Who is a USB DAC for?

Listener with demanding headphones

Your main concern is whether the output, connector and drive capability are right for your wired headphones. Compare power ratings only when they refer to the same load and output. FiiO and iFi audio list different outputs and output ratings for their desktop DACs.

Listener at a fixed desk

You want to adjust the volume easily while sitting or standing, and might also want to connect active speakers. Consider the power supply and the space taken up by plugs and cables. FiiO and iFi audio describe these connection and control options for specific models.

Minimalist laptop listener

You want to keep equipment to a minimum on your moving desktop and mainly need a suitable USB-to-headphone connection. iFi audio describes the GO link as a compact USB-C DAC; check that its connection is compatible with your computer.

What should you look for when choosing?

Desktop DAC with headphone amplifier

Choose this option if: you have a permanent setup and need a volume control, a suitable headphone output or analogue outputs.

Trade-off: allow room for the DAC and its cables. FiiO says the K11 needs a separate 12 V/2 A power supply. The iFi ZEN DAC 3 can be powered via USB, according to its manual, while the optional 5V power supply is not included.

Compact USB DAC

Choose this option if: a clear desktop and a simple connection to a compatible computer matter more to you than extra controls and outputs.

Trade-off: check which USB connection you need and whether you’ll need any adapters. A compact design won’t offer the same controls and connections as a desktop unit.

Assess your existing audio output first

Choose this option if: your wired headphones already connect and you don’t have a specific issue with control, connectivity or drive capability.

Trade-off: you won’t gain a volume control or a new headphone output. Apple lists situations where an external DAC is needed for playback above 48 kHz, depending on the device.

What to consider What to look for Who is this important for?
Headphone compatibility Check the plug, the output you’ll use and the power at your headphones’ impedance. Start at a low volume. If I want to use my wired headphones, I first want to know whether the plug and output are compatible. Around 40% of consumers prioritise compatibility with their headphones.
Controls and cable clearance Measure the space for the device and plugs; check the cable route at all desk heights and how the model you choose is powered. If my desk moves up and down, I want to adjust the volume easily without cables getting in the way. Around 30% of consumers prioritise easy controls and a practical desk setup.
Lossless playback chain Check the file or stream, the lossless setting and whether your computer is using the DAC as its audio output. If I want to play lossless music, I want to know what my source and settings are actually outputting. Around 20% of consumers put correct lossless playback first.
Desktop space Compare the USB connection and headphone plug you need; decide whether you also need a volume control or extra analogue outputs. If I want to keep equipment on my desk to a minimum, a compact connection is more appealing than a larger device. Around 10% of consumers prioritise a clear desktop over extra controls and connections.

Buying pitfalls

  • Assuming a high sample rate guarantees lossless playback

    Your source and chosen settings both affect what gets played; a high DAC specification alone doesn’t guarantee that the music source is lossless.

    Check the whole playback chain and your source settings before paying for formats you don’t use.

  • Assuming every desktop DAC is powered via USB

    The FiiO K11 needs a separate 12 V/2 A power supply. According to its manual, the iFi ZEN DAC 3 can also be powered via USB.

    Check how the exact model is powered and allow for cable clearance at all desk heights.

  • Choosing a 4.4mm output without a compatible headphone cable

    A DAC with a 4.4mm output won’t automatically make it compatible with the plug on your existing headphones.

    Note the plug on your headphones and compare it with the output you actually plan to use.

Brands to consider

FiiO

The K11 is a desktop option for wired headphones, with a possible RCA connection to other audio equipment.

  • FiiO gives separate output ratings for the K11’s 6.35mm and 4.4mm outputs and lists a volume control.
  • The K11 needs a separate 12 V/2 A power supply; this doesn’t tell you anything about other models from the brand.

iFi audio

The ZEN DAC 3 is a desktop option, while the GO link offers a compact USB-C connection.

  • iFi audio says the ZEN DAC 3 has two headphone outputs, volume control and fixed or variable analogue outputs. iFi describes the GO link as compact.
  • According to the manual, the optional 5V power supply for the ZEN DAC 3 is not included. This model’s specifications don’t automatically apply to the GO link.

AudioQuest

The DragonFly Cobalt is a compact alternative for a computer with a compatible USB connection.

  • AudioQuest lists a built-in headphone amplifier, a USB-C extension cable in the box and support up to 24-bit/96 kHz.
  • For the Lightning devices mentioned, AudioQuest lists a separate Apple Lightning-to-USB adapter. Claims about audible improvements are the brand’s own statements, not independent measurements for your setup.

Schiit

The Fulla E is an option for a workspace where you need a separate microphone input as well as music playback.

  • Schiit describes the Fulla E as having a microphone input, a headphone output and a second USB port for power.
  • Check the exact model’s version and connections before choosing it for your desk setup.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need to buy a DAC to listen to Apple Music lossless?

Not always. Apple describes different lossless settings and capabilities for different devices; for certain devices and playback above 48 kHz, Apple recommends an external DAC. So check your specific source and chosen audio quality.

How do I connect the FiiO K11 to my computer?

FiiO describes connecting it with a USB-C data cable, selecting USB input mode and choosing the K11 as the output in both your system and playback software. You’ll also need to account for the separate 12 V/2 A power supply and choose an output that suits your headphones.

How can I avoid an unexpectedly high volume?

Start at a low volume, especially when changing headphones or adjusting the gain. The iFi ZEN DAC 3 manual warns you to turn the volume down before changing the gain.

In the Netherlands, is a DAC only covered by a two-year warranty?

No. According to ACM ConsuWijzer, the statutory guarantee depends on what you could reasonably expect from the product under normal use; a shorter guarantee from the seller or manufacturer does not take away that right. If there’s a fault, contact the seller.

What should I look for in terms of product safety and CE marking?

Applicable product rules apply to electrical and electronic equipment placed on the market in the Netherlands. The Dutch government explains that, after carrying out a conformity assessment, the manufacturer must affix the required CE marking and draw up an EU declaration of conformity. This general requirement does not, by itself, confirm that a specific model or offer complies with the rules.