Who is this buying guide for?

Listeners comparing subtle differences between recordings

If you want to switch between recordings using the same headphones and fixed settings, pay attention to noise and unintended EQ. FiiO, iFi audio and RME describe the output or settings available on their respective models; keep your chosen settings the same while comparing.

Users with headphones that are harder to drive

The right output and available adjustment range depend on your headphones. FiiO and iFi audio’s specifications show why you should consider the output, load and gain together, rather than looking only at the maximum power figure.

Listeners short on desk space

If you move between workspaces, you may value a simple USB connection and a compact device more than extra connections or controls. Qudelix describes USB audio for the 5K; also check that the available output is suitable for your headphones.

What should you look for when buying?

First, check that the DAC works with your audio source and headphones. Then decide which controls, outputs and amount of space you need at your workstation.

What to consider What should you check? Who should consider this?
Noise and consistent settings Check the noise figures for the relevant output and measurement conditions. Use the same headphones, output, gain and EQ setting for both recordings, and keep the volume as consistent as possible. If I want to assess subtle differences between recordings, I don’t want noise or changing settings to affect the comparison. Around 33% of consumers prioritise low noise and consistent settings.
Driving your headphones Compare your headphones’ impedance, sensitivity and plug with the specifications for the exact DAC output you intend to use. Start at a low volume. If you mainly want to know whether your headphones can be driven suitably and with enough control, check the connection and adjustment range first. Around 27% of consumers prioritise this.
Connections and controls Check the USB connection on your audio source, the headphone plug, and whether you need a line output or a separate power supply. If I connect the DAC at a fixed workstation, I want the plugs and controls to suit my setup. Around 20% of consumers prioritise connections and physical controls.
Compact design or desktop features Check that your audio source supports USB audio and that your headphones connect directly to the available output. If you move your DAC between study spaces, you may value a small device more than extra connections or controls. Around 20% of consumers prioritise a compact design.

Common buying mistakes

  • Comparing only the highest mW figure

    A DAC’s stated power can vary depending on the load and output. FiiO lists figures for the K11 under specific measurement conditions; on their own, they don’t tell you how it will work with your headphones.

    Compare the figures for the relevant output and load, and check your headphones’ sensitivity and connection too.

  • Assuming every desktop DAC only needs USB power

    According to FiiO, the K11 requires a 12 V/2 A DC power supply. The iFi ZEN DAC 3 manual describes USB power and states that a separate DC power supply is not included.

    Check the power requirements and what’s included with the exact model.

    A separate power supply may need a socket and take up extra desk space.

  • Letting EQ or gain settings vary without noticing

    XBass+ or PowerMatch on the iFi ZEN DAC 3, and DSP on the RME ADI-2 DAC FS, can change the sound settings. Different settings make it harder to compare the recordings alone.

    Make a note of the settings and use the same output, gain and processing for both recordings, keeping the volume as consistent as possible.

  • Seeing a balanced connection as a universal sound upgrade

    The models discussed have different output types, including 2,5 mm, 3,5 mm, 4,4 mm and 6,35 mm. An output type alone doesn’t prove that you’ll hear an improvement with your headphones.

    Check which connection fits directly and is supported by the manufacturer; don’t buy a cable just because it’s labelled ‘balanced’.

    A different plug may mean you need a suitable cable or adapter.

Brands to consider

FiiO

The K11 is a desktop option for anyone looking for a volume knob, multiple headphone outputs and an RCA line output.

  • FiiO specifies separate power and noise figures for each output; these apply under the stated measurement conditions.
  • The K11 requires a 12 V/2 A DC power supply. The stated figures don’t, on their own, show that you’ll hear an improvement.

iFi audio

The ZEN DAC 3 is a desktop option with USB-C power, analogue volume control and a line output.

  • The manual describes 6,35mm and 4,4mm outputs, PowerMatch and XBass+.
  • The switchable features need careful attention when comparing recordings: keep the settings the same. The separate DC power supply is not included.

RME

The ADI-2 DAC FS is a desktop option for anyone looking for a separate IEM output and a wide range of settings.

  • RME lists separate headphone and IEM outputs, as well as DSP.
  • Different DSP settings can affect a recording comparison, so make sure they match.

Qudelix

The 5K is a compact option for listening over USB and using in more than one workspace.

  • Qudelix specifies 3,5mm and 2,5mm outputs, as well as USB audio.
  • According to Qudelix, the 5K can be connected to multiple sources, but plays audio from one source at a time. Check the active input and EQ setting.

Joybuy products

Related products coming soon.

Frequently asked questions

Will a USB DAC automatically make differences between two recordings easier to hear?

No. First, choose a suitable output and keep your headphones, volume, gain and any EQ the same. Model specifications alone don’t show that you’ll hear a difference with your particular setup.

How do I connect a DAC to compare recordings?

Connect the supported USB input to your audio source, select the DAC as the audio output and start at a low volume. According to FiiO, the K11 also requires a 12 V/2 A power supply; the iFi ZEN DAC 3 manual describes USB power.

Should I switch on EQ or other sound processing?

Not if you want to compare recordings without different playback processing: keep the settings the same or switch processing off. The iFi ZEN DAC 3 offers XBass+, while the RME ADI-2 DAC FS has DSP; these settings can change the sound.

What product rules apply to a USB DAC in the Netherlands?

A product offered for sale must comply with the applicable EU product rules. CE marking is required where applicable harmonised EU rules specify it; the CE mark is not an independent quality approval.

What rights do I have when I buy a DAC online?

According to ACM ConsuWijzer, online purchases generally come with a 14-day cooling-off period from delivery, subject to legal exceptions. This is separate from your statutory rights if a product doesn’t do what you could reasonably expect it to.