What should you look for?
Start with a suitable headphone output and a way to keep playback volume consistent while comparing. Then add only the connections you’ll actually use.
| Concern |
What to check |
Who is this important for? |
| Assess recordings at a comparable level |
Check whether your playback software can measure or normalise loudness, and whether you can maintain a consistent listening volume. A DAC won’t automatically normalise source files. |
When I compare recordings, I don’t want to mistake differences in loudness for differences in sound. For around 36% of consumers, comparing at the same playback level is the top priority. |
| Match your headphones to the output |
Check your headphones’ plug size, impedance and sensitivity. Compare stated output power only at the same load and under the same test conditions. |
I want to connect and drive my wired headphones properly. For around 22% of consumers, the headphone and output combination is the main concern. |
| Limited space and a simple connection |
Measure the available space, including room for cables, and check whether the device needs USB power or a separate adapter. According to FiiO, the K11 measures 147 × 133 × 32.3 mm including its feet and uses DC 12 V/2 A. |
With limited space, I want to know in advance whether the device and cables will fit, and what power supply is needed. Space and connection requirements are the top concern for around 21% of consumers. |
| Switch between headphones and speakers |
Check whether there’s a line output and how switching and volume control work. The Scarlett Solo 4th Gen has separate level controls, but according to Focusrite, the line outputs and headphone output receive the same playback channels. |
If I also use active speakers, I want to know how the outputs and volume controls work together. For around 21% of consumers, switching between headphones and speakers is the main concern. |
Joybuy products
Related products coming soon.
Frequently asked questions
Should I look for a particularly high sample rate in a DAC for comparing recordings?
Not as your first selection criterion. Start by looking at the headphone output, controls and connections. To manage differences in playback loudness, measuring or normalising the source files is relevant. The European Broadcasting Union (EBU) outlines programme loudness for broadcast content; its recommendation isn’t a mandatory target for a home test.
Why can I hear a microphone input while comparing files?
With direct monitoring enabled on a Focusrite Scarlett Solo, the input signal can be sent straight to the outputs. Focusrite advises switching Direct Monitor off if you don’t want this, on third- and fourth-generation Scarlett Solo models.
How can I avoid listening too loudly for too long?
Start at a low volume and limit both the sound level and listening time. The World Health Organization (WHO) gives the example of a maximum of 40 hours per week at an average of 80 dB, compared with four hours at 90 dB. The position of a DAC’s volume knob doesn’t, by itself, measure the sound level at your ear.
What are my rights when buying a DAC online in the Netherlands?
For eligible distance purchases, you’ll generally have a 14-day cooling-off period. You’re also entitled to a product that works as it should. According to the Dutch government, you can contact the seller if there’s a fault, even if a separate manufacturer’s warranty applies. Check the terms of the specific purchase.
What safety information is relevant for an electrical DAC?
Check the product information and the applicable conformity documentation for the specific device. Ondernemersplein, the Dutch government’s business information service, explains that businesses placing electrical or electronic devices on the market must ensure that products comply with European rules. This general requirement doesn’t automatically confirm that an individual unit is compliant.