Who is this relevant for?

Gamer with a permanent spot upstairs

You mainly want a stable connection for one console or PC, and may be able to run a cable. The RDI says wired devices are less likely to experience interference than wireless equipment.

Renter with no route for a cable

You want better coverage upstairs without making permanent changes to your home. The signal strength where you plan to put an extra Wi-Fi point is important; the Consumers’ Association of the Netherlands highlights how important the placement of Wi-Fi extenders is.

Resident of a compact home

You want enough coverage without immediately installing several Wi-Fi points. Start by measuring the signal and seeing what difference placement makes. The Consumers’ Association of the Netherlands discusses both the impact of placement and the fact that Wi-Fi equipment stays switched on continuously.

What should you look for when choosing?

Ethernet upstairs

Choose this if: you have a permanent gaming spot and can run a cable to the console or an access point.

Bear in mind: you’ll need to manage the cable and possibly secure it in place; in a rented home, the route needs to be practical.

Extra wireless Wi-Fi point

Choose this if: you can’t run a cable upstairs, but there’s still a strong enough Wi-Fi signal at an intermediate spot.

Bear in mind: the connection between the points remains wireless and depends on placement and interference.

Replace the router only

Consider this if: your current router lacks the connections or features you need, and the signal upstairs is already usable.

Bear in mind: a different router downstairs won’t automatically solve the problem if the floor weakens the signal.

Start with the type of connection you can set up upstairs, then work out how many Wi-Fi points you need based on the signal strength.

What to consider What to look for Who is this most relevant for?
Stable gaming connection Check the Ethernet ports on your gaming equipment and Wi-Fi point, and whether the connection between the points is actually wired. If I have a permanent console or PC setup, I want to know whether I can run a cable all the way upstairs. Around 36% of consumers prioritise a stable connection for gaming.
Wi-Fi coverage upstairs Check the signal in your gaming area and at a possible intermediate spot. Make sure it’s strong enough where you plan to put the extra point. If I need Wi-Fi upstairs, I want to know where an extra point can still get a usable signal. Around 29% of consumers rank upstairs coverage as their top priority.
Suitable installation Decide whether a cable run on its own will do, and whether any changes you make can easily be reversed. In a rented home, I want a solution that suits the available cable route and the changes I’m allowed to make. Around 21% of consumers prioritise an installation that can be reversed.
No more equipment than necessary First test your current setup. Then compare adding one point with a set of two or more. In a compact home, I don’t want to manage more equipment than I need. Around 14% of consumers want to keep both purchasing and ongoing management to a minimum.

Common buying mistakes

  • Comparing advertised Wi-Fi speeds alone

    The Wi-Fi version alone doesn’t determine how useful the connection will be upstairs. Placement, interference and the signal passing through the floor all play a part.

    First check the signal in your gaming area, then decide how to get the connection upstairs.

  • Wiring a console to a wirelessly connected mesh point and assuming everything is wired

    The cable only connects the console to the point. The connection between that point and the rest of the network may still be wireless.

    Decide whether you only want to connect the console by cable, or whether you also need an Ethernet connection between the Wi-Fi points.

  • Choosing a three-piece set just because it ranks highly

    A three-point set isn’t automatically necessary in a compact home. The coverage you need depends on signal strength and placement.

    Measure the signal first, then decide how many points you need.

Relevant brands to consider

TP-Link

The Deco X50 is an example of a two-piece Wi-Fi 6 mesh system for extending Wi-Fi coverage upstairs.

  • TP-Link lists three Gigabit ports on each Deco X50 point, with optional Ethernet backhaul. This lets you connect the points by cable if you have a suitable route for one.
  • The stated coverage isn’t a guarantee for a particular rented home. Check the signal and choose the number of points to suit your situation.

ASUS

The ZenWiFi BD4 is worth comparing if you need access point mode or 2.5 Gbit ports.

  • ASUS lists access point mode, two 2.5 Gbit WAN/LAN ports and Wi-Fi 7 on 2.4 and 5 GHz for the BD4.
  • Check the pack size and model version. Wi-Fi 7 or 2.5 Gbit ports alone don’t prove that the signal will travel better through a floor.

FRITZ!

The FRITZ!Mesh Set 1700 is worth considering if you want to add mesh Wi-Fi to an existing modem or router.

  • FRITZ! says the set can connect to a router or fibre modem via LAN; the two-piece version consists of two Repeaters 1700.
  • Whether two or three points are right for you depends on your home and where you place them. The product description isn’t a signal measurement in your home.

Joybuy products

This selection includes mesh systems for extending Wi-Fi upstairs, with two-piece versions and a three-piece Deco X50 set. Ethernet backhaul is listed as an option for several models. Choose the number of points and connections to suit your signal strength, modem and possible cable route.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A good option if you’re looking for a two-piece mesh system with the option of using wired backhaul.

The product description lists Wi-Fi 7, tri-band Wi-Fi and multi-gigabit Ethernet ports on each point. Check that the ports and cable route are compatible with your existing equipment.

View at Joybuy
TP-Link Deco X20 AX1800 mesh system, 2-pack

TP-Link Deco X20 AX1800 (2-pack)

A good option if you’re looking for two mesh points to bring Wi-Fi to another part of your home.

The product description lists Wi-Fi 6, two points and optional Ethernet backhaul. Check where the points can go and whether you want to connect them by cable.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A good option if your signal measurements show that you need three mesh points in different areas.

The product description lists Wi-Fi 6, three Gigabit ports on each point and optional Ethernet backhaul. First check whether three points are right for your home and the available cable route.

View at Joybuy
TP-Link Deco X50-PoE mesh system, 2-pack

TP-Link Deco X50-PoE (2-pack)

A good option if you’re looking for two mesh points and the listed Ethernet and PoE connections suit your setup.

The product description lists Wi-Fi 6, two Ethernet ports per unit and PoE support. Check in advance which connections and power supply your setup requires.

View at Joybuy
TP-Link Deco X50 mesh system, 2-pack

TP-Link Deco X50 (2-pack)

A good option if you’re looking for a two-piece mesh system and may be able to run a cable between the points.

The product description lists Wi-Fi 6, dual-band Wi-Fi on 2.4 and 5 GHz, three Gigabit ports per unit and optional Ethernet backhaul. Check the cable route and connection to your modem.

View at Joybuy

Frequently asked questions

Do you need to replace your internet provider’s router?

No, not necessarily. The Consumers’ Association of the Netherlands advises against immediately buying a new router or extender to improve your Wi-Fi. First check the signal upstairs, then make sure any additional system has the right connection and operating mode for your modem.

Where should you place a wireless Wi-Fi point?

Put it somewhere that still gets a usable signal from your existing network, rather than in a room where the signal has already dropped out. Test the connection at the planned location; the Consumers’ Association of the Netherlands highlights how important the placement of Wi-Fi extenders is.

Is connecting your console to the Wi-Fi point by cable the same as running a cable downstairs?

No. A cable from the console to the point only makes that final leg wired; with wireless backhaul, the connection between the points remains wireless. The RDI says wired devices are less likely to experience interference than wireless equipment.

Do you need to consider ongoing costs?

Extra Wi-Fi points use electricity and are usually left switched on continuously, as the Consumers’ Association of the Netherlands explains for routers and Wi-Fi extenders. Also check whether any extra features you want to use require a subscription.