First, check whether you’re mainly losing Wi-Fi upstairs, then try moving your existing router to a better spot before buying new equipment. If you can run a network cable upstairs, a wired access point is a targeted option. Without a cable, mesh can help if the extra node still receives a usable signal. Also check that it works with your ISP’s router, that you have the connections you need and that the specific device has a CE mark.
Who is this advice for?
Working from home with weak Wi-Fi upstairs
Your connection works downstairs, but video calls or working at your desk upstairs keep cutting out. First, work out what’s causing the problem, then decide where you need extra coverage. The Consumers’ Association notes that walls, ceilings and other obstacles can interfere with the signal.
Working from home with a cable upstairs
You can connect the floors with Ethernet and want a Wi-Fi access point or wired connection near your desk upstairs. TP-Link and ASUS describe Ethernet backhaul for connecting Wi-Fi nodes by cable.
Keeping your ISP’s router
You want to extend your existing network without replacing your ISP’s router. Check whether access point mode or compatibility with your current system is right for you. TP-Link explains that some advanced Deco features aren’t available in access point mode.
What should you look for when choosing?
Start by checking the connection in both work areas. If needed, try moving your existing router to a better spot; the Consumers’ Association lists walls and ceilings as possible causes of Wi-Fi interference.
| What to consider |
What should you look for? |
Who should pay particular attention? |
| Wi-Fi at your desk upstairs |
Check the signal at your desk and where an extra Wi-Fi node can still connect. |
If you work upstairs without a usable network cable, you’ll want a reliable Wi-Fi connection there. Around 36% of consumers prioritise coverage upstairs. |
| Ethernet upstairs |
Check where the cable comes out, how many LAN ports are available and what power the Wi-Fi node needs. |
If you have a cable upstairs, you can choose equipment suited to a wired connection between floors. Around 29% of consumers prioritise this wired link. |
| Keeping your current router |
Check that access point mode is supported and which features remain available. |
If you want to keep using your ISP’s router, the added equipment needs to work well with it and retain the features you want. Around 21% of consumers make this their main priority. |
| Equipment and management requirements |
Consider how many Wi-Fi nodes and connection accessories you need, how they’re powered and how updates are provided. |
If you want installation and management to be straightforward, consider what the extra nodes and their connections require. Around 14% of consumers prioritise these practical considerations. |
Common buying mistakes
-
Assuming the maximum Wi-Fi speed or coverage area is what you’ll get in the loft
Floors and other obstacles can weaken the signal. So a quoted speed or coverage area doesn’t tell you what reception will be like at your desk upstairs.
Check the signal where you work and see where an extra node can still get a usable connection. If possible, use a cable between Wi-Fi nodes.
-
Buying a second router system without considering your existing router
The operating mode you choose affects which features are available. According to TP-Link, some advanced features in the Deco app aren’t available when Deco is in access point mode.
Before choosing a system, check the operating mode, connections and features you need.
-
Choosing a wired access point without checking its power requirements
The official Ubiquiti UniFi U6+ specifications list PoE power and ceiling or wall mounting. These connection and mounting requirements need to be factored into the installation.
Check the power supply, mounting location and available Ethernet connection for the specific model.
Depending on the installation, you may also need a suitable PoE power supply or PoE switch, as well as mounting or cabling materials.
Brands to consider
TP-Link
Deco is a mesh option if you want to set up several Wi-Fi nodes and possibly keep your existing router.
- TP-Link describes Ethernet backhaul and access point mode for Deco. The Dutch Deco X50 page lists three gigabit ports per unit.
- According to TP-Link, some advanced features in the Deco app aren’t available in access point mode. Stated coverage and speeds aren’t measurements taken in your home.
ASUS
ZenWiFi XD5 is a mesh option for placing Wi-Fi nodes across floors, including if you can connect them by Ethernet.
- ASUS describes Ethernet backhaul for situations where Ethernet ports are available in the walls.
- Stated coverage and speeds don’t guarantee reception in your home. Check the bundle variant and the number of units.
FRITZ!
The FRITZ!Repeater 1200 AX is an option for extending an existing FRITZ!Box network; the manufacturer also says it can be used with other routers.
- FRITZ! lists a gigabit LAN port and a LAN connection to a FRITZ!Box.
- For integrated Mesh management, check that your existing equipment is compatible. A repeater doesn’t replace a modem router.
Ubiquiti
The UniFi U6+ is an option if you want to install a separate wired access point upstairs and manage the network yourself.
- The official specifications list a gigabit uplink and PoE power.
- Power and mounting are part of the installation. The stated coverage area doesn’t guarantee reception in a multi-storey home.
Mesh products at Joybuy
This selection of Joybuy products focuses on mesh systems for extending your wireless connection between rooms or floors. Check where you can place the extra nodes and whether they’ll receive a strong enough signal there.
No image available
TP-Link Deco BE68 2-pack
An option if you’re looking to extend your network with mesh and want to check whether a wired connection between the nodes would work in your home.
Bundle: 2-pack.
View at Joybuy
No image available
ASUS ZenWiFi BT8 2-pack, Tri-Band Wi-Fi 7 (802.11be), White
A mesh option to consider if you want to extend your existing Wi-Fi; check that it’s compatible with your current ASUS equipment first.
Tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7 (802.11be).
View at Joybuy
No image available
TP-Link AX1800 Whole Home Mesh Wi-Fi 6, 2-pack
An option if you’re looking for a mesh system and want to check whether a wired connection between the nodes is practical.
Wi-Fi 6; AX1800; bundle of two units.
View at Joybuy
No image available
TP-Link Deco M4 3-pack, Dual-Band Wi-Fi 5 (802.11ac)
Worth considering if you want to place several mesh nodes around your home; first work out how many you need.
Dual-band: 2.4 GHz and 5 GHz; Wi-Fi 5 (802.11ac); 3-pack.
View at Joybuy
No image available
TP-Link Deco X50 3-pack, Dual-Band Wi-Fi 6 (802.11ax)
An option if you want to set up several Wi-Fi nodes; check that a three-unit bundle suits the areas where you need coverage.
Dual-band: 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax); 3-pack.
View at Joybuy
Frequently asked questions
Do you need to replace your router if the internet is slow upstairs?
Not before you’ve worked out whether the internet connection itself is slow or you’re mainly losing Wi-Fi upstairs. For example, test the connection using a computer plugged in with a network cable, then compare the Wi-Fi in both work areas. You could also try moving the router.
How do you connect an extra Wi-Fi node if you’re keeping your ISP’s router?
Check that the system you choose supports access point mode and which features remain available. According to TP-Link, when using Deco, the main router continues to manage the clients and some advanced features in the Deco app aren’t available; you can use Ethernet backhaul too.
What costs and maintenance should you expect after buying?
Consider how many nodes you need, any cables and power supplies, energy use and how security updates are provided. The exact installation requirements depend on the equipment you choose and the connections available.
Can you use your own router in the Netherlands, and what should you look for in wireless equipment?
According to ACM ConsuWijzer, a provider can’t require you to use a particular modem or router brand or model. For wireless equipment in the Netherlands, the Dutch Authority for Digital Infrastructure highlights the need for the correct CE marking and compliance with applicable European requirements. Check the marking on the specific product; this advice doesn’t confirm that any individual product sold in a shop is compliant.