Who needs a UPS for a NAS?

NAS users who want to shut down safely

You want your NAS to detect a power cut and shut down safely. Check that your NAS and UPS model can communicate, then configure how the NAS should respond to a power cut. Synology and QNAP explain how to set up a UPS with their NAS systems.

Users who also want to power their network equipment

If you also need a router or switch to keep running during a power cut, add their power draw to that of your NAS. Synology recommends checking the UPS’s total wattage and available runtime.

Users with limited desk space

You’ll need somewhere to put the UPS and a way to plug in your devices. Compare the dimensions and connections of the exact model, and check which outlets provide battery backup.

What should you look for?

First, decide which devices need to keep running during a power cut. Then check whether your NAS can communicate with the UPS and whether the runtime is suitable for the combined load.

What to consider What should you check? Who is this important for?
Automatic safe shutdown Check that your NAS and UPS are compatible, that they can communicate and that the shutdown settings are correct. Test everything after installation. If I want my NAS to shut down safely in good time during a power cut, communication must work with my model. Around 36% of consumers say automatic safe shutdown is their top priority.
Runtime for your NAS and network Add up the wattage of all devices connected to battery-backed outlets, then check the runtime for a similar load. If I also need my router or switch during a power cut, I want the UPS to power them alongside my NAS for long enough. Around 29% of consumers prioritise this combined runtime.
Space and connections Compare the dimensions and plug types for the exact model. Count the battery-backed outlets separately. If I have limited desk space, the UPS and my plugs need to fit in a practical way. Around 21% of consumers say placement and suitable connections matter most.
Voltage regulation Check whether the model specifies AVR, what waveform it provides on battery power and whether that’s suitable for your equipment. If voltage fluctuations as well as power cuts are my main concern, I compare models with AVR. Around 14% of consumers say voltage regulation is their top priority.

Common mistakes when choosing

  • Assuming every outlet provides battery backup

    Some outlets only offer surge protection. A device plugged into one of these won’t receive battery power during a power cut.

    Before connecting your NAS and network equipment, check the labelling and number of battery-backed outlets on the exact model.

  • Taking the VA rating as an indication of runtime

    A VA rating doesn’t tell you how long the UPS can power your NAS and any network equipment.

    Calculate the combined power draw in watts and check the runtime figures for a load similar to your setup. Synology also recommends checking the battery capacity and available runtime.

  • Assuming a USB port means the UPS is compatible with your NAS

    The presence of a USB connection doesn’t prove that the UPS will work with your NAS model.

    Check the compatibility information for your equipment, configure how it should respond to a power cut and test it after installation.

  • Confusing a model name with that of its successor

    Product variants and model ranges can differ. Schneider Electric lists the BX950MI-GR and says it will stop selling it on 31 December 2026; the company names the BXR950MI-GR as its successor.

    Compare the full model number and check the product status and battery information for the version you’re considering.

Brands and models to consider

Eaton

Eaton describes the 3S Gen2 as an offline UPS range for homes and small businesses.

  • Eaton specifies 700 VA/420 W, USB communication and eight Schuko outlets for the 3S700D. Four outlets provide battery backup.
  • The other four outlets offer surge protection only. USB communication alone doesn’t confirm compatibility with every NAS model.

CyberPower

The VP700ELCD is a line-interactive model with AVR and a status display.

  • CyberPower specifies 700 VA/390 W, four Schuko outlets, USB communication and a simulated sine wave.
  • These specifications don’t tell you the runtime for your load or whether the model is compatible with a particular NAS.

PowerWalker

The VI 850 SHL is a line-interactive model with AVR, HID USB and a display.

  • BlueWalker specifies 850 VA/480 W and dimensions of 290 × 100 × 143 mm for this model.
  • The manufacturer quotes six minutes at half load; this isn’t a guaranteed runtime for your NAS. Also check that you choose the right connection variant.

APC

The Back-UPS BX950MI-GR is a Schuko version with AVR.

  • Schneider Electric lists four Schuko outlets for this model.
  • Schneider Electric says it will stop selling the model on 31 December 2026 and names the BXR950MI-GR as its successor. Check whether the BX950MI-GR communicates with your NAS.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Is a UPS with a USB port automatically compatible with my NAS?

No. Check the compatibility of the exact NAS and UPS models. Synology recommends checking the compatibility information and testing the shutdown function after installation. You should also configure how your NAS responds to a power cut.

How do I set up a UPS with a QNAP NAS?

Follow the instructions for your version of QTS and check that the UPS is supported. For QTS 5.0.x, QNAP explains how to connect a USB UPS and choose how to respond to a power cut, such as shutting down or switching to auto-protection mode.

Is the VA rating enough to work out the battery runtime?

No. Add up the wattage of the devices connected to battery-backed outlets, then check the UPS’s battery capacity and runtime figures. A runtime quoted for a different load won’t necessarily apply to your setup.

Where can I dispose of a worn-out UPS or replacement battery in the Netherlands?

According to the Dutch government, batteries must not go in general waste. Local collection points are available for discarded household electrical appliances. For batteries, the government distinguishes between standard batteries and other types, including industrial batteries. Check which collection point accepts your standalone UPS battery.

Can I replace a UPS battery later?

That depends on the model. Eaton says the 3S700D has a user-replaceable battery. Check which replacement battery is suitable for your exact version and follow the instructions provided.