Start by checking the USB connection on your music source and the plug on your headphones. A compact USB DAC takes up very little extra space. A desktop model is most useful if you’ll use its volume control or additional outputs, and your USB source can provide enough power. A DAC doesn’t play files by itself, so also check that your device and software can open your locally stored music.
Who is a USB DAC suitable for?
Listener with few spare sockets
You play your own music from a laptop or another USB audio device and don’t want an extra mains adaptor. Check that your USB source can power the DAC you’ve chosen. Topping’s manual says the DX1 II needs an additional power source if the connected source doesn’t supply enough power.
Listener with wired headphones
You want the USB connection and headphone plug to be compatible, and the output to suit your headphones. Creative lists USB-C and a 3.5mm CTIA output among the Sound Blaster PLAY! 4’s features. Check the connections and compatibility for your own setup.
Listener with a dedicated listening spot
You listen at a desk and would genuinely benefit from a volume knob or extra outputs. iFi audio describes the ZEN DAC 3 as a USB-powered model with volume control and multiple outputs. Check whether USB power is sufficient for your setup.
What should you look for when buying?
Compact USB DAC
Best for: listening from one compatible device with wired headphones, without needing controls or extra outputs on your desk.
Keep in mind: the DAC uses a USB port and draws power from the source. Check the connections and power requirements.
USB-powered desktop model
Best for: a dedicated listening spot where you’ll make real use of the volume control or extra connections.
Keep in mind: it takes up more desk space. If USB power isn’t sufficient, you may need an additional power source, as Topping’s manual explains for the DX1 II.
Existing headphone output
Best for: a device that already has a suitable output and works with your headphones.
Keep in mind: you won’t be adding a separate DAC, controls or connections.
| What to consider |
What should you check? |
Who is this most important for? |
| Power without an extra mains socket |
Check the exact model’s power requirements and whether your USB source supplies enough power. Topping’s manual recommends an external power source if the source doesn’t supply enough power for the DX1 II. |
If you don’t want to use a socket for a second adaptor, you’ll want to know whether your music source can power the DAC. Around 36% of consumers prioritise power without an extra mains socket. |
| Compatible connections |
Check the USB port, supported source and headphone plug. Creative lists USB-C and a 3.5mm four-pole CTIA output for the PLAY! 4. |
If you use wired headphones, you’ll want to make sure both your USB source and headphone plug connect to the DAC. Around 29% of consumers prioritise compatible connections. |
| Headphone output |
Compare the plug type and the stated impedance or power specifications for the same output. Creative lists a supported headphone impedance of 16 to 150 ohms for the PLAY! 4. |
If you want to keep using your existing headphones, check the output and its relevant specifications. Around 21% of consumers prioritise the connection and output for their own headphones. |
| Controls and local files |
Check which software plays your files, then select the DAC as the audio output. After that, decide whether you need the extra controls and outputs of a desktop model. |
If you listen from a dedicated spot, you’ll only want extra controls or outputs if they suit your setup. Around 14% of consumers prioritise controls and the layout of their playback system. |
Common buying mistakes
-
Assuming every USB DAC works without an extra power supply
USB audio doesn’t automatically mean that every source supplies enough power. Topping’s manual says the DX1 II needs an additional power source if the USB source doesn’t supply enough power.
Check the power instructions for the exact model and the device you want to connect it to.
If your source doesn’t supply enough power over USB, you may need an extra cable and an external power supply.
-
Choosing a DAC based only on a high-resolution audio specification
A stated playback resolution doesn’t confirm that the USB connection, headphone plug and controls will suit your setup.
Check the connections, power requirements and compatibility first. Then consider the resolution specifications alongside your source and files.
-
Confusing an extended warranty with your statutory rights
An extended warranty is not the same as your statutory rights with the seller. ACM ConsuWijzer explains that your statutory rights apply in addition to any extra warranty, and depend on what you could reasonably expect from the product.
First, find out what statutory rights apply, then compare exactly what an extended warranty adds.
Brands to compare
Creative
The Sound Blaster PLAY! 4 is a compact, USB-powered DAC. The specifications below apply to model SB1860.
- Creative lists USB-C, USB bus power and a 3.5mm CTIA output for the PLAY! 4.
- Check the stated system requirements and whether the output suits your headphones. These model specifications don’t confirm compatibility with every setup.
iFi audio
The ZEN DAC 3 is a desktop model, while the GO link is a more compact option for wired headphones.
- According to iFi audio, the ZEN DAC 3 can be powered via USB and has multiple outputs and volume control. iFi audio lists a 3.5mm output for the GO link.
- The separate 5V input on the ZEN DAC 3 is an optional power connection. Check which power supply and connections suit your source and setup.
Topping
The DX1 II is a desktop model that can use a single USB port for audio and power when the source supplies enough power.
- Topping’s manual explains that audio and power can be supplied through the same USB port when the source provides enough power.
- If the source, such as a phone, doesn’t provide enough power, the manual says you may need a Y-cable with an external power source. Check this before buying if you want to keep a mains socket free.
AudioQuest
AudioQuest describes the DragonFly Black v1.5 as a portable USB DAC and headphone amplifier that connects to a source.
- AudioQuest lists laptops, tablets and smartphones as possible sources.
- Check whether it works with or without a suitable adaptor, and whether the output suits your headphones.
FiiO
The KA11 is a compact DAC headphone amplifier for anyone looking for a small alternative to a desktop model.
- FiiO describes the KA11 as compact.
- Check the exact USB variant, headphone output and power requirements for your setup.
Related products on Joybuy
Related products coming soon.
Frequently asked questions
Do I need the internet to play my own music files with a USB DAC?
No, not to convert audio that a connected device is already playing. However, check that your device and software can open local files; the USB DAC discussed here isn’t a standalone music player.
What should I check if I can’t hear anything through my USB DAC?
Check the selected audio output on your playback device, the volume and the headphone plug. If you’re using a Topping DX1 II with a source that may supply little power over USB, also check the power instructions in the manual.
How can I check whether a USB DAC is suitable for my headphones?
Compare your source’s USB connection with the DAC’s input, then check the type of headphone output and its relevant specifications. For example, Creative lists a 3.5mm four-pole CTIA output and a supported impedance of 16 to 150 ohms for the PLAY! 4. These details apply to that model.
Should I buy an extended warranty for a USB DAC?
No, you don’t need an extended warranty to have statutory rights. According to ACM ConsuWijzer, these rights apply in addition to any seller’s or manufacturer’s warranty. What you can reasonably expect from a product is taken into account when assessing your rights.
Does a CE mark prove that a USB DAC sounds good?
No. According to the European Commission, the manufacturer uses the CE mark to indicate that a product complies with applicable EU product rules when the mark is required for that product. The mark doesn’t tell you whether the DAC sounds good or suits your headphones.