Who might need a USB DAC?

Lossless listener using a desktop computer

Wants to find out whether their existing wired output and playback app settings are sufficient. Apple Support explains how to set up lossless playback in Apple Music.

Listener with wired headphones

Needs a suitable USB-to-headphone connection and should check that their computer port and headphone plug match the connections on the model they choose.

Listener with a two-monitor desktop setup

May value easy-to-reach volume controls and extra audio connections, and could consider a desktop model if there’s enough space and power for it.

What should you look for when choosing one?

Existing wired audio output

Choose this if: your computer’s output can drive your headphones adequately and your playback app supports the lossless setting you want.

Bear in mind: available outputs and supported settings vary by computer and playback app.

Compact USB DAC dongle

Choose this if: you want to connect wired headphones to a suitable USB port without taking up much desk space.

Bear in mind: check that the output matches your headphone cable’s plug and that your computer has the right USB connection.

USB desktop model

Choose this if: you want a physical volume knob or extra audio connections at a fixed listening position.

Bear in mind: a desktop model takes up space and may need a separate power supply; according to FiiO, the K11 R2R uses a 12V/2A power supply.

What to consider What should you check? Who is this important for?
Lossless playback setup Check the source, app settings and existing wired output. For Apple Music on Windows, Apple Support lists lossless playback up to 24-bit/48 kHz and hi-res lossless up to 24-bit/192 kHz. If I mainly want to know whether my current computer can play lossless audio, I’ll check the whole chain before buying extra equipment. Around 36% of consumers give lossless playback the highest priority.
Connection Compare the available USB port, the supplied cable or adapter, and your headphone plug with the connections on the exact model. If I want to keep using my existing wired headphones, the connection needs to fit at both ends. Around 29% of consumers prioritise connections that work with their computer and headphones.
Driving your headphones Compare the stated output power only when the output, load and operating mode are the same; base your choice on the requirements of your own headphones. If I want to judge whether a DAC is suitable for my headphones, I’ll check the specifications for the connection I’ll actually use. Around 21% of consumers prioritise how well a device drives their own headphones.
Controls and desk space Check where the device can sit, whether you’ll use the extra connections, and whether there’s room for the power supply and cables. FiiO lists a separate 12V/2A power supply for the K11 R2R. If I want a physical volume knob or extra connections behind my two monitors, I’ll weigh those features against the space available on my desk. Around 14% of consumers make controls and desk layout their main consideration.

Common buying mistakes

  • Assuming the highest sample rate means better sound

    A DAC’s specifications alone don’t tell you what the playback app and the rest of the audio chain can deliver. Apple Support describes wired lossless listening without requiring an external DAC as a general rule.

    Check the source, your playback app settings and your current output before comparing DAC specifications.

  • Choosing a 4.4mm output for headphones with a 3.5mm plug

    A 4.4mm connection won’t fit a cable with a 3.5mm plug directly.

    Check the plug on the headphone cable you actually want to use.

  • Comparing power figures without checking the conditions

    FiiO lists different figures for the KA13 and K11 R2R depending on factors such as output, load and mode.

    Compare figures only under the same conditions and check the requirements of your own headphones.

  • Choosing a desktop model without checking space and power

    According to FiiO, the K11 R2R has a separate power supply, so make sure you have room on your desk for the device and its connections.

    Measure the space available behind your monitors and decide in advance whether you’ll use the extra knob and inputs.

Brands to consider

FiiO

FiiO offers examples of both a compact USB option, such as the KA13, and a desktop model, such as the K11 R2R.

  • According to FiiO, the KA13 has 3.5mm and 4.4mm outputs and a desktop mode; the K11 R2R has a physical volume knob and additional inputs.
  • The K11 R2R needs a separate power supply. Power specifications apply under the stated conditions and don’t necessarily apply to every pair of headphones.

iFi audio

The GO link Max is a compact USB DAC for anyone looking for a 3.5mm or 4.4mm headphone output.

  • iFi lists both output types and support for up to PCM 384 kHz.
  • Check that the output matches the plug on your headphone cable.

Moondrop

The Dawn Pro 2 is a USB dongle with headphone outputs for two common plug types.

  • The manufacturer lists a 3.5mm output and a 4.4mm output, along with a USB-C cable and USB-A adapter.
  • Check the connections supplied and choose the output that matches your headphones.

AudioQuest

The DragonFly Black v1.5 has a USB stick-style design and a 3.5mm headphone output.

  • AudioQuest lists native decoding up to 24-bit/96 kHz.
  • Native decoding up to that limit isn’t the same as native decoding of higher-resolution files; AudioQuest also lists the adapters needed for mobile devices.

Related products

Related products coming soon.

Frequently asked questions

Do I always need an external DAC for lossless audio in Apple Music?

No. Apple also describes wired lossless listening without requiring an external DAC as a general rule. Apple does specify an external DAC for certain Apple devices and music above 48 kHz, so check your device and playback app settings.

How do I set up lossless audio on a Windows computer?

In the Apple Music app for Windows, open Settings, select Playback and turn on Lossless Audio. You can also choose your preferred quality for streaming and downloads there. These instructions apply to Apple Music and don’t automatically apply to other music services.

How can I avoid choosing the wrong connection or buying an unnecessary adapter?

Compare your computer’s available USB port and your headphone plug with the connections on the exact model. For example, the Moondrop Dawn Pro 2 lists a USB-A adapter; check what’s included with the model you’re considering.

What can I do if a DAC bought online doesn’t fit or develops a fault?

Many online consumer purchases generally come with a 14-day cooling-off period. You’re also entitled to a product that is fit for purpose in the Netherlands; there is no fixed statutory two-year guarantee period. If a product is faulty, contact the seller.

Which product rules apply when selling a USB DAC in the Netherlands?

EU rules for electrical and electronic equipment may set requirements for electromagnetic compatibility and, where applicable product rules require it, CE marking. The obligations depend on the specific product; a CE logo alone says nothing about sound quality.