Who is this choice relevant to?

Listeners with specific headphones

You want the output, plug and power to suit your wired headphones. Compare power ratings only for the output, load and operating mode relevant to your setup; FiiO lists different figures for its K11 and KA13.

Listeners with their own hi-res files

You want to know whether both the DAC and your source settings can handle the audio signal as intended. Topping explains that player and system settings affect the sample rate shown.

Listeners at an adjustable desk

You’re choosing between a compact connection and a desktop model that may offer more controls or outputs. Allow room for the device, power supply and cables as the desk moves; connections and power requirements vary by model.

What should you look for?

Compact USB DAC

Best for: anyone who mainly uses one pair of wired headphones with a computer and wants to keep their desk free of extra equipment.

Bear in mind: check that the headphone output is right for you and that the compact DAC has the connections and controls you need.

Desktop DAC with headphone amplifier

Best for: anyone who wants an easy-to-reach volume control, suitable headphone outputs or a line output for active speakers at a dedicated listening spot.

Bear in mind: allow room for connected plugs and cables; some models also need a separate power supply.

What to consider What to look for Who it’s for
Connecting and powering headphones Check that the plug fits and compare the power rating for the right output and relevant load. If you want to use your wired headphones without a suitable connection or enough power, check that they’re compatible first. Around 33% of consumers put headphone compatibility first.
Hi-res files and source settings Compare your files with the DAC specifications and check your computer and player’s audio output settings. If you want to play your own files using the intended settings, check what your source sends to the DAC. Around 27% of consumers prioritise accurate file playback.
Space, power and cables When measuring, allow for connected plugs; check the cable route and any separate power supply at the desk’s full range of heights. If your desk regularly moves up and down, you’ll want the device, power supply and cables to fit comfortably. Around 27% of consumers prioritise their desk setup.
Extra outputs and controls Check that the line output suits your speaker input and whether the volume is fixed or variable. If you want to connect active speakers as well as headphones, check which outputs and volume controls are available. Around 13% of consumers prioritise extra connections and controls.

Common mistakes when choosing

  • Assuming the highest mW figure is the overall power rating

    Power ratings can vary by output, load and operating mode. FiiO lists different figures for the K11 and KA13.

    Only compare figures for the output and test conditions that are relevant to your headphones.

  • Assuming a hi-res label guarantees the original signal

    Your player and operating system settings can change the signal the DAC receives. Topping explains that player and computer or phone settings affect the sample rate.

    Check your files, the DAC’s supported modes and your output settings as one complete chain.

  • Measuring only the device itself

    A desktop model may need space for connected cables and a separate power supply. For example, FiiO specifies DC 12 V/2 A for the K11.

    Check the full setup with your desk at both its lowest and highest positions.

    Depending on the model, you may need to allow room for extra cables or a power connection.

Brands to consider

FiiO

The KA13 is a compact USB-C option, while the K11 is a desktop model with additional connections.

  • FiiO lists 3.5mm and 4.4mm outputs for the KA13. The K11 includes an RCA line output, among other connections.
  • The K11 requires DC 12 V/2 A. Power ratings depend on the model, output, load and, in some cases, operating mode.

iFi audio

The ZEN DAC 3 is a desktop DAC with a headphone output and adjustable analogue outputs.

  • According to the manual, the model has 6.3mm and 4.4mm headphone outputs, RCA and 4.4mm analogue outputs, and switchable gain.
  • The manual recommends keeping the volume low when switching PowerMatch.

AudioQuest

The DragonFly Cobalt is a compact USB DAC and headphone amplifier.

  • AudioQuest lists support for up to 24-bit/96 kHz and includes a USB-C extension cable.
  • Check that the stated support suits your files and source; this specification doesn’t prove you’ll hear better performance.

Topping

The DX1 II is a desktop option designed for computers and powered via USB.

  • Topping explains that player and system settings can affect the sample rate shown by the device.
  • According to Topping, power supply and compatibility may vary when you use a phone.

Related products

Related products coming soon.

Frequently asked questions

Why does my DAC show a different sample rate from the music file?

Your player or operating system may output the signal at a different sample rate. Topping explains that the DX1 II shows the frequency it receives. So, check the output settings for your setup before concluding that the DAC doesn’t support your file.

How do I connect a new DAC safely?

Connect the appropriate USB and headphone cables, select the DAC as your audio output if needed, and start with the volume low. In the ZEN DAC 3 manual, iFi specifically warns against setting the volume too high when switching PowerMatch.

Do I need a separate power connection?

It varies by model. FiiO specifies DC 12 V/2 A for the K11; the ZEN DAC 3 manual lists USB-C for audio and power, as well as a DC power input. When choosing, check what’s included with the specific model.

What are my rights when shopping online in the Netherlands?

According to ACM ConsuWijzer, for a standard online product purchase you’ll usually have a statutory cooling-off period of up to 14 days after delivery, with some exceptions. If a product is faulty, the seller is responsible for providing the remedy required by law. The cooling-off period and your statutory rights for faulty goods are separate matters.