Who is a USB DAC for hi-res audio suited to?

Listener with a permanent desk setup

Wants to listen to local hi-res files through wired headphones and may need easy-to-reach volume controls or extra outputs. FiiO and iFi audio describe models with different headphone and line outputs.

Listener looking to drive their headphones

Wants to check before buying that the stated amplifier power is suitable for the headphone output and load they’ll be using. FiiO lists different figures for its models depending on the output and operating mode.

Home worker with a single audio setup

Wants to listen to music and make calls using the same computer. A dedicated microphone or headset input can be an important factor when choosing; Creative lists these inputs for the Sound Blaster X4.

What should you look for when choosing?

Start with the connection and playback route from your computer, then compare the outputs, controls and features you need at your desk.

What to consider What should you check? Who should weigh this up more carefully?
Connections and controls Check the USB connection, headphone plug, any line output and power supply for the exact model. If I use my DAC in a fixed spot, I want the controls and outputs to suit my desk. Around 36% of consumers prioritise these fixed connections and controls.
Power for your headphones Compare the stated power for the relevant output, headphone load and mode; start at a low volume. I want to know whether my headphones are suitable for the output I’ll actually be using. Around 29% of consumers give driving their own headphones top priority.
Size and playback route Check for PCM or DSD support, and set the DAC as the output device on your computer and in your playback software. If space is limited or I want to move my DAC between workspaces, a compact setup matters alongside support for my files. Around 21% of consumers prioritise compactness.
Music and calls Check for a dedicated microphone or headset input and look at the resolution supported in the playback mode you want to use. If I use the same setup for music and wired calls, I want the device to have suitable inputs. Around 14% of consumers prioritise this combination.

USB DAC buying pitfalls

  • Comparing maximum mW figures without context

    Power ratings can vary depending on the output, load and mode. FiiO lists these conditions alongside the figures for the K11 and KA13.

    Only compare figures when the output and stated load match, and check that your headphone plug fits.

    If your headphone cable doesn’t fit the chosen output, you may need a different cable.

  • Assuming the highest PCM specification guarantees better sound

    A format maximum tells you which input is supported, but doesn’t on its own tell you whether your computer and playback software will play the file through that setup. FiiO also explains the settings to use on your computer and player.

    Check your files and player, and set the DAC as the output device before comparing maximum sample-rate specifications.

  • Assuming a headphone DAC is a microphone interface

    A headphone or line output doesn’t mean a device also has a microphone input. Creative explicitly lists microphone and headset inputs for the Sound Blaster X4.

    If you also want to use the device for calls, check that it has an input for your wired microphone or headset.

    If your chosen DAC doesn’t have the microphone input you need, you may need a separate interface or a different headset connection for calls.

  • Forgetting the power supply for a desktop DAC

    The FiiO K11 uses USB-C for data and also needs a separate 12V/2A power supply.

    Before buying, check what’s included with the product and whether you have room for the power connection on or near your desk.

    A separate power connection takes up space at your desk, in addition to the USB data cable.

Brands to consider

FiiO

The KA13 is a compact dongle DAC; the K11 is a desktop model with a separate power supply. They’re different models, not interchangeable versions.

  • FiiO lists 3.5mm and 4.4mm outputs and a desktop mode for the KA13. According to FiiO, the K11 has 6.35mm and 4.4mm headphone outputs, as well as an RCA line output.
  • Stated power depends on the output, load and mode. The K11 also needs a 12V/2A power supply.

iFi audio

The ZEN DAC 3 is a desktop option for anyone looking to use headphones and line outputs.

  • The manual lists 6.35mm and 4.4mm headphone outputs, plus RCA and 4.4mm line outputs with fixed or variable level control.
  • The manual describes maximum supported formats and a stated maximum power output; these specifications aren’t an independent listening test. The manual advises starting at a low volume when changing the gain.

Creative

The Sound Blaster X4 is worth considering if you also want to use a USB audio device with a wired headset or microphone.

  • Creative lists a microphone input, a headset input and a control for muting the microphone.
  • Creative lists an output impedance of 10 Ω and different maximum PCM resolutions for stereo and surround sound. Check the mode and how it pairs with your headphones.

Joybuy products

Related products will be available soon.

Frequently asked questions

Is support for 384 kHz or 768 kHz enough to play my hi-res file at that rate?

No, not on its own. Check your file format and set both your computer and playback software to use the DAC. FiiO lists USB PCM up to 32-bit/384 kHz for the K11; the iFi audio ZEN DAC 3 manual specifies PCM up to 768 kHz. FiiO also describes a more limited DSD playback route for the K11 on macOS.

What should I set up after connecting it, and how should I start listening?

Select the DAC as the output device on your computer and in your playback software. For the K11, also follow FiiO’s instructions for the USB input and output mode. Start at a low volume, especially before switching to a higher gain setting; the World Health Organization notes that both sound level and listening time affect the risk to your hearing.

In the Netherlands, am I automatically entitled to just a two-year legal guarantee on a DAC?

No. According to the Government of the Netherlands, there is no fixed statutory guarantee period; what you can expect from a product that meets the required standards depends, among other things, on its expected lifespan. If there’s a fault, contact the seller. A manufacturer’s guarantee doesn’t replace your statutory rights.

Which European markings and Dutch disposal rules are relevant?

According to the European Commission, CE marking is required when a product falls under applicable harmonised EU rules that require it. The EU’s guidance on WEEE also describes the crossed-out wheelie bin symbol for electrical and electronic equipment, with some exceptions. When buying a similar new device, private consumers can return their old one to the seller under the Dutch old-for-new scheme, including when buying online. These general rules don’t confirm that a specific item complies with the requirements.