Who should consider this?

Shared NAS file administrator

Wants the NAS to respond to a power cut without someone having to be in the studio at all times. Check UPS communication and the settings for your specific NAS model; Synology Knowledge Centre recommends testing how it behaves during a power cut.

Studio that also needs network backup

Wants to power the necessary router or switch as well as the NAS during a brief outage. So check the combined power requirement, runtime at that load and the number of battery-backed outlets, as also highlighted in Synology Knowledge Centre's guidance.

Studio with the UPS in the workspace

Needs to consider placement and the stated noise level, as well as technical performance. Manufacturer figures do not tell you how noisy a unit will seem in your own studio; models and connections vary.

What should you look for when buying?

First, check whether the NAS and UPS can communicate, then decide which devices need power during an outage. Next, look at the connections, placement and battery maintenance options.

What to consider What should you check? Who is this important for?
Safe shutdown Check whether the NAS model supports communication with the UPS and whether the shutdown setting works. If I want the NAS to respond to a power cut when nobody is in the studio, a verified safe shutdown is my top priority. Around 36% of consumers prioritise safe NAS shutdown.
Runtime for the NAS and network Add up the power requirements of the devices that need to keep running; check the output power in W and runtime at that load. If the NAS needs to remain accessible during an outage, I also want to power the router and switch. Around 29% of consumers prioritise keeping both the NAS and network running.
Placement and noise Check the dimensions, stated noise level and whether the model has Schuko or IEC connections. If the UPS is going in a shared workspace, I want to know whether it will fit comfortably and which plugs it takes. Around 21% of consumers prioritise placement and noise.
Battery maintenance Check whether the battery in the exact model is replaceable and which replacement battery pack the manufacturer recommends. If I want to keep using the UPS for longer, I want to know in advance how battery replacement works. Around 14% of consumers prioritise battery maintenance when buying.

Common pitfalls

  • Assuming the VA rating guarantees a certain runtime

    The VA rating does not tell you how long the UPS can support the load from your NAS and network equipment. Power in W and runtime at the actual load are separate things to consider.

    Calculate the total power requirement of the connected devices and check the runtime figures for the exact model at the corresponding load.

  • Assuming every outlet provides battery backup

    According to Eaton, one of the four C13 outlets on the Eaton ELP850IEC provides surge protection only. So a router or switch connected to it will not get the same battery backup during a power cut as devices plugged into the battery-backed outlets.

    Check the function of each outlet, and connect the NAS and essential network equipment to battery-backed outlets.

  • Assuming a USB connection means NAS compatibility

    A USB or HID connection on the UPS does not, on its own, prove that your NAS will receive the required notification and shut down safely.

    Check compatibility with your exact NAS model and test the configured response before relying on automatic shutdown. Synology Knowledge Centre recommends testing how it behaves during a power cut.

  • Looking only at the purchase price

    Battery replacement options and the cables you need can vary between UPS models.

    Check which battery pack goes with the exact model and whether your existing plugs and cables will fit.

Brands to compare

Eaton

The Ellipse PRO ELP850IEC is worth looking into if you need a UPS with USB communication and IEC connections.

  • Eaton specifies 850 VA, 510 W, an HID-compatible USB port and three battery-backed C13 outlets for the ELP850IEC.
  • The fourth C13 outlet provides surge protection only. Check that your cables fit and that your NAS recognises this UPS; the stated specifications do not confirm runtime for your load.

APC

The BX950MI-GR is a Schuko-focused Back-UPS model for providing temporary power to equipment.

  • Schneider Electric lists four battery-backed Schuko outlets and AVR for this model.
  • This does not confirm automatic communication with your NAS. Schneider Electric lists a planned phase-out date of 31 December 2026 for this model.

CyberPower

The CP900EPFCLCD is a Schuko model to consider if you need a pure sine wave output when running on battery.

  • CyberPower specifies 900 VA, 540 W, six battery-backed Schuko outlets and a pure sine wave output on battery. The product specifications also list a USB port and a replacement battery pack.
  • These manufacturer specifications do not amount to a compatibility test with your NAS or guarantee runtime for your connected devices.

PowerWalker

The VI 850 SHL is a line-interactive model with USB communication and Type F outlets.

  • BlueWalker lists 850 VA, 480 W, two Type F outlets and a simulated sine wave.
  • The stated six minutes at half load is not a runtime guarantee for your devices. Also check whether your NAS recognises this specific model.

Related products

Related products coming soon.

Frequently asked questions

Does my NAS need to communicate directly with the UPS?

If your NAS needs to respond automatically to a power cut, check whether your exact NAS model supports a communication link with the UPS. Synology says a UPS connected via USB can be configured in DSM and recommends testing the power-failure function; a USB port alone does not confirm support for your specific NAS.

How do I work out how much backup time I need?

Add up the power requirements of all the devices that need battery backup, then compare this with the output power and runtime figures for the exact UPS at that load. Set the NAS response so there is enough time for a safe shutdown; the VA rating alone will not tell you the runtime.

How do I dispose of a flat UPS battery or an old UPS?

According to the Dutch government, flat batteries must not go in the bin; check the correct disposal route for your specific UPS battery. The disposal route for an old electrical appliance also depends on whether it was bought privately or for business use: the take-back scheme mentioned applies to private customers, not businesses.

Is a CE mark enough to know whether a UPS is suitable for my NAS?

No. For applicable electrical equipment sold on the Dutch market, the relevant product requirements, including CE marking and an EU declaration of conformity, form part of the assessment of the specific model; Business.gov.nl explains these requirements. A CE mark does not confirm that the UPS communicates with your NAS or will run for long enough with your connected devices.