Who is this for?

Mixer with limited access to power sockets

You mix existing theatre audio on a computer and want to use your interface without an extra mains adapter. Check not only whether the model is USB-powered, but also how much power your computer’s USB port can supply. Focusrite and Audient list specific power requirements for different models.

Creator who needs separate audio routes

You want to send a separate signal to a mixing desk or another listening destination, for example, as well as your usual stereo listening route. The number of physical line outputs and the routing options determine whether this will work with your setup.

Live playback technician

You also use the soundtrack during performances and are weighing up extra outputs or a redundant setup against the power supply and equipment required. iConnectivity describes the PlayAUDIO1U as a live playback solution for two computers; the device has an IEC mains power connection.

What should you look for?

One stereo listening route

A good fit if: you’re mixing existing soundtrack files and don’t need to send a separate signal to a second destination.

Trade-off: the Scarlett 2i2 4th Gen has two line outputs, so there’s no second separate stereo output pair. Focusrite specifies 900 mA via the USB data port.

Multiple line outputs

A good fit if: you want to send a separate signal as well as monitor in stereo. According to their manufacturers, the MOTU M4, Scarlett 4i4 4th Gen and Audient iD14 MKII each have four line outputs.

Trade-off: four connections won’t automatically give you the routing you need. Check the USB power requirements and your software settings too.

Redundant live playback

A good fit if: switching between two computers during a performance is part of your setup.

Trade-off: iConnectivity lists an IEC mains power connection for the PlayAUDIO1U, so this setup needs a mains socket and a suitably configured second computer.

What to consider What should you check? Who should pay particular attention?
Power without an extra mains socket Compare the USB power requirement for the exact model with your computer port and cable. Focusrite specifies 900 mA for the Scarlett 2i2 4th Gen. For the Scarlett 4i4 4th Gen, Focusrite specifies 1.5 A via the USB data port, with a separate power option if the computer can’t supply enough. I don’t want to use a mains adapter and can check the available USB port; around 36% of consumers make powering a device without an extra mains socket their top priority.
Separate outputs Map out the signal routes you need, then check the number of physical line outputs, the connection type and the routing available in the interface and software. I want to send a separate signal to a mixing desk, for example, as well as my stereo mix; around 29% of consumers prioritise separate audio routes.
Monitoring Check the headphone connection and volume controls, and which physical outputs are controlled by the main volume knob. According to Focusrite, the Scarlett 4i4 4th Gen has a separate headphone control; the MOTU M4’s manufacturer lists a display with input and output meters. I want to monitor my headphones, speakers and signal levels clearly while mixing; around 21% of consumers make monitoring their top priority.
Live playback continuity Decide whether live playback is part of your job. If it is, check the computers, outputs and power connections required. iConnectivity describes the PlayAUDIO1U’s switching function for a two-computer setup. I also use the soundtrack during performances and want to assess a suitable redundant setup; around 14% of consumers prioritise continuity during live playback.

Common points to consider

  • ‘USB-powered’ doesn’t mean every computer port will be enough

    Power requirements vary by model. Focusrite says the Scarlett 4i4 4th Gen has a separate power connection for when the computer can’t supply enough USB power.

    Compare the model’s specifications with the USB port and cable you’ll actually use, and test your complete setup, including your headphones.

    If there isn’t enough USB power, a suitable external power supply may mean you need an extra power source and mains socket.

  • Four outputs don’t automatically give you four properly configured routes

    The number of connections doesn’t tell you which signal will go to which destination, or which volume control will affect it.

    Plan your signal routes in advance and check the settings on your interface, software and receiving equipment.

    Setup may require extra configuration time and suitable cables.

  • Choosing a live redundancy solution to save on mains sockets

    According to iConnectivity, the PlayAUDIO1U is designed for live playback and has an IEC mains power connection.

    Choose this setup only if live continuity is genuinely part of the job and you can arrange the required power supply and second computer.

    A two-computer setup requires additional equipment as well as mains power.

  • Treating an older PlayAUDIO12 listing as a current model

    iConnectivity says the PlayAUDIO12 has been discontinued.

    If you come across older recommendations or second-hand listings, check the exact model name and whether the manufacturer still supports it.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is an option for one stereo listening route, while the Scarlett 4i4 4th Gen offers four line outputs for more routes.

  • According to Focusrite, both models can be powered via USB.
  • The 4i4 4th Gen draws more power via the USB data port and may need an external power supply if the computer can’t provide enough; the 2i2 doesn’t have a second pair of line outputs.

MOTU

The M4 combines USB bus power with four balanced TRS line outputs for anyone who needs extra analogue routes.

  • The manufacturer specifies four balanced TRS line outputs and USB bus power.
  • Check compatibility with your operating system and the routing options in your own software.

Audient

The iD14 MKII offers four line outputs and two headphone outputs, provided your computer meets the specified power requirement.

  • Audient specifies four line outputs and two headphone outputs for the iD14 MKII.
  • According to Audient, full bus power requires a USB 3.0 connection that supplies at least 900 mA; make sure you’re checking the MKII specifications.

iConnectivity

According to iConnectivity, the PlayAUDIO1U is designed for live playback with multiple outputs and two computers, rather than primarily for a simple desktop mixing setup.

  • The manufacturer describes twelve XLR outputs and redundant switching.
  • The device has an IEC mains power connection. The switching and reliability claims aren’t based on independent test results.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do I need extra microphone inputs for existing soundtrack files?

Not for the existing files themselves. Choose your inputs based on anything else you want to record at the same time, and your outputs based on the listening and playback routes you need.

Can a USB-powered interface still need a separate power supply?

Yes, depending on the model and computer port. Focusrite says the Scarlett 4i4 4th Gen has a separate power connection for when the computer can’t supply the required USB power. Check the port and test your complete setup before use.

How do I connect the Scarlett 4i4 4th Gen to a mixing desk?

Use the line outputs to connect to line-level inputs on equipment such as a mixing desk. Where possible, Focusrite recommends TRS cables for balanced connections. Also check the mixing desk’s input and set up the output routing you need in your software.

Do I need a live playback interface to mix a soundtrack afterwards?

Not necessarily. An interface with one stereo listening route may be enough to mix existing files if you don’t need separate live outputs. According to iConnectivity, a redundant solution such as the PlayAUDIO1U is designed for live playback with two computers and needs an IEC mains power connection.

Does buying an audio interface give me permission to use music in a performance?

No. According to the Dutch Government, you may only use other people’s copyrighted music with permission. BumaStemra provides information about using music in theatres. For the specific performance and music, check which rights have already been arranged.