Who is a USB DAC suitable for?

Listeners with limited desk space

If you want to use wired headphones with your laptop and possibly your phone too, a compact DAC with the right connection could be a practical choice. FIIO Netherlands lists Type-C and Lightning versions of the KA11, both with a 3.5mm output.

Listeners with a dedicated desk setup

If your headphones stay in one place and you want to control the volume on the device itself, compare the outputs and power options of desk-based DACs. FiiO specifies a volume control and 6.35mm and 4.4mm outputs for the K11; the iFi manual lists these outputs for the ZEN DAC 3 too.

Listeners who want to set up lossless playback

First, check that your music service, track and playback settings actually provide lossless audio. Apple Support Netherlands describes specific cases where an external DAC is needed for tracks above 48 kHz; this is not a general requirement for all lossless playback.

What should you consider when choosing one?

First, check whether your existing wired output and settings meet your listening needs. Then choose the connections, controls and power options you actually need.

What to consider What should you check? Who is this important for?
Connections and size Check the DAC’s USB type and whether your headphone plug will fit, for example 3.5mm, 6.35mm or 4.4mm. If I want to use my wired headphones with a laptop and possibly a phone too, I’m looking for a small DAC with suitable connections. Around 33% of consumers put compatibility and compact size first.
Controls and power Compare the volume controls, space required and power options for the exact model. At a fixed listening spot, I want to adjust the volume on the DAC and plug my headphones straight into it. Around 27% of consumers prioritise controls and suitable outputs for a desk setup.
Lossless playback setup Check that your service offers lossless audio, the setting is switched on and your device supports the output you want. If I listen in lossless, I want to make sure first that the source and settings actually deliver that quality. Around 20% of consumers put genuine lossless playback first.
Making use of your existing connection Test your current wired output and settings before choosing extra connections or controls. If my current connection works well, I don’t want to buy extra hardware or accessories I don’t need. Around 20% of consumers prioritise avoiding unnecessary purchases.

Common buying mistakes

  • Assuming a high maximum sample rate means better sound

    A DAC’s specifications won’t tell you whether your music service, track and settings provide a lossless signal. Apple recommends an external DAC only in specific device scenarios for tracks above 48 kHz.

    Check your source and playback settings first. Then choose based on the connections and controls you need.

  • Treating a desk-based DAC like a USB dongle

    The FiiO K11 specifies a 12 V/2 A DC power supply. The iFi manual says the ZEN DAC 3 can be powered via USB and describes a separate DC power supply as an option; according to the manual, it isn’t included.

    Check the power requirements for the exact model and make sure the device, cables and any power supply will fit on your desk.

  • Assuming every headphone output also supports a microphone

    A headphone output doesn’t automatically mean that the microphone on a wired headset will work. Creative specifies microphone recording and a four-pole CTIA connection for the Sound Blaster PLAY! 4.

    If you also want to make calls, check microphone support, the plug standard and compatibility with your operating system.

  • Turning up the gain to drown out noise in your room

    The iFi manual recommends turning the volume down before changing the gain setting. The World Health Organization points out that sound level and listening duration both affect the risk of hearing damage.

    Start at a low volume and avoid continually turning it up to drown out background noise. VeiligheidNL recommends well-fitting headphones as a way to reduce the need to drown out external sounds.

Relevant brands

FiiO

The KA11 we looked at is a compact USB headphone DAC; the K11 is a desk-based DAC with different connections and power requirements.

  • FIIO Netherlands lists Type-C and Lightning versions of the KA11, both with a 3.5mm output.
  • FiiO specifies a volume control, 6.35mm and 4.4mm outputs, and a DC 12 V/2 A power supply for the K11.
  • The K11’s connections and power requirements don’t automatically apply to the KA11.

iFi audio

The ZEN DAC 3 we looked at is designed for a dedicated listening setup, with headphone and line outputs.

  • The iFi manual lists 6.35mm and 4.4mm headphone outputs and USB power.
  • According to the manual, a separate DC power supply is optional and is not included.
  • The manufacturer’s claims about sound quality are not an independent listening test.

Creative

The Sound Blaster PLAY! 4 we looked at is a compact USB audio adapter for use with a compatible wired headset.

  • For model SB1860, Creative specifies a four-pole CTIA connection, microphone recording and USB bus power.
  • Supported systems and requirements vary by platform; these specifications don’t automatically apply to other Sound Blaster models.

AudioQuest

The DragonFly Black v1.5 we looked at is a portable USB DAC and headphone amplifier for wired listening setups.

  • AudioQuest describes connecting it to laptops, tablets and smartphones.
  • The manufacturer’s claims about its sound don’t prove that this model will sound better with your headphones.

USB DAC products on Joybuy

Related products will be available soon.

Frequently asked questions

Do I always need an external DAC for lossless music?

No, not as a general rule. Apple Support Netherlands mentions an external DAC for tracks above 48 kHz in specific device scenarios. Check what your device supports and the settings in your music service.

How do I set up Apple Music for lossless listening?

Switch on Lossless Audio in the Apple Music app or your device settings, then choose the quality you want for streaming or downloads. According to Apple, tracks you’ve already downloaded need to be downloaded again to get the lossless version; lossless audio uses more data and storage space.

Will my wired headset’s microphone work with any USB DAC?

Don’t assume it will: check that the DAC supports microphone recording and that the plug standard matches. Creative specifies this feature and a four-pole CTIA connection for the Sound Blaster PLAY! 4.

What should I check when using a desk-based DAC for the first time?

Connect the right output and power supply, then start at a low volume. The iFi manual recommends turning the volume down before changing the gain setting. Also bear sound levels and listening duration in mind.

What are my rights when buying a DAC online in the Netherlands?

According to ACM ConsuWijzer, online product purchases generally come with a cooling-off period of up to 14 days after delivery, subject to legal exceptions. You’re also covered by the statutory guarantee if the product doesn’t meet what you could reasonably expect under normal use; there isn’t a standard fixed two-year period.