Who is a USB DAC suitable for?

Listeners short on spare sockets

Want to listen to concert files through wired headphones without adding another mains adapter to your desk? Check that the DAC can draw power from a suitable USB source. Fosi Audio describes the DS2-2024 as USB-powered, while TOPPING says the DX1 II uses USB for both audio and power.

Listeners with a particular headphone connector

Your choice depends on the port on your source and the plug on your headphones. Check the exact version: according to FIIO Netherlands, the KA11 is available with a USB-C or Lightning connector and has a 3.5mm output; the Fosi Audio DS2-2024 has 3.5mm and 4.4mm outputs.

Listeners with a dedicated review setup

If you mainly listen on a computer, a device designed for a fixed setup may suit the way you use it. TOPPING says the DX1 II is primarily intended for computers. Just check that your USB port supplies enough power.

What should you look for when choosing one?

Start by checking the connection and power requirements of your existing source and headphones. Then decide whether you’d prefer a small dongle or a device for a fixed setup.

What to consider What to look for Who is this most important for?
USB power Check how the exact version is powered and whether your computer or phone supplies enough USB power. According to Fosi Audio, the DS2-2024 has no built-in battery; TOPPING says the DX1 II is powered via USB. I don’t want to use an extra mains adapter when listening back, so I check the power supply from my source; around 36% of consumers put saving a socket first.
Compatible connections Check whether the USB-C or Lightning connector on your source matches your headphone plug. Check the version: according to FIIO Netherlands and Fosi Audio, the KA11 has a 3.5mm output, while the DS2-2024 has 3.5mm and 4.4mm outputs. I want to connect my wired headphones directly, so I check both plugs; around 29% of consumers say connection compatibility is their top priority.
Evaluating the recording Compare it with the existing output at the same volume. Also check your player and system settings: TOPPING explains that the sample rate shown for the DX1 II is the rate of the incoming signal, and that software may resample the file first. I want to tell what comes from the file and what’s down to my playback settings, so around 21% of consumers put assessing their listening setup first.
Fixed setup and controls Decide whether on-device controls would be useful and whether you have enough space. The DS2-2024 has volume buttons; TOPPING says the DX1 II is primarily for computers and warns that using it with a phone may depend on power and compatibility. I mainly listen at a fixed computer setup and want to be able to use the controls there; around 14% of consumers make this setup their main requirement.

Common buying mistakes

  • Assuming every phone can power a USB DAC

    A USB-powered model won’t necessarily work with every phone. TOPPING specifically warns that the DX1 II may not start on some phones because of insufficient power or compatibility issues.

    Check that your source works with the exact model you’re considering. Choose a device for a fixed computer setup based on how you’ll use it, not just because it doesn’t need a separate mains adapter.

  • Confusing different versions with similar model names

    Fosi Audio describes several DS2 versions; the DS2-2024 is the model with the 3.5mm and 4.4mm outputs mentioned here. The GO link and GO link 2 are also separate models.

    Before buying, check the full model name, version, source connector and headphone outputs of the one you’ve chosen.

  • Treating the displayed sample rate as proof of better playback

    According to TOPPING, the player or operating system may resample the file before the signal reaches the DX1 II. In that case, the displayed rate won’t necessarily tell you which settings were applied to the original file.

    Check your player and system output settings before drawing conclusions about the concert recording.

Brands to consider

FiiO

The KA11 is a compact dongle option if the connector on your source and the 3.5mm headphone output are a good match.

  • FIIO Netherlands lists USB-C and Lightning versions of the KA11, both with a 3.5mm output.
  • The product page doesn’t list a battery for the KA11. Claims of better sound quality come from the manufacturer and aren’t the result of an independent listening test.

iFi audio

The GO link is a portable USB-C DAC for wired headphones with a compatible connection.

  • iFi audio lists a 3.5mm output and 70 mW at 32 ohms for the GO link.
  • The claim that it offers a significant improvement over built-in audio comes from iFi audio and doesn’t guarantee an improvement with your listening setup. Don’t confuse the GO link with the GO link 2.

Fosi Audio

The DS2-2024 is a dongle option if both 3.5mm and 4.4mm connections would be useful.

  • Fosi Audio lists both outputs and volume buttons for the DS2-2024. According to the manual, this model has no battery and draws power via USB.
  • Check the exact DS2 version. Power figures for different versions aren’t necessarily comparable; the output and load matter too.

TOPPING

The DX1 II is a USB-powered device for a fixed computer setup.

  • TOPPING says USB carries both audio and power, and that the model is designed primarily for computers.
  • It may not work with a phone because of insufficient power or incompatibility; this doesn’t automatically apply to all TOPPING models.

Joybuy products

Related products will be available soon.

Frequently asked questions

How do I connect a USB DAC to listen back to concert files?

Connect the suitable USB port to your source, plug your headphones into the right output and, if needed, select the DAC as your audio output. Fosi Audio recommends selecting the output for the DS2-2024; with the DX1 II, your player and system settings may determine which sample rate the device receives.

Do I need to charge a USB-powered DAC?

According to the manual, the Fosi Audio DS2-2024 has no built-in battery and draws power via USB. Don’t assume other DAC models work in the same way; check the specifications and manual for the exact version.

Is a DAC with higher output power automatically better for long listening sessions?

No. Output power alone doesn’t determine how a DAC will sound with your headphones. Start at a low volume and avoid listening at high volumes for long periods: the World Health Organization points out that sound level, listening time and frequency of exposure all contribute to the risk of hearing damage.

Can I use downloaded concert recordings in the Netherlands to assess a DAC?

The DAC doesn’t change the rights attached to a recording. The Dutch government says that downloading from an illegal source is prohibited; private copying is subject to conditions, and sharing or making a copy public isn’t allowed. So check the source and usage rights for the specific recording.