If you mainly compare existing recordings, choose a USB DAC with a headphone output and drive capability to suit your headphones, and match the perceived loudness of the recordings too. If you also record with a microphone or instrument and want to monitor the sound as you record, an audio interface is better suited to the job. A higher stated output power does not, by itself, prove that you’ll hear differences between recordings more clearly.
Who is a USB DAC or audio interface for?
Desktop recording comparison
You listen to different versions of a recording through the same headphones and want to assess the differences without automatically favouring the loudest version. Audacity describes loudness normalisation as a way to make the levels of multiple tracks comparable.
Listener with several connection needs
You’re looking for a permanent USB setup with a headphone output and perhaps a connection to active speakers. Check which plugs and outputs your equipment needs.
Home musician who also records
As well as listening back, you want to connect a microphone or instrument and hear the input signal while recording. Focusrite describes direct monitoring as routing the input signal to the listening output.
What should you look for when buying?
| What to consider |
What should you check? |
Who is this important to? |
| Fair comparison of recordings |
Use the same headphones and playback chain, and match the perceived loudness of the clips. Audacity describes loudness normalisation as a way to listen to tracks at comparable levels. |
If I want to assess recordings without a louder clip swaying my judgement, I first match their perceived loudness. Around 36% of consumers put fair comparison first. |
| A suitable headphone output |
Check your headphones’ plug and wiring, the output you’ll use, and the output specifications at the stated load. |
If I want to keep using my existing headphones, I first check that the connection and drive capability are suitable. Around 29% of consumers prioritise this. |
| Recording and monitoring too |
Check whether you need microphone or instrument inputs, and whether direct monitoring suits the way you work. |
If I want to record with a microphone or instrument as well as listen back, and monitor while recording, I look at the inputs and monitoring feature. Around 21% of consumers put recording first. |
| Moving between workspaces |
Check your computer’s USB connection, whether you need an adaptor, and whether the headphone plug fits. |
If I need to move my DAC between my laptop and workspace, I look at the connections and portability. Around 14% of consumers prioritise switching easily between listening locations. |
Common pitfalls
-
Assuming the loudest clip sounds best
A difference in playback level can make it harder to compare recordings fairly, whatever DAC you use.
Match the perceived loudness of the clips and compare them through the same playback chain.
-
Assuming a 4.4mm output or power rating guarantees compatibility
The connection needs to match your headphones’ plug and wiring. A power rating also applies to the stated output and load; it doesn’t automatically apply to every combination.
Check which output you’re using and read the power specification alongside the corresponding load.
-
Choosing a listening DAC when you also want to record with a microphone
A USB DAC for playback won’t necessarily have the recording inputs and monitoring feature of an audio interface. Focusrite lists recording inputs and direct monitoring for the Scarlett Solo 4th Gen.
Before choosing, decide whether recording and monitoring as you go are part of your workflow.
-
Confusing a manufacturer’s warranty with all your statutory rights
According to ACM ConsuWijzer, any commercial guarantee is in addition to the statutory guarantee. The latter depends on what you could reasonably expect from the product.
Keep your purchase and model details, and contact the seller if there’s a fault to discuss a suitable solution.
Relevant brands and product ranges
These product ranges illustrate different connection and use scenarios; a brand being mentioned does not mean that a specific model is available.
FiiO
The K11 is a desktop USB DAC and headphone amplifier for a permanent listening setup with multiple outputs.
- According to FiiO, the K11 has USB, optical and coaxial inputs, 6.35mm and 4.4mm headphone outputs, and RCA line outputs.
- FiiO’s stated 1.400 mW applies to the balanced output at 32 Ω; this figure does not automatically apply to other outputs or headphones.
iFi audio
The ZEN DAC 3 is a desktop USB DAC with headphone and line outputs, including for a setup with speakers.
- The iFi audio manual lists a USB-C connection, an unbalanced 6.3mm and balanced 4.4mm headphone output, and RCA and 4.4mm line outputs.
- The manual specifies a maximum of 390 mW; this maximum is not a universal power rating for every headphone combination.
Focusrite
The Scarlett Solo 4th Gen is a USB audio interface for anyone who wants to record with a microphone or instrument as well as play audio.
- According to Focusrite, the model has recording inputs and direct monitoring.
- Focusrite specifies an output impedance of 50 Ω for the headphone output, and a maximum of 32 mW at 33 Ω. So assess compatibility with your own headphones’ specifications.
AudioQuest
The DragonFly Black v1.5 is a compact USB DAC with a headphone amplifier for listening in different locations.
- AudioQuest describes this model as portable and designed to connect to computers and mobile devices.
- Check that the USB connection or required adaptor suits your device, and that your headphone cable fits. The product’s portability claims are not independent proof of better-sounding audio.
Related products
Related products coming soon.
Frequently asked questions
Does a USB DAC automatically make two recordings fair to compare?
No. First match the perceived loudness of the clips, and use the same headphones and playback chain. Audacity describes loudness normalisation as a way to bring multiple tracks to comparable levels; this step is separate from choosing a DAC.
How do I connect a DAC or audio interface to listen back?
Connect the USB input to your computer, select the device as the audio output, then plug your headphones into a compatible output. A balanced 4.4mm output is not the same connection as a 6.35mm stereo output. If you also use an interface for recording, check the direct monitoring setting.
How can I protect my hearing during long listening sessions?
Start at a low volume and take breaks. The World Health Organization gives the example of a maximum of 40 hours per week at an average of 80 dB; at higher sound levels, safe listening time is shorter. This is general listening advice, not a guaranteed safe volume for every DAC or pair of headphones.
What terms should I check when buying online in the Netherlands?
Check who the seller is, the returns terms, and whether you need a suitable cable or adaptor. According to ACM ConsuWijzer, when you buy from a business online, you’ll generally have a statutory 14-day cooling-off period after delivery. This is separate from the statutory guarantee: the seller is responsible if the product doesn’t meet what you could reasonably expect with normal use.
Does a USB DAC sold in the Netherlands have to meet product regulations?
Applicable European requirements apply to electrical and electronic devices placed on the market in the Netherlands. Dutch government information covers, among other things, electromagnetic compatibility, CE marking and the EU Declaration of Conformity. The requirements for a particular model and any mains adaptor need to be checked for that product.