Listeners with a connection issue
You want to connect wired headphones to your desktop. First, check that the USB connection and headphone plug on the version you choose are compatible.
If your existing headphone output works well and you don't have a specific connection or control issue, you may not need an additional USB DAC. If you're having sound problems, first check that the correct output is selected and the sound isn't muted, as Microsoft Support advises. Only then choose between a compact adapter and a desktop unit, based on your connections, volume controls and available cable space.
You want to connect wired headphones to your desktop. First, check that the USB connection and headphone plug on the version you choose are compatible.
You want to be able to reach the volume control when your desk is raised or lowered. A device on the desktop sits in a different position from an adapter plugged into a USB port.
You may also want to connect active speakers or use your headset microphone. Check that the specific model has the line output or microphone connection you need.
Choose this if: your headphones already fit and you don't have a specific connection or control issue. If there's no sound, first check the selected system output and make sure the sound isn't muted; Microsoft Support recommends both steps.
Bear in mind: you won't be adding another device, but you won't gain any new physical controls or extra outputs either.
Choose this if: you mainly want to connect headphones via USB and keep your setup compact. FIIO Netherlands lists a 3.5mm output for the KA11, with separate Type-C and Lightning versions. Creative specifies a CTIA headset connection and microphone recording for the PLAY! 4.
Bear in mind: check that you have the right USB version and plug. An adapter connected to your computer won't necessarily give you an easy-to-reach volume control at a height-adjustable desk.
Choose this if: you want a volume control on your desk, have compatible headphones with a 6.35mm or 4.4mm plug, or want to connect active speakers via a line output. The FiiO K11 and iFi ZEN DAC 3 have headphone outputs and RCA line outputs.
Bear in mind: allow space for the device and its plugs. FiiO specifies a separate 12V/2A power supply for the K11; the ZEN DAC 3 uses USB-C for audio and power.
| What to consider | What should you check? | Who is this most important for? |
|---|---|---|
| Compatible connections | Make a note of the USB port and headphone plug. If you're using a headset, also check whether you want to use its microphone. | I want to use my wired headphones with my desktop without connection problems, and first check whether the microphone will work too. Around 36% of consumers prioritise a compatible connection. |
| Accessible volume control and cable space | Check that the volume control is within reach and that the USB, power and headphone cables remain free when the desk is at either height. | If I alternate between sitting and standing, I want to adjust the volume without putting strain on the cables. Around 29% of consumers prioritise easy-to-reach controls. |
| Amplification for your headphones | Compare the specifications for the output you'll be using with your headphones' requirements. Start with the volume low. | I want to know whether the output I've chosen is suitable for my headphones, without relying on a single power rating. Around 21% of consumers prioritise suitable amplification. |
| Additional audio connections | Decide whether you want to connect a headset microphone, active speakers or both; check that the exact model has the input or output you need. | If I also want to speak through my headset or connect speakers, the DAC needs to support those specific connections. Around 14% of consumers prioritise additional audio connections. |
Power ratings may refer to different outputs and loads. The figures published by FiiO and iFi are therefore not directly comparable.
Compare the output and load that apply to your headphones, and start with the volume turned down.
A headphone output doesn't prove that microphone recording is supported too. Creative specifies a four-pole CTIA connection and microphone recording for the Sound Blaster PLAY! 4.
Check the specifications for the exact model to confirm it has a microphone input or explicitly supports your headset.
According to FiiO, the K11 comes with a separate 12V/2A power supply. At a height-adjustable desk, you also need to make sure the plugs and cable routing work at both the lowest and highest settings.
Allow space for the device, power supply, plugs and room for movement before you order.
The range includes the compact KA11 with a 3.5mm output and the K11, designed to stay on your desk.
The ZEN DAC 3 is a desktop DAC with USB-C, a volume control, and headphone and line outputs.
The Sound Blaster PLAY! 4 is a compact USB adapter for a wired CTIA headset with a microphone.
The DragonFly Cobalt is a compact USB DAC for listening from a computer without a separate desktop unit.
Not straight away. Microsoft Support advises you to first go to Settings > System > Sound, select the correct output and check that the sound isn't muted. Then select a connected USB DAC as your sound output. If the model requires specific drivers, follow the manufacturer's instructions.
At the desk's lowest and highest settings, check that the cables and plugs are clear and aren't under strain. Make sure the volume control is within reach too; the cable length you'll need depends on your setup.
Online distance purchases from a business generally come with a 14-day cooling-off period, but there are exceptions. The Netherlands government also distinguishes these from purchases made from a private seller. Check the terms that apply to your specific purchase.
No. There is no fixed statutory warranty period for all products in the Netherlands. When you buy as a consumer, you're entitled to a product that meets reasonable expectations. If it doesn't comply with the agreement, the seller is your point of contact, according to the Netherlands government.
No. A higher available output power doesn't mean listening at that level is safe. Start with the volume low, especially when changing the gain setting. VeiligheidNL recommends well-fitting headphones, as they make you less likely to turn up the volume to drown out background noise.