Mixing in stereo on headphones
You’re editing existing theatre tracks and usually listen without speakers. Focus on a suitable headphone output and computer compatibility rather than a large number of recording inputs.
When mixing existing theatre tracks in stereo, a suitable headphone output, adjustable listening volume and computer compatibility matter more than extra microphone inputs. Choose more physical outputs if you need separate listening routes or multichannel playback, and check that both the interface and your DAW support the routing you want. Manufacturer specifications describe connections, but they cannot predict how a mix will sound in your room.
You’re editing existing theatre tracks and usually listen without speakers. Focus on a suitable headphone output and computer compatibility rather than a large number of recording inputs.
You want to send your stereo mix to monitors or other equipment as well. Check which signals you can route independently.
You’re recording vocals or instruments yourself, or your theatre project requires separate physical playback channels. Count inputs and outputs separately to make sure you have what you need.
Start with the project’s playback and delivery format. Then work out which listening routes and recording inputs you actually need.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Stereo listening | Check the headphone socket, volume control and computer support. The WHO identifies both sound level and listening duration as factors in hearing risk. | If I mainly mix existing tracks on headphones, I want to be able to listen comfortably and keep the volume under control; around 39% of consumers prioritise stereo listening. |
| Extra listening routes | Count the physical line outputs, then check DAW channel assignment and the headphone mix separately. | If you also want to send the mix to monitors or other equipment, you’ll benefit from having the right outputs and routing; around 31% of consumers prioritise extra listening routes. |
| Recording your own audio | Count microphone preamps and other input types separately, based on how many sources you’ll record at once. | If I’m adding vocals or instruments myself, I want enough suitable inputs for those sources; around 15% of consumers prioritise recording inputs. |
| Multichannel playback | Find out which delivery format is required, then check the number of simultaneous physical outputs and how the channels are assigned. | If my project requires separate physical channels, the interface, DAW and playback equipment must all support them; around 15% of consumers focus primarily on multichannel playback. |
The Scarlett 4i4 4th Generation and MOTU M4 each have two microphone inputs, alongside other input types. So the total number of connections doesn’t tell you how many microphones you can connect at once.
Before your recording session, count how many sources you’ll be connecting at the same time for each input type.
If you want to use more microphones at once, you may need additional recording equipment.
The number of physical connections alone doesn’t tell you which signals you can route independently through the DAW or to your headphones. According to MOTU, the RCA outputs on the MOTU M4 mirror the analogue outputs.
Map out the signal routes you want, then check the physical outputs and assignments for each model.
If the routing you need isn’t supported, you may need a different routing solution.
The Scarlett 18i20 4th Generation has ten line outputs, but that doesn’t mean your theatre setup needs physical multichannel playback.
First confirm whether the project requires stereo, separate physical channels or another delivery format.
With stereo delivery, some outputs may go unused; physical playback may require additional equipment.
The Steinberg UR22C’s listed 32-bit/192 kHz specification doesn’t, by itself, determine your listening setup or mixing decisions.
Choose based first on the listening routes, connections and computer compatibility you need.
The Scarlett 4i4 4th Generation is worth considering for desktop setups that need extra listening routes; the Scarlett 18i20 4th Generation is suited to setups with more line outputs or microphone inputs.
The M4 is a desktop interface for anyone who wants four balanced TRS line outputs as well as a headphone output.
The UR22C is a compact 2-in/2-out option for stereo playback and modest recording needs.
The iD14 MKII is worth considering if headphone specifications and recording that can be expanded digitally are important to you.
No, not to play back existing tracks. Choose inputs based on the sources you want to record yourself at the same time, and count microphone preamps separately from other line inputs.
Start with the headphone volume low and check that your computer and interface are connected in line with their connection and power requirements. The WHO advises keeping sound levels down and taking listening breaks, as both volume and listening duration matter.
For online purchases by consumers, the statutory cooling-off period is generally 14 days from delivery. ACM ConsuWijzer lists some exceptions, so check which conditions apply to your specific purchase.
Check whether you already have the cables you need for your setup, and read the terms of any additional warranty. According to the Dutch government, the retailer is your point of contact if a product develops a problem; there is no fixed statutory warranty period in the Netherlands.