What should you look for when choosing one?
First, decide which devices need backup power and how long they need to keep running. Then check the conditions in the intended location and whether you need automatic shutdown or a particular waveform.
| What to consider |
What should you check? |
Who is this important for? |
| Runtime at your actual load |
Add up the wattage of the devices that need to stay on and compare the runtime at that load. Check the wattage as well as the VA rating. |
I want enough time to save my work before my computer shuts down; around 31% of consumers prioritise runtime above all else. |
| Conditions in your garden office |
Compare the temperature and potential condensation at the location with the conditions specified for the exact model. BlueWalker specifies the PowerWalker VI 850 SHL for 0–40 °C and non-condensing humidity. |
If my workspace could get cold, hot or damp, I want to know whether the UPS can be kept there; around 25% of consumers prioritise the conditions in the intended location. |
| Controlled shutdown |
Check whether the model supports communication and whether it works with your computer and software. Test the shutdown settings; communication won’t automatically save an open file. |
If I can’t always be there when an outage happens, I want my computer to be able to shut down safely; around 19% of consumers prioritise automatic shutdown above all else. |
| Battery-backed outlets |
Check the number and type of outlets and which ones are battery-backed. Make sure they match the plugs on the devices you want to keep running. |
I want the essential devices plugged into suitable backup power outlets; around 13% of consumers prioritise connections above all else. |
| Waveform on battery power |
Check which waveform the model supplies and whether your equipment’s power supply requires a particular one. BlueWalker specifies a simulated sine wave for the PowerWalker VI 850 SHL; CyberPower specifies a pure sine wave for the CP900EPFCLCD. |
If my equipment’s power supply requires a particular waveform, I want to check compatibility in advance; around 12% of consumers prioritise power supply compatibility above all else. |
Joybuy products
Related products coming soon.
Frequently asked questions
Can I tell how many minutes a UPS will last from its 950 VA rating?
No, you also need to know the load. For example, Schneider Electric lists a runtime of 10 min 24 sec at 200 W and 29 sec at 520 W for the APC BX950MI-GR. When choosing a UPS, use the runtime for the power consumption of your setup.
Will a UPS automatically save my open files?
No, backup power isn’t the same as automatic saving. Depending on the model and configuration, USB communication or management software can help with a controlled shutdown. Save your files yourself and test the shutdown settings.
Can I keep a UPS in an unheated garden office?
It depends on the conditions and the exact model. BlueWalker lists an operating temperature of 0–40 °C and non-condensing humidity for the PowerWalker VI 850 SHL; this specification doesn’t confirm that it’s suitable for frost or condensation.
What warranty applies if my UPS breaks prematurely?
If you buy as a consumer, your statutory rights apply alongside any manufacturer’s warranty. ACM ConsuWijzer states that the retailer must offer a suitable solution if a product breaks sooner than you could reasonably expect under normal use; this doesn’t set a fixed warranty period for a UPS.
Is CE marking mandatory for a UPS sold in the Netherlands?
The Netherlands Food and Consumer Product Safety Authority states that CE marking is mandatory for electrical products. Check this for the specific model; CE marking alone says nothing about the runtime you need or whether the UPS is suitable for the conditions in your garden office.