Who is this for?

Comparing recordings

You switch between existing recordings and want to judge the differences without variations in playback volume affecting your assessment. The ITU describes methods for measuring programme loudness.

Listener with different headphones

You use headphones with different plugs or sensitivities at the same desk and want suitable connections and adjustable gain. FiiO and iFi audio describe the gain and output options on their desktop DACs.

Shared-desk user

You want a setup that connects to your computer and whose volume can be easily reset when someone else uses the desk or changes the headphones. The WHO highlights the importance of volume and listening time.

What should you look for?

Compact USB DAC

Choose this option: you mainly listen to existing recordings, have limited desk space and the output is compatible with your headphones.

Trade-off: a compact model won’t necessarily have an easily accessible volume control, multiple outputs or recording inputs.

Desktop DAC with headphone amplifier

Choose this option: you have a dedicated listening space and want a volume control, multiple headphone connections or a line output.

Trade-off: allow room for the unit and any power supply. Keep the gain and sound settings consistent when comparing recordings.

USB audio interface

Choose this option: you want to record a microphone, instrument or line-level source as well as listen.

Trade-off: recording inputs aren’t a proven necessity if you only play existing recordings.

Start by checking the connections on your headphones and computer. Then decide whether you only want to listen or also record, and make sure your playback settings and volume level are consistent before comparing recordings.

What to consider What should you check? Who should pay more attention to this?
Consistent playback level Use the same headphones and playback settings, and match the volume level before switching between recordings. The ITU describes how to measure programme loudness; this isn’t a DAC feature that automatically carries out your comparison. When comparing recordings side by side, you’ll want to avoid letting differences in loudness colour your judgement. Around 36% of consumers say a consistent playback level is their top buying priority.
Connection and amplification Check your headphones’ plug and wiring, and make sure the output and gain setting are suitable. FiiO lists three gain levels and 6.35mm and 4.4mm outputs for the K11; according to its manual, the iFi ZEN DAC 3 has switchable PowerMatch gain and both output types. If you use different headphones, you’ll want the connection and amplification to suit each pair. Around 29% of consumers put this compatibility first.
Shared desk Check the USB connection, space for cables and power supply, and whether the volume control is easy to reach when someone else uses the desk. FiiO lists a separate 12V power supply for the K11. At a shared desk, a tidy setup that’s easy to reset matters. Around 21% of consumers give the workspace and controls their highest priority.
Recording audio yourself Decide whether you’ll only play files or also connect a microphone, instrument or external line-level source. The Focusrite manual describes the inputs and headphone output on the Scarlett 2i2 4th Gen. If you want to record your own audio as well as listen, suitable inputs are important. Around 14% of consumers make recording their top buying priority.

Common pitfalls

  • Assuming the loudest recording is the best one

    Differences in playback level can affect how you compare recordings; a DAC won’t automatically match their loudness.

    Keep your playback settings consistent and match the volume level before drawing conclusions. The ITU describes methods for measuring programme loudness.

  • Choosing an output just because it’s called ‘balanced’

    A plug that fits doesn’t, by itself, prove that your headphones are wired for balanced use. The 4.4mm and 6.35mm outputs on desktop devices use different connections.

    Check your headphones’ plug and wiring before deciding which output you need.

    Depending on the connection, you may need a suitable cable or adapter.

  • Using a different gain or sound setting

    A different gain level or sound processing can change the listening conditions. Switching gain can also make the volume unexpectedly louder.

    Make a note of your chosen settings, start at a low volume after switching, and keep any sound processing consistent throughout each comparison. In the ZEN DAC 3 manual, iFi advises starting at a low volume after changing the gain.

  • Choosing an interface just because you’re comparing recordings

    Playing existing recordings and making new ones don’t automatically require the same connections.

    Decide whether you’ll only play files or also record a microphone, instrument or external source. Choose recording inputs only if you need them.

Brands to compare

FiiO

The K11 is a desktop DAC for a dedicated listening space, with a USB input, volume control, and headphone and line outputs.

  • FiiO lists three gain levels, 6.35mm and 4.4mm headphone outputs, and an RCA line output.
  • The K11 uses a separate 12V power supply. The specified output power figures apply to particular test loads and aren’t the result of an independent listening test.

iFi audio

The ZEN DAC 3 combines USB-C with headphone outputs and connections for other audio equipment.

  • The manual describes 6.35mm and 4.4mm outputs, switchable PowerMatch gain, and fixed or variable line outputs.
  • For recording comparisons, decide whether XBass+ is on or off and use the same setting throughout. The manual advises starting at a low volume after changing the gain.

RME

The ADI-2 DAC FS is a desktop option for anyone looking for different playback settings and separately specified headphone and IEM outputs.

  • RME lists a remote control, DSP, EQ, loudness and an IEM output.
  • When comparing recordings, apply processing such as EQ and loudness consistently, or switch it off. Sound-quality descriptions on the product page are claims made by RME, not an independent comparison with other models.

AudioQuest

The DragonFly Cobalt is a compact USB DAC with a preamplifier and headphone amplifier for a simple playback setup.

  • AudioQuest describes it as combining a DAC, preamplifier and headphone amplifier.
  • Claims of cleaner or more natural sound are made by the manufacturer; the product information doesn’t substantiate an advantage in a level-matched blind comparison.

Focusrite

The Scarlett 2i2 4th Gen is a USB audio interface for a shared workspace where you want to record audio sources as well as listen.

  • The manual describes a headphone output and connections for a microphone, instrument and line-level source.
  • Recording inputs aren’t a proven advantage if you only listen. Check that your computer and the software you need are compatible with the documentation.

Joybuy product selection

This Joybuy selection is a wired USB-C headset with a built-in DAC for listening to recordings from a compatible device; it isn’t a standalone desktop DAC.

Samsung EO-IC100 wired in-ear headset, USB Type-C, black

Samsung EO-IC100 wired in-ear headset for calls and music, USB Type-C, black

Suitable for a listening setup where you want to use a wired USB-C headset with a built-in DAC.

Check that your computer or other playback device has a compatible USB-C connection.

Joybuy

Frequently asked questions

Does a DAC automatically make two recordings fair to compare?

No. Use the same headphones and playback settings, and compare the recordings at the same playback level. ITU-R BS.1770-5 describes how to measure programme loudness and true peak; simply having a DAC won’t carry out this comparison automatically.

How can I stop the next user being startled by a high volume?

Start at a low volume after changing headphones or gain level. iFi specifically warns about this for the ZEN DAC 3; the WHO also recommends keeping an eye on volume and listening time. This isn’t a guaranteed safe setting for every DAC and headphone combination.

Do I need an audio interface to compare existing recordings?

No, recording inputs alone aren’t a reason to get one. Choose an interface if you also want to record a microphone, instrument or line-level source, and check that its connections and computer software are suitable.

What rights do I have when shopping online in the Netherlands?

For consumer purchases made online, there’s generally a statutory 14-day cooling-off period after delivery, with some exceptions. ACM ConsuWijzer also explains that the statutory guarantee applies when a product doesn’t do what you’re entitled to expect under normal use; there’s no single fixed guarantee period that applies in every case.

Does a CE logo alone prove that a DAC for sale is safe?

No. The European Commission says that a CE marking alone doesn’t provide a complete safety guarantee. Check the product identity and safety information for the specific item; the product rules that apply depend on the device.