Who needs a UPS for a NAS?

NAS owner looking for a safe shutdown

You want to save files and safely unmount volumes if the power goes out. Synology explains how a NAS can stop services and unmount volumes, so check whether your NAS can communicate with the UPS and set up its response to a power cut.

Student who wants to keep their network running

You may want to connect a modem or router to battery backup as well as your NAS. Add up the wattage of all the devices you want to keep running. Synology recommends taking the total power consumption of connected devices into account when choosing a UPS.

Student short on space

You need a UPS that fits in your room without compromising on the connections you need or the time available for a safe shutdown. The Eaton 3S Gen2 is a compact UPS range. Check the dimensions and which outlets provide battery backup for the exact model you’re considering.

What should you look for when choosing one?

Start with what matters most for your setup: safely shutting down your NAS, keeping extra devices running, or factoring in space and maintenance.

What to consider What should you check? Who is this important for?
Safe shutdown Check that your NAS model and operating system support UPS communication. Connect the communication cable and set up the safe mode. If I want to avoid a power cut leaving my NAS without a configured shutdown response, I’ll focus on communication compatibility. Around 36% of consumers prioritise safe shutdown.
Runtime and load Add up the wattage of the devices that need to stay on, then compare it with the maximum output in watts and the runtime at a similar load. If I want to keep my modem or router running as well as my NAS, the UPS needs to handle the combined load. Around 29% of consumers give longer backup time top priority.
Space and outlets Check the dimensions, plug type and whether each outlet provides battery backup or only surge protection. If the UPS needs to fit in a small student room, I don’t want to sacrifice the connections I need just to get a smaller model. Around 21% of consumers prioritise limited space.
Purchase and maintenance Check whether the battery in the exact model can be replaced and what service and replacement information applies to it. If I want to factor in the purchase price and future maintenance costs, I’ll also check the battery and service information for the exact model. Around 14% of consumers prioritise total cost.

Common buying mistakes

  • Looking only at the VA rating

    The VA rating alone won’t tell you how long your NAS and any network equipment can keep running.

    Add up the wattage of the connected devices and compare the runtime at a similar load.

  • Assuming every Schuko outlet provides backup power

    On the Eaton 3S Gen2 3S550D, three outlets provide surge protection only, so devices connected to them won’t keep running during a power cut.

    Connect your NAS and, if needed, network equipment to outlets marked as providing battery backup.

  • Assuming the NAS will shut down safely by itself

    Your NAS needs to be able to receive UPS status information and have an appropriate shutdown response configured.

    Check that your NAS and UPS are compatible, connect them for communication and configure the safe mode.

  • Not considering a model’s service period

    Schneider Electric lists 31 December 2026 as the end-of-sale date for the APC BX950MI-GR and 31 December 2028 as the end of standard service.

    When buying, compare the details for the exact model with the manufacturer’s recommended successor.

Brands and models to consider

Eaton

The Eaton 3S Gen2 range includes compact offline UPSs. The Dutch 3S550D model has Schuko outlets and USB-HID communication.

  • According to Eaton, the 3S550D has a replaceable battery and three battery-backed outlets.
  • The other three Schuko outlets provide surge protection only. Check that your NAS recognises the UPS and that its runtime suits your load.

APC by Schneider Electric

The APC Back-UPS BX950MI-GR is a Schuko model with automatic voltage regulation (AVR) and four battery-backed outlets.

  • Schneider Electric lists this model as CE-certified.
  • Schneider Electric lists 31 December 2026 as the end-of-sale date and 31 December 2028 as the end of standard service. These dates apply to the BX950MI-GR, not all APC UPSs.

CyberPower

European model information describes the VP700ELCD and CP900EPFCLCD as line-interactive models with AVR and Schuko outlets.

  • CyberPower lists the CP900EPFCLCD as having a pure sine wave output and being suitable for power supplies with active PFC. The manufacturer lists a simulated sine wave output for the VP700ELCD.
  • The active PFC claim applies to the CP900EPFCLCD and not automatically to the VP700ELCD. Check NAS compatibility and the exact model.

Joybuy products

Related products will be available soon.

Frequently asked questions

How do I set up the UPS after connecting it to my NAS?

If you have a supported USB UPS, connect the communication cable to your NAS and enable UPS support. Then set the time before switching to safe mode or choose what happens when the battery is nearly empty. The available options vary by NAS software. Synology describes unmounting volumes in standby mode; QNAP offers options including shutdown and auto-protection.

Will my internet keep working if only my NAS is connected to a UPS?

No. You’ll also need to connect the necessary network devices to battery-backed outlets. The combined load must stay within the UPS’s capacity and provide the runtime you need. An outlet with surge protection only won’t supply power during an outage.

Can I report a faulty UPS to the seller after the manufacturer’s warranty has expired?

Yes. You can contact the seller if a product breaks sooner than you could reasonably expect. According to Dutch government information, the end of a manufacturer’s warranty period does not, by itself, mean your statutory rights have ended. The outcome depends on the circumstances of your case.

Is CE marking compulsory for a UPS in the Netherlands?

Yes. According to the Netherlands Food and Consumer Product Safety Authority, CE marking is compulsory for electrical products. Check the marking on the exact model being offered; a listing for a similar model doesn’t confirm that yours carries it.

What should I do with a discarded UPS or battery?

Recycle a discarded UPS separately as electrical equipment. Milieu Centraal explains that you can return an old, similar appliance free of charge when you buy a new one of the same type. For a separate battery, check which collection point accepts it.