Who might need a USB DAC?

Listeners with wired headphones

You’ll want to check whether your current output is suitable and which USB and headphone connections you need if you choose a DAC.

Listeners with sensitive in-ear headphones

You listen in a quiet space and want usable volume control and an output that suits your in-ears, rather than simply looking for maximum power.

Listeners with demanding headphones

If your current output may not provide enough volume or headroom, compare the amplification specifications against your headphones’ impedance and connection.

What should you look for?

Keep your current audio output

Choose this if: your wired headphones are already connected properly and the volume and playback meet your needs.

Consider: you won’t get extra connections, a volume knob or more amplification headroom. Apple does recommend an external DAC for certain devices and tracks above 48 kHz, but this isn’t a general requirement for lossless music.

A compact USB DAC

Choose this if: you want to connect wired headphones to a source without a suitable analogue output, or you have limited desk space.

Consider: check the USB connection, any adapter you may need and the headphone plug. The manufacturer lists 3.5mm and 4.4mm outputs for the iFi GO link Max; AudioQuest recommends an adapter for the DragonFly Black v1.5 with certain mobile connections.

A desktop DAC/headphone amplifier

Choose this if: you need a physical volume knob, extra inputs or a headphone output in a fixed listening spot.

Consider: allow for the space it takes up and its power supply. The FiiO K11 uses a separate 12V power supply. Compare amplification figures only for an output and load suited to your headphones.

What to consider What to look for when buying Who is this important for?
Connection and need Check the USB port, any adapter you may need and the headphone plug; consider whether your current output already meets your needs. I want to check that my current output and headphones are suitable, and that a new DAC will physically fit. Around 33% of consumers prioritise connection and need.
Quiet playback and volume Look for details about the output you’ll use and the volume controls; start with the volume set low. When using sensitive in-ears in a quiet room, I want to listen at a low volume and look out for possible background noise. Around 25% of consumers prioritise quiet playback and finely adjustable volume.
Amplification for your headphones Compare the power or output voltage at the stated load and for the plug you’ll use. If my current output doesn’t drive my headphones adequately, I want to compare figures for the right impedance and connection. Around 25% of consumers prioritise amplification for their own headphones.
Controls and desk space Decide whether you’ll use a physical volume knob or extra inputs; also check the space, cables and power supply required. In a fixed listening spot, I want controls or extra connections without giving up more space than necessary. Around 17% of consumers prioritise controls and desk connections.

Buying pitfalls

  • Buying a DAC simply because your music is lossless

    An audio output that’s already suitable can play lossless music; adding a DAC doesn’t guarantee an audible improvement.

    First, check your source settings and wired connection, and decide what specific problem you want a new DAC to solve.

  • Comparing the highest power figure for the wrong output

    The FiiO K11’s power rating for its balanced 4.4mm output doesn’t apply to its 6.35mm output.

    Compare figures only for the plug and output you’ll use, and check the stated load.

  • Assuming a compact USB DAC will connect directly to any source

    AudioQuest lists adapters for use with the DragonFly Black v1.5 and certain mobile devices.

    Before buying, check your source’s USB port and find out which adapter or cable you’ll need.

Brands to consider

FiiO

Worth considering for a fixed listening spot, with the K11 desktop USB DAC and headphone amplifier.

  • FiiO lists a volume knob, multiple inputs and 6.35mm and 4.4mm outputs for the K11.
  • The stated 1400 mW applies to the balanced output at 32 Ω. The K11 uses a separate 12V power supply.

iFi audio

Worth considering if you’re looking for a compact USB DAC such as the GO link Max.

  • iFi audio lists a 3.5mm and a balanced 4.4mm headphone output for this model.
  • Check which output is compatible with your headphone cable.

SMSL

Worth considering for a fixed listening spot, with the compact desktop DAC and headphone amplifier C200.

  • SMSL lists USB playback, other digital inputs and a remote control.
  • A stated supported PCM format doesn’t, by itself, prove there’ll be an audible improvement.

AudioQuest

Worth considering if you’re looking for a compact USB stick DAC such as the DragonFly Black v1.5.

  • AudioQuest lists headphone use and native decoding up to 24-bit/96 kHz.
  • For certain mobile connections, the manufacturer recommends a separate adapter; check your source’s connection.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need an external DAC for lossless music?

No, not if your current audio output and wired headphones meet your needs. Apple Support recommends an external DAC for certain devices and tracks with a sample rate above 48 kHz; it isn’t a general requirement for all lossless music.

How do I switch on lossless playback in Apple Music for Windows?

In Apple Music for Windows, open Settings, then Playback, and switch on Lossless audio. You can choose your preferred quality for streaming and downloads separately.

Is the highest output power most important if I want to listen quietly?

Not necessarily. Compare power only for the stated output and load, and consider volume control and output noise if you have sensitive headphones. Start with the volume set low. According to the World Health Organization, the risk to your hearing is linked to both sound level and listening time.

What are my rights when buying a USB DAC online in the Netherlands?

For a typical online purchase from a trader, ACM ConsuWijzer says you’ll generally have a statutory cooling-off period of up to 14 days after delivery, with some exceptions. You’re also covered by the legal guarantee if the product doesn’t perform as you could reasonably expect under normal use; the retailer is your point of contact.