Who should consider this?

Photographers using SD cards

After a shoot, you import photos from SD cards and want a USB-C reader with UHS support to match your cards. The SD Association explains the differences between UHS-I and UHS-II; Kingston specifies support for both on its Workflow SD Reader.

Photographers using CFexpress and SD

You use two card formats and want one reader for travelling. Check whether your CFexpress card is Type A or Type B: Sony Netherlands lists Type A and SD support for the MRW-G2, while Lexar lists Type B and SD support for the RW520.

Mobile users with SD and microSD cards

You import microSD files as well as camera photos to a USB-C device and want a compact setup. ProGrade Digital lists separate SDXC and microSDXC slots for the PGM0.5.

What should you look for when buying?

Start with the card format, then compare transfer support, how it connects at your table and how it protects your original files.

What to consider What should you check? Who is this important for?
The right slot for your camera card Check the card type printed on your card and compare it with the supported slots. Also check whether you use SD, microSD, CFexpress Type A or Type B. If I want to import nature photos from my existing camera card, the slot needs to match the card format exactly. Around 36% of consumers prioritise having the right card slot.
Import speed for large batches of photos Compare UHS-I or UHS-II support on your card and reader, and check the USB connection on the device you’re importing to. When I transfer lots of images at once, I want to know which interfaces my card and device actually support. Around 29% of consumers prioritise spending less time waiting for imports.
Space at a small workspace Check whether the reader plugs directly into your device or uses a cable, and whether there’s enough room beside the other ports. At a café table, I want to connect my USB-C device without the reader blocking other ports. Around 21% of consumers prioritise a compact, portable setup.
Protecting original files Check whether the exact model has a write-protection switch. Wait until copying is complete before disconnecting, and safely eject the card. If I want to protect my original photos, I look out for accidental writes and make sure I disconnect the reader carefully. Around 14% of consumers prioritise avoiding accidental changes.

Common pitfalls

  • Assuming CFexpress Type A and Type B use the same slot

    According to Sony Netherlands, the Sony MRW-G2 supports CFexpress Type A and SD. Lexar says the RW520 is designed for CFexpress Type B and SD. These card types aren’t interchangeable in these readers.

    Check the full label on your camera card and compare it with the slots on the exact model.

  • Assuming a quoted USB speed guarantees a certain import time

    Transfer speeds also depend on the card and the receiving system. Lexar says results with the RW520 may vary depending on the card and system configuration.

    Compare the specifications for your card, reader and device before choosing based on a quoted speed.

  • Removing the card as soon as copying is done

    Microsoft warns that disconnecting a device without safely ejecting it can lead to data loss. Apple also describes an ejection step for external storage.

    Check that copying has finished, then use your device’s eject function before disconnecting the reader.

Relevant brands to consider

Kingston

The Workflow SD Reader is designed for use with two SD cards and can be used separately from a dock with the included USB-C cable.

  • For model WFS-SD, Kingston specifies two UHS-II SD slots and backwards compatibility with UHS-I.
  • No microSD or CFexpress slot is listed for this model. The interface details are specifications, not independent import speed measurements.

ProGrade Digital

The PGM0.5 is a compact USB-C reader for users of SDXC and microSDXC cards.

  • ProGrade lists UHS-II slots for both card formats and a USB 3.2 Gen 1 interface.
  • No CFexpress slot is listed for this model. The quoted interface speed is not an independent import speed measurement.

Sony

The MRW-G2 is designed for a workflow using CFexpress Type A and SD cards.

  • Sony Netherlands specifies support for CFexpress Type A and UHS-I and UHS-II SD cards. USB-C and USB-A cables are included.
  • These specifications don’t show support for CFexpress Type B. The stated speed is a manufacturer claim.

Lexar

The RW520 combines CFexpress Type B and SD slots for photographers who use both card types.

  • Lexar lists two slots and included connection options for USB-C and USB-A.
  • Support for CFexpress Type A isn’t listed for the RW520. Lexar says speed figures depend on the system configuration and card.

Angelbird

The Card Reader PKT SD is a portable SD reader with a write-protection switch.

  • Angelbird lists SD UHS-I and UHS-II support, USB-C 3.2 Gen 1 and a read-only switch.
  • According to the product specifications, the SD version doesn’t read CFexpress cards. The stated protection is a manufacturer claim, not an independent reliability test.

Joybuy products for importing photos

These Joybuy products are suitable for importing SD and microSD cards via USB-C. Before buying, check that the slots match your cards.

Kingston Technology Workflow Dual-Slot SDHC/SDXC UHS-II Card Reader

Kingston Workflow Dual-Slot SDHC/SDXC UHS-II Card Reader

Suitable for an SD card workflow when you need UHS-II support and two SD slots.

Supports SDHC/SDXC and UHS-II. Kingston’s product specifications also list backwards compatibility with UHS-I.

The included USB-C cable lets you use the reader separately from a dock.

View at Joybuy
Verbatim CMH-13 USB Type-C 10000 Mbit/s Silver

Verbatim CMH-13 USB Type-C 10000 Mbit/s

A useful option if you want to use SD and microSD cards with a USB Type-C hub.

The product information lists SD and microSD card types and a USB Type-C connection. Check the full product specifications to make sure it connects to your device.

View at Joybuy

Frequently asked questions

Can a UHS-II reader read my UHS-I card?

It depends on the reader’s specifications. Kingston lists UHS-II SD support and backwards compatibility with UHS-I for the Workflow SD Reader. A UHS-I card won’t use the UHS-II interface available to a UHS-II card.

How do I disconnect the card reader after importing?

Wait until copying is complete, then eject the storage device before disconnecting it. Apple explains how to eject a device using Finder; Microsoft describes ‘Safely Remove Hardware’ for Windows 10 and 11 to help prevent data loss.

Do I need café Wi-Fi to import photos from a card?

Apple describes moving files locally from a connected card reader to a Mac as an action performed on the device. If you also sync files online using public café Wi-Fi, Veiliginternetten.nl advises taking care, for example by using mobile data. This network advice is separate from the card reader.

What cooling-off period and warranty apply to an online purchase in the Netherlands?

According to the Government of the Netherlands, online purchases from a business generally come with a 14-day cooling-off period, although there are exceptions. You’re also entitled to a product that works as it should. There’s no fixed statutory warranty period in the Netherlands, because the expected lifespan varies by product. If something goes wrong, contact the seller.

Does a CE mark or quoted USB speed prove that photos will be imported safely and quickly?

No. The Government of the Netherlands describes the CE mark as an indication that applicable product requirements have been met, not as a measure of import performance. Lexar says transfer speeds with the RW520 may vary depending on the card and system configuration. So compare the information for the exact model, your card and your device.