Who is this choice relevant to?

Theatre-maker using two projectors

Wants to send soundtracks and video cues to two separate screens. Figure 53 describes video output in QLab as a separate route to displays or projectors.

Sound designer with separate audio routes

Wants to send separate signals to destinations such as the auditorium or another output, in addition to the desk mix. QLab documentation explains how audio cues are routed to the outputs of the selected audio device via patches.

Technician with a playback backup plan

Needs to decide whether additional audio routing is enough or whether a second computer is needed for redundant playback. iConnectivity describes a setup with two computers running identically configured sessions; RME describes the routing options available on the Babyface Pro FS.

What should you look for when choosing?

First decide which signals need to go to the screens and which need to go to audio equipment. Then choose an interface with the audio routing you need.

Key consideration What should you check? Who should prioritise this?
Two screens and video cues Decide whether the screens will show separate projections, then check the video output supported by your computer and software. For QLab 5, Figure 53 limits output to one video device without a video licence. If both projections need to show separate cues, I want to know first whether my computer and software can handle those video routes. That’s why around 36% of consumers with this setup prioritise two video routes.
Separate outputs for the performance List the signals you need and compare them with the physical line outputs and routing available on the exact model. According to their manufacturers, the Focusrite Scarlett 4i4 4th Gen and MOTU M4 each have four physical line outputs. If you need to send separate signals to the auditorium and another destination, for example, check that your software can control each route independently. Around 29% of consumers give separate audio routes top priority.
Monitoring a stereo mix Check which headphone and line outputs are available, and whether you can send the mix you want to each destination. Focusrite says the Scarlett 4i4 4th Gen has separate mixes for its headphone and line outputs. If I mainly want to monitor and check one stereo mix, I don’t automatically need extra outputs for cues or the auditorium. Around 21% of consumers focus on stereo monitoring.
Reliable live playback Distinguish between routing on one computer and a backup using a second computer. If you need redundant playback, test the complete changeover. If you need a backup playback route during the performance, a plan involving two computers with identically configured sessions is worth considering. Around 14% of consumers put reliability first.

Pitfalls to avoid

  • Buying more audio outputs to enable a second projection

    Audio outputs aren’t video outputs. An interface with more line outputs won’t, by itself, overcome a limitation of your computer or video software.

    First check what needs to appear on each screen and what video output is required. Then choose an audio interface to suit your audio setup.

    The computer, video or software you need remains a separate part of your setup.

  • Counting connections without checking whether they carry independent signals

    According to MOTU, the RCA outputs on the MOTU M4 are mirrored. They don’t count as four additional independent analogue outputs.

    Compare the number of separate signals you need with the model specifications and your software’s routing options.

  • Assuming an advanced interface is a complete show backup

    Routing options on one computer don’t automatically mean playback can switch to a second computer.

    Decide separately whether you need just a mixing interface or a redundant playback chain as well. For its PlayAUDIO1U setup, iConnectivity describes two computers running identically configured sessions.

    The backup setup described also requires a second computer and configuration work to keep the sessions in sync.

  • Assuming consumer rights automatically apply to a business purchase for a theatre

    ACM ConsuWijzer distinguishes between purchases made mainly for private use and those made mainly or exclusively for business purposes.

    Before ordering, check whose name the purchase is in and its main purpose. If you’re buying mainly for business, don’t assume consumer protection applies.

Brands to consider

Focusrite

The Scarlett 4i4 4th Gen is worth considering for a compact setup with separate line outputs and a headphone output.

  • Focusrite specifies four balanced analogue line outputs and one headphone output. The manufacturer describes separate mixes for the headphone and line outputs.
  • These audio connections don’t determine how many video screens your computer can drive.

MOTU

The M4 is worth a look if you need four analogue line signals and a compact USB interface.

  • MOTU specifies four balanced TRS line outputs and a stereo headphone output.
  • According to MOTU, the four RCA outputs are mirrored, so don’t count them as additional independent outputs.

RME

The Babyface Pro FS is worth looking into if you need more advanced routing in a compact interface.

  • RME describes TotalMix and digital expansion options for this model.
  • Routing software alone doesn’t prove that a second computer can automatically take over the show.

Audient

The iD14 MKII is an alternative to consider if four line outputs, headphone connections and an optical input suit your setup.

  • Audient lists these connections specifically for the iD14 MKII.
  • Check the exact model version: specifications for the MKII don’t automatically apply to an iD14 with a different designation.

iConnectivity

The PlayAUDIO1U is designed for live playback, with multiple outputs and a setup involving two playback computers.

  • iConnectivity specifies twelve XLR outputs and describes automatic switching as a manufacturer feature. Its documented redundant setup uses two computers running identically configured sessions.
  • The interface doesn’t provide video outputs for two screens.

Related products

Related products coming soon.

Frequently asked questions

Do I connect my two video screens to the audio interface?

No. The interfaces discussed here have audio connections. For two screens, check your computer’s video output and the routing in your video software. If you use QLab 5, Figure 53 limits video output to one device without a video licence.

How do I test the audio and video cues before the performance?

Note which audio output and screen each cue should go to, check the routes in your software, then test them with the equipment connected. In QLab, audio cues use audio patches, while video cues use separate video routes.

Do I need extra licences for QLab 5?

It depends on your setup: Figure 53 specifies a video licence for output to more than one video device and an audio licence for more than the first two audio cue outputs. Check which features your cues and screens actually require.

What rights apply to an online purchase for a theatre in the Netherlands?

For qualifying consumer purchases made at a distance, the Dutch government says you generally have 14 days to change your mind in many cases. ACM ConsuWijzer also explains the seller’s responsibility if a product is faulty, and distinguishes between purchases made mainly for private use and those made mainly or exclusively for business purposes. If you’re buying for business, don’t assume the same consumer protection applies.