Headphone mixer at a shared desk
You mainly create a stereo mix and don’t want to disturb colleagues with monitors. In that case, a suitable headphone output and easy-to-adjust listening level matter more than connections you won’t use.
For a stereo mix that you listen to on headphones only, a suitable headphone output, volume control and computer compatibility matter more than extra outputs you won’t use. If you also need to send separate signals to theatre cues, monitors or other equipment, check both the physical outputs you can use independently and the routing in your software. Keep listening levels under control, and check the mix on the playback system it’s intended for.
You mainly create a stereo mix and don’t want to disturb colleagues with monitors. In that case, a suitable headphone output and easy-to-adjust listening level matter more than connections you won’t use.
You send signals separately to theatre cues, monitors or external equipment. Check both the physical outputs and how they’re assigned in your DAW or cue software.
You mix a soundtrack and may also record vocals or instruments, or want to work with a second listener. The number of inputs you need and whether you can create different headphone mixes will determine which connections matter.
Choose this if: you’re listening to a stereo mix at a shared desk and don’t need to send it to a separate destination.
Trade-off: you avoid paying for connections you won’t use, but won’t automatically have extra outputs if your theatre setup changes later.
Choose this if: you need to send separate signals to monitors or external equipment as well as your headphones.
Trade-off: count only outputs that can be used independently, and check that your software supports the channel assignments you need.
Choose this if: you need multiple headphone mixes, digital expansion or more complex signal paths.
Trade-off: extra channels or a digital input don’t automatically give you extra analogue outputs. Check the full setup and the software you’ll need.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Listening on headphones | Check that the connection and volume control suit your headphones. Also assess the mix on the playback system it’s intended for. | If you mix at a shared desk and don’t want to disturb colleagues with monitors, you’ll want to listen comfortably without turning up the volume to overcome background noise. Around 36% of consumers prioritise quiet, controlled headphone listening. |
| Separate theatre outputs | Map out the signal paths and count the physical outputs you can control independently. Then check the patching in your DAW or cue software. | If cues or other signals need to go to different destinations, you’ll want to know in advance which outputs are genuinely available. Around 29% of consumers prioritise separate theatre outputs. |
| Computer and software compatibility | Check the requirements for your operating system, connection and any drivers. Also make sure your software can assign the outputs you need. | If you want to use your existing computer and software, you’ll want to avoid connection or configuration issues before you buy. Around 21% of consumers prioritise computer and software compatibility. |
| Recording or listening with two people | Make a note of the sources you want to record at the same time and whether a second listener needs the same mix or their own. | If you’re recording sources as well as a soundtrack, or listening with someone else, you’ll want to choose the right inputs and headphone routes in one go. Around 14% of consumers prioritise extra recording or collaboration options. |
On the MOTU M4, the RCA outputs mirror the TRS outputs. So eight analogue sockets don’t mean eight independent routes.
Check how many outputs you can control independently, and see how your software routes the signals.
The number of sockets doesn’t tell you by itself whether two listeners can hear different signals. For the SSL 12, Solid State Logic describes independent headphone mixes via the SSL 12 Mixer.
Check the manual to see whether the model supports simultaneous, separate mixes and what software you’ll need.
The World Health Organization points out that sound level, listening duration and repeated exposure are all linked to the risk of hearing damage.
Keep the volume under control, take listening breaks and don’t try to drown out background noise by turning up the volume.
The Scarlett 4i4 4th Generation is worth considering if you need a separate headphone mix and multiple line outputs.
The M4 is worth considering if you want to assess four specified TRS line outputs and clear level meters.
The iD14 MKII is worth comparing if you want multiple line and headphone outputs, with the option to expand via a digital input.
The SSL 12 is worth considering if you’re working with a second listener or need independent headphone mixes.
The Babyface Pro FS is worth looking into if portability and more advanced digital routing matter to you.
Map each signal that needs to run at the same time to its destination, then check both the interface’s physical outputs and the patching in your software. In QLab 5, the patch matrix routes cues to the outputs of the selected audio device. A high channel count or mirrored sockets doesn’t remove the need to check.
No. QLab 5 also lists a Mac’s built-in speakers or headphone socket as an audio output. An external interface is useful when your setup needs extra connections or separate outputs.
It depends on the model and your operating system. For example, Solid State Logic says the SSL 12 is class-compliant on Mac, while Windows requires an SSL USB Audio ASIO/WDM driver. Check the requirements for your computer and software before buying.
Keep your headphone volume under control, take listening breaks and don’t try to drown out background noise by turning up the volume. According to the World Health Organization, sound level, listening duration and repeated exposure are linked to the risk of hearing damage. An audio interface doesn’t automatically make prolonged or loud listening safe.
The European Commission outlines EMC requirements for electrical and electronic equipment. A CE mark is required only when the applicable harmonised EU rules specify it for the product; it isn’t an independent certification or proof that an interface will work with your theatre software. For a specific listing, check the product identity and applicable conformity information.