Start by checking your radio’s manual. Before choosing an adapter and cable, check the connection, output voltage and current required. One suitable port may be all you need for the radio; extra ports are useful mainly if you also want to connect another device. Keep the charging area clear of pillows and duvets, and check the compliance information for the specific adapter.
Who is this guide for?
Shoppers who want to check their radio will work first
You want to know whether a new adapter’s connection and electrical output are suitable for your existing radio. The Roberts Revival Petite 2 manual shows why you should check the requirements for your exact radio model.
Careful bedside chargers
You charge your radio close to your bed and want to position the charger, cable and radio in the open, where they won’t end up under the bedding. The Fire Service advises keeping chargers uncovered and not charging devices under a pillow or duvet.
Shoppers sharing a plug socket
You want to connect your radio and another device to the same socket. It’s important to make sure the ports and outputs are suitable for both cables and devices.
What should you look for when buying?
The Fire Service advises keeping chargers uncovered so they can dissipate heat, and not charging devices under a pillow or duvet.
| What to consider |
What should you check? |
Who should pay particular attention? |
| Safe charging by the bed |
Clear a space and check that the cable and charger are undamaged. |
If I charge my radio by my bed, I want to keep the equipment clear of bedding. Around 29% of consumers say safe charging is their top priority. |
| Suitable for your radio |
Read the requirements for your exact radio model and check the connection, output voltage and current required. |
I want to be sure the adapter and cable are suitable for my radio, not just that the plug fits. Around 36% of consumers put compatibility first. |
| Charging two devices at once |
Check the number and type of ports, and the output available for each device. |
If I also want to charge a second device from the same socket, I look for a suitable combination of ports. Around 21% of consumers say charging multiple devices at once is their main reason. |
| Easy-to-reach charging spot |
Check how long the cable needs to be and whether you can place the equipment in a clear space. |
I want to connect my radio without putting the charger or cable under the bedding. Around 14% of consumers prioritise an accessible, clear charging spot. |
Common buying mistakes
-
Mistaking the radio’s USB-A port for its charging input
The Philips TAR1659/00 charges via USB-C. Philips describes the USB-A port on this model as an output for charging other devices.
Check your exact radio model’s manual to find out which connection is used to charge the radio itself.
Choosing the wrong cable and adapter could mean the combination won’t work.
-
Choosing based on total wattage alone
A higher stated power rating doesn’t prove that a radio will charge faster. For example, the Roberts Revival Petite 2 manual specifies DC 5 V, 1 A; this requirement does not automatically apply to other radios.
First compare your radio’s requirements with the output of the port you plan to use. Only choose extra ports if you have a specific need to charge a second device.
-
Placing the charger where bedding could cover it
The Fire Service advises keeping chargers uncovered and not charging devices under a pillow or duvet.
Clear a space before charging and position the cable so that neither the radio nor the adapter ends up under the bedding.
Brands to consider
Belkin
The models listed have different combinations of USB ports. Check which connection your radio cable needs.
- According to Belkin’s own specifications, the WCB002vfWH has two USB-A ports, each with a maximum output of 12 W.
- Belkin lists the WCB009vfWH as having one USB-A port with a maximum output of 12 W and one USB-C port with a maximum output of 30 W.
- These model specifications don’t confirm that an adapter is suitable for an unidentified radio, and they are not an independent safety test.
Anker
The 511 Charger (Nano Pro) is a single USB-C port option for use with a compatible cable.
- Anker lists an output of 5 V/3 A or 9 V/2,22 A for model A2637.
- Anker says the cable is sold separately. The stated phone charging claims don’t prove that a radio will charge faster.
Philips
Information about the TAR1659/00 shows that a radio’s charging and output ports can serve different purposes.
- Philips states that the TAR1659/00 charges via USB-C, while its USB-A port can be used to charge other devices.
- This applies to that specific radio model, not all Philips radios. Philips lists the DLP2621C/12 wall charger as discontinued.
USB chargers at Joybuy
The selection below consists of USB mains adapters with USB-C, USB-A or both. Compare the port and output with your radio’s manual, and check the compliance information for the specific adapter. The Netherlands Food and Consumer Product Safety Authority makes clear that a CE mark alone does not prove that an individual product has been independently tested.
No image available
65 W wall adapter with retractable USB-C cable and 2 × USB-C ports
Worth considering if your radio cable has a USB-C connection; also check your radio’s electrical requirements.
The product title lists 65 W and two USB-C ports. The product description mentions a 70 cm retractable USB-C cable.
View at Joybuy
No image available
65 W wall charger with 2 × USB-C and 1 × USB-A
Worth considering if your radio and a second device need different USB connections; check the requirements of both devices.
The product title lists 65 W, two USB-C ports and one USB-A port.
View at Joybuy
No image available
30 W wall charger with USB-C and USB-A
Worth considering if you need either type of connection or want to connect two devices; check that the outputs are suitable for your devices.
The product title lists 30 W and one USB-C port and one USB-A port.
View at Joybuy
No image available
20 W wall charger with USB-C and USB-A
Worth considering if you’re looking for one adapter for two devices and both connections match your cables; check the output for each device.
The product title lists 20 W and one USB-C port and one USB-A port.
View at Joybuy
No image available
Multi-port USB charger with 10 ports
Worth considering if you want to connect several USB devices in one place; check the exact port configuration and output for your radio.
The product title lists ten ports, with USB-A and USB-C connections.
View at Joybuy
Frequently asked questions
Can I use any USB-C phone charger with my USB radio?
Not just because the plug fits. Compare your radio model’s charging requirements with the adapter’s output, and check the cable ends. The Roberts Revival Petite 2 manual specifies DC 5 V, 1 A; this is not a general requirement for all radios.
Can I leave the charger next to my pillow or under my duvet?
Keep the charger and radio uncovered, not under a pillow or duvet. The Fire Service advises keeping chargers in the open so they can dissipate heat.
Do I need two USB ports to charge my radio?
Not if you only want to charge the radio and one suitable port is enough. A second port is useful mainly if you also want to connect another device. If so, check that both ports and their outputs are suitable for the devices you want to charge.
What can I do if a charger I bought online turns out to be faulty?
Contact the seller. According to the Netherlands Authority for Consumers and Markets, the seller is responsible for the statutory guarantee if a product is faulty. Online purchases also generally come with a cooling-off period of up to 14 days after delivery; check whether any exceptions apply to your purchase.