Who is this decision relevant to?

Home worker with weak Wi-Fi upstairs

Your internet works well by the modem, but video calls or working at your desk upstairs keep dropping out. You want to know whether an extra Wi-Fi point could help.

Home worker with an Ethernet cable running upstairs

You can connect your desk or a Wi-Fi point upstairs by cable, and would rather have a reliable wired connection between the points than a fully wireless setup.

Home worker in a small home with good coverage

You want to check whether repositioning or adjusting the settings will be enough before buying several Wi-Fi points.

What should you consider when choosing?

One router

Choose this if: the connection is good enough at both workspaces and you mainly want to replace your existing router.

Keep in mind: one device doesn’t add a second access point upstairs; the router’s position and any floors or walls will still affect coverage.

Wired access point or mesh node

Choose this if: your internet connection itself is good, Wi-Fi is weak at your desk upstairs and there’s a suitable Ethernet connection upstairs or one can be installed.

Keep in mind: running a cable takes work, and cabling requirements vary depending on the system and mode you’ve selected.

Wireless mesh extension

Choose this if: you need extra coverage upstairs but running a network cable isn’t practical.

Keep in mind: the extra node needs a usable connection of its own, so where you place it matters.

First, work out whether the internet connection itself is causing problems or whether Wi-Fi coverage upstairs is the issue. This will help you avoid choosing a router when the problem lies elsewhere.

What matters What should you look for? Who is this most relevant to?
Reliable Wi-Fi upstairs Compare a wired speed test with Wi-Fi at both workspaces; check where an extra node can still get a good connection. I want to work upstairs without Wi-Fi dropping out. For around 40% of consumers, coverage at the desk is the top priority.
Wired connection Check the cable route, available Ethernet ports and support for wired backhaul or access point mode. If I can run a cable upstairs, I want a wired connection for my workspace or Wi-Fi point. Around 30% of consumers give wired reliability top priority.
Extending coverage without a cable Check whether the system can work behind your existing modem and where the extra node can still receive a usable signal. I want Wi-Fi upstairs without a cable, but don’t want to replace my existing modem straight away. Around 20% of consumers prioritise an installation without cabling.
Avoiding unnecessary equipment First, test the connection at both workspaces and see whether you can reposition your existing router. I want to try changing the position or settings first, so I don’t buy more equipment than I need. Around 10% of consumers value keeping their purchase simple above all else.

Buying pitfalls

  • Assuming the advertised Wi-Fi speed means good coverage upstairs

    A high advertised speed doesn’t automatically tell you how well the connection will work at a desk on the other side of a floor or wall.

    Test the connection where you work, then decide whether to move the router or extend your network.

  • Placing a wireless mesh node where the signal is already almost gone

    The extra node needs to stay connected to the rest of your network; a spot with barely any coverage could prevent this.

    Try an intermediate position where the signal is still usable, or use Ethernet backhaul if you have a suitable cable.

  • Confusing the Deco X50 with the Deco X50-PoE

    TP-Link describes the Deco X50-PoE as a different model with PoE and 2.5GbE ports. Don’t assume these features are also available on the standard Deco X50.

    Check the full model name, version, number of units and ports before choosing.

Brands to consider

TP-Link

The Archer AX55 is a standalone router, while the Deco range offers mesh nodes to extend coverage upstairs.

  • TP-Link lists dual-band Wi-Fi 6 for the Archer AX55.
  • The Deco X50-PoE and standard Deco X50 are different models. The right way to connect Deco nodes by cable depends on the selected mode.

FRITZ!

A FRITZ!Repeater 1200 AX can extend an existing router’s coverage; paired with a compatible FRITZ!Box, it can be part of a FRITZ! mesh network.

  • FRITZ! describes a LAN bridge that lets you connect the repeater as an additional access point.
  • According to FRITZ!, integrating it into a FRITZ! mesh network requires a FRITZ!Box running FRITZ!OS 7 or later. This mesh functionality doesn’t automatically apply to routers from other brands.

ASUS

The ZenWiFi XD4 Plus is a mesh option for anyone looking to place several nodes and possibly use an existing Ethernet connection.

  • ASUS lists Ethernet backhaul and wall mounting for the XD4 Plus; it’s available in versions with different numbers of units.
  • A stated coverage area doesn’t guarantee that the signal will be strong enough at a particular desk on the other side of a floor.

KPN

For KPN customers, SuperWifi points offer a provider-specific way to extend their existing network.

  • KPN recommends positioning an extender between the modem and the area where better coverage is needed.
  • This doesn’t automatically mean the same mesh integration will work with another provider’s connection.

Products for Wi-Fi in an upstairs home office

These products offer different ways to get Wi-Fi to an upstairs home office: with one router, mesh nodes or a wired access point.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system

ASUS ZenWiFi BD4 Wi-Fi 7

Suitable if you want a mesh setup with a wired connection between the nodes.

Dual-band Wi-Fi 7 (802.11be); supports wired backhaul.

Joybuy
ASUS RT-AX52 AX1800 dual-band router

ASUS RT-AX52 AX1800

A standalone router for anyone looking for one central access point, with the option to expand later using compatible ASUS devices.

Dual-band Wi-Fi 6; Gigabit Ethernet; AiMesh expansion with compatible ASUS routers.

Joybuy
TP-Link Deco X50-PoE Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X50-PoE (2-pack)

Suitable if you want to use two mesh nodes and need PoE power for where they’re positioned.

Dual-band Wi-Fi 6; PoE support; two Ethernet ports per unit.

Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X50 (2-pack)

Suitable if you want a mesh connection between downstairs and upstairs, with the option to connect the nodes by Ethernet.

Dual-band Wi-Fi 6; three Gigabit Ethernet ports per unit; optional Ethernet backhaul.

Joybuy
TP-Link Omada EAP613 Wi-Fi access point

TP-Link Omada EAP613

Suitable if you want to extend an existing network with a wired access point near your workspace.

Wi-Fi 6; wall or ceiling mounting; PoE or DC power. This is an access point, not a standalone router.

Joybuy

Frequently asked questions

Should you buy a faster router straight away if video calls keep dropping out upstairs?

No, not automatically. First, test your internet connection using a network cable, then compare Wi-Fi at your workspaces. A slow broadband connection, a poorly positioned router and weak Wi-Fi upstairs each call for a different solution.

Where should you place an extra wireless Wi-Fi point?

Don’t put it somewhere the existing signal has almost disappeared. KPN recommends positioning an extender halfway between the modem and the area where better coverage is needed; then test the connection at your desk.

How do you connect two Deco nodes by cable?

Follow the connection instructions for the mode you’ve chosen. TP-Link says that, in router mode, satellite nodes should be connected to the LAN port on the main Deco. In access point mode, TP-Link says they can also be connected through the existing router.

What ongoing costs or maintenance should you check?

For a provider-supplied point, check whether you need to buy or rent it, and find out whether any features in a standalone system require a subscription. Also factor in firmware updates and the power consumption of extra nodes.

Can you use your own router in the Netherlands?

Yes. In the Netherlands, you’re free to choose your own router. ACM ConsuWijzer does note that a provider can refuse an insecure device of your own, which must meet the same security requirements. Additional conditions may apply to using your own modem, depending on your connection.

What should you look for in a Wi-Fi router for use in the Netherlands?

Radio equipment placed on the market in the EU must meet conformity requirements; manufacturers apply the CE marking when their product conforms. Make sure you also select the correct country: the Dutch Authority for Digital Infrastructure warns that incorrect country settings can lead to excessive transmit power and interference.