Who should consider this?

Voiceover artist prioritising vocal tone

You’re recording a final trailer voiceover and want to compare a headset microphone with a standalone microphone in the same room, paying attention to breathing sounds and intelligibility. RØDE describes the NTH-100M microphone’s position as helping to reduce plosives; ACX recommends trying microphones in your own recording space for audiobook recordings.

Creator recording directly to a computer

You want to record and monitor your audio without a separate audio interface. The available USB or combined headset connection will help you work out which connection option is right for you; Logitech describes the 960 as a USB-A headset for use with a computer.

Creator with an audio interface

You have, or are considering, a separate microphone input and headphone output, so you’ll need to check both connections. Audio-Technica lists separate microphone and headphone connections for the BPHS1; the beyerdynamic DT 297 PV MK II is supplied without a connection cable.

What should you look for?

Wired USB headset

Best for: recording on a computer with a compatible USB port, without a separate interface.

Consider: Logitech positions the 960 primarily for calls and webinars. Make a test recording before deciding whether its vocal tone is right for a trailer.

Headset with a TRRS connection

Best for: a device with a compatible combined headset connection, so you can record and monitor with one headset.

Consider: RØDE specifies the supplied TRRS cable for the NTH-100M. To use the microphone with an XLR input, RØDE describes using a splitter and an adapter that provides plug-in power.

Broadcast headset with separate connections

Best for: a set-up with a compatible microphone input and a separate headphone output.

Consider: the Audio-Technica BPHS1 has a 3-pin XLR connection for the microphone and a 6.3 mm connection for the headphones; the DT 297 PV MK II is supplied without a connection cable.

Standalone head-worn or studio microphone

Best for: a head-worn microphone if keeping it in a fixed position near your mouth is important and you can already monitor your audio separately. For vocal tone, you could also compare it with a standalone studio microphone.

Consider: the Shure WH20XLR is a microphone, not a complete monitoring headset. ACX recommends trying microphones in your own recording space for audiobook recordings.

Wireless headset system

Best for: a recording set-up where freedom of movement or avoiding a cable is genuinely important.

Consider: frequency requirements for wireless microphones can vary by location. The Netherlands Authority for Digital Infrastructure (RDI) states that a licence is required for some frequency bands.

What to consider What should you check? Who is this important for?
Vocal tone and breathing sounds Position the microphone boom and assess a test recording using the script, room and microphone you plan to use for the trailer. For a final trailer voiceover, I mainly want to assess intelligibility and a suitable vocal tone, including breathing sounds. Around 36% of consumers prioritise vocal tone.
Connection and power Compare your equipment’s ports with the exact cable version, and check whether you need an adapter or power supply. I want to know in advance whether I can connect the microphone and headphones to my computer or interface. Around 29% of consumers prioritise connectivity.
Monitoring and wearing comfort Check whether the product also includes headphones, and whether the cable, fit and earcups suit your recording set-up. When recording while seated, I want to be able to monitor my script and audio without wondering whether I’m buying a complete headset. Around 21% of consumers prioritise monitoring and fit.
Ease of set-up Make a note of the connections, cables, adapters and recording equipment you already have. If I want to get started without extra equipment, I weigh up a direct computer connection against the connection options offered by an interface. Around 14% of consumers put ease of set-up first.

Things to watch out for when buying

  • Assuming a compatible plug means full compatibility

    According to RØDE, using the NTH-100M microphone with an XLR input requires a splitter and an adapter that provides plug-in power. The DT 297 PV MK II is supplied without a connection cable.

    Before choosing, check the exact cable version, microphone input, headphone output and any power requirements against your equipment.

    You may need a splitter or power adapter to complete your chosen connection set-up.

  • Confusing noise reduction for calls with proven trailer sound quality

    Logitech positions the 960 for calls and webinars. That alone doesn’t tell you how your voice will sound in a trailer recording.

    Record a sample in the room you’ll use and assess your voice, breathing sounds and intelligibility.

  • Choosing a head-worn microphone as if it were a complete headset

    The Shure WH20XLR is a head-worn microphone and doesn’t include headphones. You’ll also need a suitable way to monitor your audio while recording.

    Check whether you already have the necessary headphones and recording equipment, and whether they connect to your system.

    To monitor your audio, you’ll need to provide headphones and suitable recording equipment separately from the WH20XLR.

  • Choosing wireless without a clear benefit or checking the frequencies

    Extra freedom of movement isn’t necessarily useful if you’re recording while seated. What’s more, the available frequencies can vary by location.

    Choose wireless only if you have a clear reason to, and check the frequency requirements for your recording location with the RDI.

Brands to consider

Audio-Technica

The BPHS1 is a broadcast headset with closed-back earcups and a dynamic microphone.

  • Audio-Technica states that the microphone boom, cable and earpads are replaceable or adjustable.
  • The BPHS1 requires a 3-pin XLR microphone connection and a 6.3 mm headphone connection. Check the connections on your equipment.

RØDE

The NTH-100M combines over-ear headphones with a detachable microphone for applications including broadcasting and podcasting.

  • RØDE describes the microphone’s position as helping to reduce plosives.
  • RØDE specifies the supplied TRRS cable. When using the microphone with an XLR input, the brand describes a suitable adapter for plug-in power.

Logitech

The 960 is a wired USB-A computer headset that Logitech presents for calls and webinars.

  • The adjustable microphone boom and in-line controls can make the headset easy to operate while in use.
  • A claim about background noise isn’t an independent assessment of vocal tone in a theatre trailer. Make a test recording to judge that for yourself.

Shure

The WH20XLR is a lightweight, dynamic head-worn microphone with a cardioid polar pattern, not a complete monitoring headset.

  • According to the manual, the XLR version can be connected with a cable.
  • You’ll need to provide headphones and suitable recording equipment separately for monitoring.

beyerdynamic

The DT 297 PV MK II is a closed-back, wired broadcast headset with a condenser microphone.

  • According to beyerdynamic, the microphone boom can be rotated and adjusted.
  • DT 297 versions are supplied without a connection cable, so choose a cable that matches your equipment.

Headsets at Joybuy

This selection includes wired gaming and business headsets with microphones. Use these models as options for comparing connectivity and monitoring. Product descriptions for calls or gaming don’t, by themselves, prove that a headset will deliver the vocal tone you want for a final trailer.

AOC wired gaming headset with microphone

AOC Wired Gaming Headset for PS5, Xbox Series X|S & Xbox One, PC, Clear Mic

A wired headset with a microphone to consider if you also want to listen through a headset while recording.

The description mentions a flexible microphone and a 3.5 mm connection. The product name lists PS5, Xbox Series X|S, Xbox One and PC.

View at Joybuy
Jabra Evolve2 55 Link380a MS Stereo headset

Jabra Evolve2 55 Link380a MS Stereo

This stereo headset is worth comparing if you’re looking for a headset for computer use and audio monitoring.

The product information lists Bluetooth 5.2, ANC and an included Link380a adapter. The stated voice clarity for calls isn’t an assessment of a trailer recording.

View at Joybuy
Jabra Evolve2 75 headset

Jabra Evolve2 75 Headset

A wireless headset to compare if you want to try a microphone and headphones in one product.

The product information lists Bluetooth, eight microphones, beamforming for calls and a USB-A to USB-C cable. These call-related specifications don’t predict how your voice will sound in a trailer.

View at Joybuy
Jabra Evolve2 75 USB-A MS Teams Black headset

Jabra Evolve2 75 USB-A MS Teams Black

This version is worth comparing if you’re looking for a headset for computer use and audio monitoring.

The product information lists Bluetooth, beamforming and a USB-A to USB-C cable. Check that the connection and cable suit your recording set-up.

View at Joybuy
Jabra Evolve2 65 USB-A Black MS Mono headset

Jabra Evolve2 65 USB-A Black MS Mono

A mono headset to consider if you want to keep one ear free while using it; decide whether that suits the way you monitor your recording.

The product information lists a three-microphone system and a USB-A Bluetooth adapter.

View at Joybuy

Frequently asked questions

Is a gaming or meeting headset automatically suitable for a final trailer voiceover?

No. Being designed for calls doesn’t prove that the vocal tone will suit your trailer. Record a sample in the room you’ll use and assess intelligibility and breathing sounds; if possible, compare it with a standalone microphone. ACX recommends trying microphones in your own recording space for audiobook recordings.

How do I connect a headset to an audio interface?

It depends on the model and the connections on your interface. The Audio-Technica BPHS1 uses separate 3-pin XLR and 6.3 mm connections. For the RØDE NTH-100M with an XLR microphone input, RØDE describes using a splitter and an adapter that provides plug-in power, so check the power requirements too.

Can I use any wireless headset microphone in the Netherlands without a licence?

No, that doesn’t apply to every frequency band. The RDI states that some bands require a licence and that you must use the correct frequencies. Check the frequency of the specific system and the requirements for your recording location with the RDI.

What should I check about cables, adapters and the guarantee?

Before buying, check which connection cable, splitter or power adapter you need for your equipment; the beyerdynamic DT 297 PV MK II is supplied without a connection cable. For a consumer purchase in the Netherlands, your statutory guarantee applies alongside any manufacturer’s guarantee. ACM ConsuWijzer states that if a product develops a fault through normal use sooner than could reasonably be expected, the seller must put it right free of charge.