Who is this for?

Listeners with few spare plug sockets

You’re comparing existing files through wired headphones and don’t want to use an extra mains adapter. Check that the USB source and headphone plug are compatible.

Listeners who want to compare recordings carefully

You want to assess the differences between recordings without variations in volume or playback settings affecting your comparison. Audacity explains loudness normalisation, which brings files to a broadly similar level.

Listeners who also want to record

As well as listening back, you want to connect a microphone or instrument. Check which inputs you need and how much power the interface draws over USB.

What should you look for?

Compact USB DAC with a single output

Best suited to: playing existing recordings through one pair of wired headphones, when you don’t need recording inputs.

Check: the USB connection, the headphone plug and whether the output is suitable for your headphones.

USB DAC with multiple headphone outputs

Best suited to: using headphones with different connections; FiiO lists 3.5mm and 4.4mm outputs for the KA13.

Check: power output figures apply only to the specified output, load and mode. According to FiiO, the KA13’s 550 mW is for the balanced output in desktop mode.

USB audio interface

Best suited to: connecting a microphone or instrument as well as playing audio.

Check: the USB power supply and headphone plug; recording inputs aren’t needed just to play existing files.

Desktop DAC with a separate power supply

Best suited to: when you need the connections or controls of a desktop model and have a plug socket available.

Check: according to FiiO, the K11 requires a separate 12 V/2 A DC power supply; its USB-C connection is for data.

What to consider What to look for Who is this important for?
Power supply Check whether USB provides both data and the power required for each model. A USB-C connection doesn’t automatically mean you won’t need a separate adapter. I don’t want to use an extra plug socket, and I want to know whether my USB source can power the DAC. Around 36% of consumers prioritise keeping a plug socket free.
Consistent listening conditions Use the same headphones and playback settings. Audacity explains LUFS and RMS normalisation, which brings files to a broadly similar volume. If I want to assess the differences between files, I want to avoid a louder file affecting my comparison. Around 29% of consumers prioritise comparing consistently.
Headphone connection Check the plug type, and compare power specifications only for the correct output, load and operating mode. I want to connect my existing headphones and check in advance that the plug and output are compatible. Around 21% of consumers prioritise this compatibility.
Recording inputs Decide whether you’ll also be recording a microphone or instrument, and check which type of input you’ll need. Focusrite specifies a USB power requirement of 900 mA for the Scarlett Solo 4th Gen. I want to record audio as well as listen back, using the right input. Around 14% of consumers say recording capability is their top priority.

Common buying mistakes

  • Assuming USB-C means you won’t need an adapter

    The FiiO K11 uses USB-C for data, but according to FiiO it requires a separate 12 V/2 A DC power supply.

    Check the power specifications for the exact model before you choose.

    A separate power supply needs an extra connection and takes up a plug socket.

  • Assuming the highest power figure applies to every output

    The 550 mW listed by FiiO for the KA13 applies to the balanced output in desktop mode, not automatically to the 3.5mm output.

    Compare the output, load and operating mode with your headphones’ specifications.

  • Assuming a louder file is a better recording

    Differences in volume can affect your judgement. Audacity explains loudness normalisation, which brings audio files to a broadly similar volume.

    Keep your listening setup consistent and, if you wish, compare copies at a similar loudness level.

Brands to consider

iFi audio

The iFi GO link is a compact USB-C DAC for wired headphones with a 3.5mm plug.

  • iFi lists a 3.5mm output and 70 mW at 32 ohms for the GO link.
  • This is a manufacturer’s specification at the stated load, not an independent sound test or a guarantee of compatibility with every pair of headphones. The GO link doesn’t have the 4.4mm output found on the separate GO link Max.

FiiO

According to FiiO, the KA13 has 3.5mm and 4.4mm headphone outputs, while the K11 is a desktop model with a separate power supply.

  • FiiO lists a maximum of 550 mW for the KA13 via its balanced output in desktop mode.
  • According to FiiO, the K11 requires 12 V/2 A DC power. Don’t apply the KA13’s power figure to the K11 or its 3.5mm output.

Focusrite

The Scarlett Solo 4th Gen is a USB audio interface for anyone who wants to connect a microphone or instrument as well as listen to audio.

  • Focusrite specifies a headphone control, a 6.35mm headphone output and 900 mA USB power.
  • Check the USB power supply and make sure your headphone plug fits. You won’t need the recording features if you’re only playing existing files.

Creative

Creative presents the Sound Blaster PLAY! 4 as a portable USB DAC with features for headsets and calls.

  • Creative lists microphone mute, Bass Boost and Dynamic EQ.
  • These effects can affect playback when you’re comparing recordings. Check the settings before attributing differences to the recording itself.

AudioQuest

AudioQuest describes the DragonFly Black v1.5 as a USB DAC, preamplifier and headphone amplifier for devices including computers.

  • AudioQuest specifies an output voltage of 1.2 V.
  • Voltage alone doesn’t determine whether the DAC is suitable for a particular pair of headphones. For mobile use, AudioQuest says a suitable adapter may be needed; check your source’s USB connection too.

Products related to this topic

Related products coming soon.

Frequently asked questions

Do I need a recording interface to compare existing recordings?

No, not if you’re only playing existing files. Choose a headphone output that suits your headphones; recording inputs are only relevant if you also want to connect a microphone or instrument.

How can I make a fair comparison?

Use the same playback setup and headphones, keep the settings consistent, and make sure you’re not unknowingly comparing a louder file with a quieter one. Audacity explains LUFS and RMS normalisation, which brings files to a broadly similar volume; keep the originals if you use this method.

Can I always use a USB-C DAC without a plug socket?

No, it depends on the model. Focusrite specifies that the Scarlett Solo 4th Gen receives power and data over USB-C, with a power requirement of 900 mA. FiiO lists a separate 12 V/2 A DC power supply for the K11, alongside its USB-C data connection. Check the specifications for the exact model and what your USB source can supply.

What product regulations apply to a DAC sold in the Netherlands?

The European Commission states that electrical and electronic products must comply with RoHS restrictions on certain substances, unless specifically exempt. CE marking is required where applicable harmonised EU rules stipulate it; a general CE statement alone doesn’t prove that the headphone connection or performance will meet your needs.

What should I bear in mind during long listening sessions?

Start at a low volume, limit your exposure and take breaks. The World Health Organization points out that both sound level and listening time matter; a DAC’s power rating doesn’t tell you the sound level your headphones produce at your ears.