Who is a UPS for a NAS suitable for?

NAS users who want a safe shutdown

You want your NAS to receive a signal during a power cut so it can follow the correct shutdown or protection procedure. Synology and QNAP explain their UPS settings and protection modes; check that they work with your NAS model.

Home workers who also need their network

You want to keep selected network equipment powered alongside your NAS during an outage. Add up the wattage of all your devices and check which outlets provide battery backup.

Users with specific power requirements

Your connected equipment may have specific power requirements when the UPS is running on battery. If so, compare the stated waveform and voltage regulation with the equipment’s specifications.

What should you look for in a UPS for your NAS?

First, check that your NAS can communicate with the UPS and carry out an appropriate action during a power cut. Then calculate the combined load and decide which other devices need power during an outage.

What to consider What to look for when buying Who is this important for?
Automatic safe shutdown Check that your exact NAS model supports UPS communication and that its response to a power cut is configured. Test that it works in line with the manufacturer’s instructions. If you want your NAS to shut down automatically during a power cut, prioritise reliable communication and configuration; around 40% of consumers put safe shutdown first.
Power capacity and runtime Add up the wattage of all the devices that need battery power. Compare both the wattage limit and the runtime at that combined load. If you want the NAS to stay powered long enough to carry out its chosen shutdown procedure, focus on load and runtime; around 30% of consumers make this their top priority.
Battery backup for network equipment Check how many outlets provide battery backup and whether the plugs will fit. Include the extra power draw of your network equipment when calculating runtime. If you need selected network equipment as well as your NAS during an outage, check the connections and extra load; around 20% of consumers prioritise powering several devices.
Waveform and voltage regulation Check the power requirements of your connected devices and compare them with the stated battery waveform and any AVR function. If you’re connecting equipment with specific battery power requirements, compare those requirements with the UPS specifications; around 10% of consumers say this is their most important consideration.

Common pitfalls

  • Assuming the VA rating or number of sockets guarantees a certain runtime

    VA, the maximum permitted wattage and the runtime at a particular load are different specifications. Some sockets also provide surge protection only, with no battery backup.

    Compare the wattage limit and runtime with the load of your setup. For backup power, count only the battery-backed outlets.

  • Assuming a USB port proves NAS compatibility

    A USB connection alone doesn’t confirm that your NAS will receive a usable power-failure signal or respond to it in time. The correct settings on the NAS are important too.

    Check the documentation for the exact UPS and NAS combination, then test the configured response to a power cut.

  • Assuming waveforms or successor models are identical

    PowerWalker lists a simulated sine wave for the VI 850 SHL, while CyberPower specifies a pure sine wave for the CP900EPFCLCD. Schneider Electric lists a planned phase-out date of 31 December 2026 for the APC BX950MI-GR and names a successor with a different model code.

    Compare your equipment’s power requirements with the full specifications of the exact model variant you’re considering. Don’t assume a successor model has the same configuration or compatibility.

  • Forgetting to factor battery replacement into maintenance

    Available runtime depends in part on the condition of the battery, which can change over time.

    Check whether a replacement battery is available for the exact model, and take a spent battery to an appropriate collection point.

UPS brands to consider

Eaton

The 3S Gen2 range includes compact offline UPS units. The 3S550D is a Schuko model for setups with a modest NAS load.

  • According to Eaton, the 3S550D offers USB-HID, 550 VA and 330 W. Three Schuko outlets provide battery backup.
  • The other three Schuko outlets provide surge protection only. Check the runtime for the load of your setup.

APC by Schneider Electric

The Back-UPS BX950MI-GR is a 230V model with AVR, designed for equipment with compatible connections.

  • Schneider Electric lists 950 VA, AVR and four battery-backed Schuko outlets for this model.
  • Schneider Electric gives 31 December 2026 as the planned phase-out date and lists a successor with a different model code. Check the exact variant.

CyberPower

The CP900EPFCLCD is a line-interactive Schuko model for which CyberPower specifies a pure sine wave.

  • CyberPower lists 900 VA, 540 W and six battery-backed outlets.
  • The seven-minute runtime quoted by CyberPower applies at half load; it doesn’t automatically indicate the runtime for a different NAS setup.

PowerWalker

The VI 850 SHL is a line-interactive model with AVR and Type F outlets.

  • The manufacturer lists 850 VA, 480 W and USB-HID.
  • The manufacturer specifies a simulated sine wave and two Type F outlets. The quoted six minutes at half load won’t necessarily apply to a different load.

UPS products at Joybuy

Related products coming soon.

Frequently asked questions

Is a USB connection enough to shut down my NAS safely and automatically?

No, a USB connection on its own isn’t enough. Check that your exact NAS model supports UPS communication and configure its response to a power cut. Synology provides compatibility information and explains how to test that it works; QNAP explains the UPS settings for the relevant software.

Which devices should I connect to the battery-backed outlets?

Connect the devices that need power during an outage for your intended use, such as your NAS and, if needed, selected network equipment. Distinguish battery-backed outlets from those that provide surge protection only, and include the wattage of all your chosen devices.

When should the battery be replaced, and what should I do with the old one?

Eaton gives a typical lifespan of three to five years for VRLA batteries, depending on conditions, discharge cycles and maintenance; this isn’t a guaranteed lifespan for every UPS. Take a spent battery to an appropriate collection point rather than putting it in general waste.

Does my Dutch statutory guarantee end when the manufacturer’s guarantee expires?

No. According to ACM ConsuWijzer, statutory rights apply in addition to the seller’s or manufacturer’s guarantee. What you can reasonably expect from the product with normal use is one of the factors considered if a fault occurs; the seller is your point of contact.

What product rules apply when selling a UPS in the Netherlands?

A mains-powered UPS that falls within the scope of EU rules for electrical equipment must meet the applicable product requirements, including the required CE marking and EU Declaration of Conformity. The European Commission explains the scope of the Low Voltage Directive, and Business.gov.nl outlines the product requirements. A CE marking alone doesn’t prove battery runtime or compatibility with a NAS.