For shared use by left- and right-handed colleagues, opt for a symmetrical trackball; for a single right-handed user, a thumb-operated trackball with quiet clicks may be a better fit. First, test whether the middle click or assigned button actually pans in your CAD programme: a scroll ring or extra buttons don’t guarantee that it will. Then check the connection and fit. A trackball is no substitute for a well-set-up workspace or varying your tasks and posture.
Who is a trackball suitable for?
CAD designers who pan frequently
If you regularly navigate around drawings, it helps to have an easily accessible pan action alongside zooming and pointing. Autodesk Support explains which settings to check if panning with the middle button doesn’t work in AutoCAD; this advice doesn’t automatically apply to other CAD programmes.
Colleagues sharing a workspace
If several colleagues with different hand preferences use the same device, it may be worth comparing symmetrical models. Kensington describes symmetrical Orbit models with wired and wireless connection options.
Designers in a quiet office
As well as cursor control, click noise and your posture at the desk may be important. Logitech lists quiet clicks for the ERGO M575S and MX Ergo S; Arboportaal also highlights repetitive actions and a static posture when working with screens.
What should you look for when choosing one?
Start by testing the pan action in your CAD programme. Then decide whether colleagues with different hand preferences need to use it, before checking fit, noise and connectivity.
| What to consider |
What to look for |
Who it matters to |
| Panning, zooming and pointing |
Test the middle click or button assignment in your own CAD programme. Autodesk Support recommends checking MBUTTONPAN=1 if you’re having trouble panning in AutoCAD. |
If I need to pan frequently while drawing, I want the controls to work in my own software. Around 31% of consumers prioritise CAD controls. |
| Use by colleagues |
Check that the ball and buttons work for the colleagues sharing the device; if necessary, compare a symmetrical design with a thumb-operated trackball. |
In a shared workspace, I don’t want the controls to suit just one hand preference. Around 25% of consumers prioritise use by colleagues with different hand preferences. |
| Working posture |
Try the hand position at your own workstation and vary your tasks or posture. Arboportaal describes repetitive actions and static strain when working with screens. |
If I draw for long periods, I want a posture and setup that suit my workspace. Around 19% of consumers put fit and working posture first. |
| Click noise |
Compare the noise made by the buttons you use most often; Logitech lists quiet clicks for the ERGO M575S and MX Ergo S. |
In a quiet room, I want to minimise the disturbance caused by frequently used clicks. Around 13% of consumers choose click noise as their main consideration. |
| Space and connectivity |
Check the available space, ports and permitted connection methods; wired USB, Bluetooth and a receiver each require different connection options. |
If I share a workspace, I want to know whether the device and connection will fit without cables or ports getting in the way. Around 12% of consumers prioritise space and connectivity. |
Common buying mistakes
-
Assuming a scroll ring guarantees a CAD middle click
A scroll ring isn’t automatically a pressable middle button. Autodesk Support lists settings that can affect panning with the middle button in AutoCAD.
Test the pan action in your CAD programme and the configuration you actually use.
-
Choosing a right-handed thumb trackball for a shared workspace
A design made for right-handed thumb control won’t necessarily suit a left-handed colleague.
Ask everyone who’ll be using it to try the hand position, and compare a symmetrical model if users have different hand preferences.
-
Treating ergonomic claims as a guarantee against discomfort
A trackball doesn’t automatically eliminate repetitive actions or a static posture. Arboportaal highlights these considerations when working with screens.
Check the fit at your own workstation and vary your posture and tasks.
-
Expecting a consumer cooling-off period on a business order
According to Ondernemersplein, the statutory 14-day cooling-off period doesn’t apply when a business makes a purchase for commercial purposes.
Before ordering, check whether the purchase is being made privately or for business, and which returns policy applies.
Brands to compare
Kensington
Kensington’s symmetrical Orbit models are worth comparing if colleagues with different hand preferences share a trackball.
- Kensington says the wired Orbit K72337EU has a scroll ring and two customisable buttons; the Orbit Wireless offers Bluetooth and a receiver.
- A scroll ring or button setting doesn’t prove that panning will work in your CAD setup. Test the action in the software you use.
Logitech
The ERGO M575S and MX Ergo S are thumb-operated trackballs for anyone considering right-handed controls and looking for quiet clicks.
- Logitech lists a tilt position, six customisable buttons and USB-C charging for the MX Ergo S.
- A USB-C charging cable isn’t included with the MX Ergo S. The manufacturer’s claims about comfort and noise reduction aren’t based on independent CAD testing.
Perixx
The PERIMICE-517 is a wired USB-A thumb-operated trackball for right-handed use.
- Perixx specifies two DPI settings and quiet clicks.
- The design is for right-handed use, so it won’t necessarily offer the same controls for left-handed colleagues. Test the pan action separately in your CAD programme.
ELECOM
The wired M-HT1UR is a finger-operated alternative to compare if you’re looking for a different button layout.
- ELECOM’s manual describes a USB connection and how to remove dust from the ball’s support points.
- For the version you choose, check the connection, button assignment in your CAD programme and fit for the users.
Joybuy products
Related products will be available soon.
Frequently asked questions
Does every scroll ring work as a middle button for panning in CAD?
No. A scroll ring doesn’t automatically let you pan. If you’re having trouble panning in AutoCAD, Autodesk Support recommends checking settings including MBUTTONPAN=1. Test the assigned action in your own version and configuration, and check the controls for other CAD programmes separately.
Do I need to install extra software for a shared work computer?
Not necessarily for every basic function: Kensington describes the wired Orbit as plug-and-play via USB. You may need additional software to customise button assignments; check whether your IT administrator allows software installation and user profiles.
What can I do if the cursor moves jerkily?
Follow the maintenance instructions for your specific model. For the PERIMICE-517, Perixx advises carefully removing dust from the removable ball with a soft brush or lint-free cloth; this advice doesn’t automatically apply to every trackball.
What returns and warranty rights apply when buying for the office?
For a consumer purchase made online, a statutory 14-day cooling-off period applies in many cases; statutory warranty rights cover products that meet reasonable expectations. If a business makes a purchase for commercial purposes, the statutory 14-day consumer cooling-off period doesn’t apply. Before ordering, check the terms that apply to the business purchase.
Does Dutch law require a trackball for CAD screen work?
Buying a trackball doesn’t replace the obligations around safe and healthy screen work. Arboportaal recommends, among other things, alternating with other work or taking a break. You should also consider your workstation setup and how you vary your tasks.