turning the volume down before changing PowerMatch.

Creative

The Sound Blaster X4 is designed for anyone who wants to use their audio setup with a headset, microphone or other equipment.

  • Creative lists PCM up to 24-bit/192 kHz in stereo mode for the X4, along with a headset connection, microphone input and optical connection.
  • Supported PCM formats depend on the playback mode. Creative lists a headphone output impedance of 10 Ω; compare this with the specifications of your own headphones.

AudioQuest

The DragonFly Cobalt is a USB dongle for anyone looking to take up as little desk space as possible.

  • AudioQuest lists playback up to 24-bit/96 kHz and includes a DragonTail USB-C extension cable.
  • If you use files with a higher native resolution, check how your playback chain handles them.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need an external DAC for hi-res files?

No, not always. Apple Support says that the built-in DAC in certain specifically named compatible Mac computers supports sample rates up to 96 kHz. Check the capabilities of your own computer and headphones, as well as your playback settings; this specification doesn’t automatically apply to other computers.

Why doesn’t my DAC show the file’s sample rate?

Check which output device and format your computer has selected. According to Apple Support, on a Mac you can set the sample rate and bit depth for the selected device in Audio MIDI Setup; the available options depend on the device.

What should I bear in mind when connecting my headphones and starting to listen?

Connect your headphones to the designated output and start at a low volume, adjusting it gradually. iFi specifically advises turning the volume down before switching PowerMatch on the ZEN DAC 3. The World Health Organization points out that both sound level and the duration of exposure affect the risk to your hearing.

What are my rights when buying a DAC online in the Netherlands?

For a standard online purchase, ACM ConsuWijzer says you generally have a statutory 14-day cooling-off period after delivery; exceptions may apply. You’re also entitled to a product that, under normal use, does what you could reasonably expect. If it doesn’t, the seller must put things right free of charge, according to ACM ConsuWijzer; this is not simply a fixed two-year period.

Is checking for a CE mark essential when buying any USB DAC?

Not for every USB DAC without exception: according to the European Commission, CE marking is only required when specific applicable EU rules say so. Whether this applies to a particular product depends on the relevant rules and its exact design, so this information doesn’t provide a definitive compliance assessment for individual models.