Who should consider this?

Student with their own internet equipment

You want to know which router, modem and, if applicable, fibre box need power to keep your connection running temporarily in your room. KPN says a fibre connection may need a separate socket for both the modem and the fibre box.

Student using shared internet

You have a router or Wi-Fi access point in your room, but first want to find out where the modem and any fibre box are located, and whether you can provide backup power for them too.

Student with limited space

You’re looking for backup power for the equipment it can support, while also considering how much space the UPS takes up and whether its alarms might be disruptive if it’s near your bed or desk.

What should you look for?

First, map out all your equipment and the connections it needs. Then choose a DC or 230V setup based on the devices that actually need backup power.

What to consider What should you check? Who is this important for?
The entire internet connection Note the location, connection and power supply for each device. Check whether all the essential devices can be powered at the same time during an outage. If I want to keep the whole connection running during a power cut, any essential equipment elsewhere must also have power. Around 29% of consumers are most concerned about powering the entire connection.
Runtime with your own equipment Add up the combined power consumption in watts and check the runtime at a similar load. I want to know how long my router and any other devices will keep working together. Around 23% of consumers prioritise enough backup time for their own load.
Space and noise Check the dimensions and the model-specific information about noise and alarms. If space is limited or the UPS is near my bed, I want to know in advance where it will fit and how its alarm works. Around 18% of consumers are most concerned about finding a compact, quiet place for it.
A solution that fits your needs Choose the required outputs and capacity based on the connected devices. Check which outlets provide battery backup. If a suitable DC device is all I need, I don’t want to choose a solution with connections I won’t use. Around 18% of consumers are mainly looking for a solution that suits the equipment they need to power.
Battery and maintenance Check whether the battery can be replaced and which parts are available for the exact model. I want to know in advance how battery replacement and after-sales support are handled. Around 12% of consumers are most concerned about maintenance and service.

Common buying mistakes

  • Only providing backup power for the router

    If your connection also needs a modem or fibre box, the router alone won’t keep the whole connection running if that other device loses power.

    Map out all your equipment and work out which devices you can actually provide with backup power.

  • Assuming the VA rating or number of outlets tells you the runtime

    A quoted runtime applies to a particular load. It doesn’t automatically tell you how long your combination of devices will keep working.

    Check the runtime at a load similar to your combined power consumption, and see which outlets are battery-backed.

  • Choosing a DC UPS because the plug looks like it fits

    A connector that looks right doesn’t confirm that the voltage and current are suitable for the device you’re connecting.

    Before connecting anything, compare the device’s required voltage, current and connector with the specifications for the device and UPS.

Brands as a guide to UPS options

Eaton

The 3S Mini 3SM36 is a compact DC option for a device with a compatible DC power supply.

  • According to Eaton’s Dutch model specifications, the UPS delivers up to 36 W, with a choice of 9, 12, 15 and 19 V. Eaton lists four barrel adapters, a user-replaceable battery and a noise level of less than 25 dB at 1 metre.
  • This model has no Schuko outlets. Check your device’s required DC connector, voltage and current, and make sure the input plug fits your socket.

APC by Schneider Electric

The BE650G2-GR is a 230V UPS for equipment that uses mains adapters.

  • Schneider Electric lists this model as 650 VA/400 W, with eight Schuko outlets and a user-replaceable battery.
  • For the exact version, check which outlets provide battery backup and what runtime is suitable for your load. The number of outlets doesn’t indicate the runtime.

CyberPower

The BU650E-FR is a line-interactive 230V model with three FR outlets that the manufacturer says are battery-backed.

  • CyberPower lists a rating of 650 VA/360 W, AVR and a configurable alarm. Its quoted runtime of 18 minutes is based on a load of 90 W.
  • That runtime won’t necessarily apply to your combination of router equipment. Check that the plugs are compatible and check the runtime at a similar load.

Salicru

The SPS 750 SOHO+ is a 230V option with Schuko outlets and AVR.

  • Salicru’s model specifications list a rating of 750 VA/420 W, four Schuko outlets and a transfer time of 10 ms.
  • Check the version, plug compatibility and runtime with the load from your equipment.

Related products on Joybuy

Related products coming soon.

Frequently asked questions

Do I need to connect the fibre box too?

If your connection needs a separate, electrically powered fibre box, that will also need power during an outage to keep the local connection running. KPN says a fibre installation needs separate power for the modem and fibre box, so check how your own connection is set up.

How do I connect a compact DC UPS?

Before connecting it, compare your device’s required voltage, current and connector with the outputs and adapters on the exact UPS model. The Eaton 3SM36 offers several DC voltages but no Schuko outlets, so its settings and connections must be suitable for your device.

How do I maintain and dispose of the battery?

Follow the manual for the exact model and check whether the battery is user-replaceable. Milieu Centraal advises taking used batteries and rechargeable batteries to a separate collection point rather than putting them in general waste.

What are my rights if a product is faulty or I buy online in the Netherlands?

If a product is faulty, contact the seller about your statutory guarantee. According to the Dutch government, there is no fixed statutory guarantee period in the Netherlands. For distance sales from a business, you usually have 14 days to change your mind, although exceptions apply.

Is CE marking required for a mains-powered UPS sold in the Netherlands?

A mains-powered UPS placed on the market in the Netherlands must comply with the applicable EU product rules and carry the required CE marking. The Netherlands Enterprise Agency and EUR-Lex explain the CE rules. The directives and conformity documents that apply to a specific UPS must be determined for each product. CE marking alone says nothing about the battery runtime.