Who is a USB-C card reader for recorder audio suitable for?

Recorder users with microSD cards

You want to read the small card from your recorder directly on a USB-C device, and may not need an SD slot. The Tascam DR-05X manual lists microSD, microSDHC and microSDXC; check the card format supported by your own recorder model.

Users with multiple recorders

You switch between recorders that use SD and microSD cards, and want one reader with both slots. ACT, Trust and TP-Link describe models that support both card formats.

Creators with long recording sessions

You regularly copy large amounts of audio and want to weigh transfer speed against the card interface and a careful copying process. The SD Association stresses that both the card and receiving device must support the interface in use to benefit from it.

What should you look for in a USB-C card reader for field recorder audio?

First check the card format, then whether your laptop or tablet can open the files, and only then whether extra speed will make a difference with your card.

What to consider What to look for when buying Who is this important for?
The right card slot Check the card format in your recorder’s manual and the slots listed for the exact reader model. If I only use microSD, I don’t want to need an extra slot; around 36% of consumers prioritise card format.
Connection and file access Check that the receiving device supports USB-C and external storage, and has enough space. For mobile use, ACT lists USB-C OTG as a requirement for the AC7056. I want to access the files on the card and save them on my laptop or tablet; around 29% of consumers prioritise compatibility.
Copy recordings carefully Copy the files, check them in their new location and safely eject the card before removing it. If a recording is still only on the recorder card, I want to copy it carefully first; around 21% of consumers prioritise protecting recordings.
A suitable copy speed Check whether your card uses UHS-I or UHS-II; a stated maximum is not a measured copy time for your files. For larger transfers, I want to know whether my card can make use of a faster interface; around 14% of consumers prioritise speed.

Common mistakes when buying a card reader

  • Confusing USB-C with the right card format

    USB-C describes the reader’s connection, not which card fits in it. Some models only have a microSD slot; others have separate SD and microSD slots.

    First check your recorder’s card or manual, then compare it with the slots listed for the exact reader model.

    USB-C card reader brands to consider

    These brand examples relate to specific product ranges and features; appearing on this list is not a general assessment of a brand’s entire range.

    Trust

    Trust describes the Dalyx 24136 as a compact USB-C reader for SD and microSD cards.

    • For this model, Trust gives a maximum speed of 104 MB/s with compatible UHS-I cards.
    • This is a manufacturer’s specification, not an independent speed test or a guarantee of performance with your recorder card.

    ACT

    According to ACT, the AC7056 combines SD and microSD slots with USB-C and UHS-II support.

    • ACT lists OTG support for mobile use.
    • For mobile use, ACT says your device must support USB-C OTG. Stated speeds are specifications, not measured audio copy times.

    TP-Link

    According to TP-Link, the UA440C is a USB-C reader for SD and microSD cards, with a 150 mm cable.

    • The cable can be handy if you want to place the reader beside your device.
    • TP-Link lists UHS-II and a maximum speed of 312 MB/s; this maximum doesn’t automatically apply to every card and receiving device.

    SanDisk

    According to SanDisk, the QuickFlow USB-C is designed for microSD; the ImageMate PRO USB-C also supports SD and CompactFlash.

    • The product ranges are designed for different card formats.
    • SanDisk’s maximum speed of 312 MB/s for SD and microSD on the ImageMate PRO is not an independent test for recorder audio.

USB-C products for accessing cards on Joybuy

These products are designed to access SD and TF cards via USB-C; check card support and connections for your recorder and receiving device.

Acer ODK6V0 7-in-1 USB-C hub with SD and TF card reader

Acer ODK6V0 7-in-1 USB-C hub with SD and TF card reader

The title lists an SD and TF card reader; check that these card types match the card in your recorder.

The title also lists HDMI 4K@30Hz, 100W PD charging and three 5 Gbps USB 3.0 ports.

View on Joybuy
Verbatim CMH-13 USB Type-C hub, 10000 Mbit/s, silver

Verbatim CMH-13 USB Type-C hub, 10000 Mbit/s, silver

This hub has been selected for use with SD and microSD cards; before buying, check that its card support is suitable for your recorder model.

The product name lists USB Type-C and 10000 Mbit/s.

View on Joybuy
7-in-1 external DVD drive with USB 3.0, Type-C and SD/TF card reader

7-in-1 external DVD drive with USB 3.0, Type-C and SD/TF card reader

The product name lists an SD/TF card reader; check that the card types mentioned are suitable for your recorder.

The name lists USB 3.0, Type-C and compatibility with Windows, Linux and Mac OS.

View on Joybuy

Frequently asked questions about USB-C card readers for recorder audio

Do I need a microSD reader for every field recorder?

No. Check the card and manual for your exact recorder model. The Tascam DR-05X manual lists microSD, microSDHC and microSDXC; that doesn’t mean every field recorder uses the same card format.

Can I access a card on an iPad using a USB-C reader?

You can with a suitable card reader and connection; Apple explains how to access files on SD cards using the Files app. Check that your iPad supports external storage and has enough free space.

How do I remove the card after copying on a Windows computer?

Wait until the transfer is complete, check the files in their new location, then select ‘Safely Remove Hardware’. Microsoft recommends safely removing hardware to prevent data loss when disconnecting.

Do I have a cooling-off period and statutory guarantee when buying online in the Netherlands?

For online consumer purchases, a 14-day cooling-off period generally applies; check which exceptions and conditions are relevant. According to the Dutch government, there is no fixed statutory guarantee period in the Netherlands: you’re entitled to a product that works as it should, and the circumstances of any fault matter.

Is CE marking compulsory on every card reader?

Not without first checking which product rules apply to the specific model. The Dutch government states that CE marking may only appear on products for which it is required; the general rule doesn’t establish which requirements apply to a particular card reader.