Who is this relevant to?

Maker with A1 technical drawings

You want to view dimensions and details on a large sheet. So first work out which paper size and print scale you need.

Maker with limited workspace

You want to print plans at home, but still need space to feed in paper and collect your prints.

Maker with A0 plans

You sometimes need a complete A0 plan and want to weigh up whether a wider printer will fit in your hobby room.

What should you consider when choosing?

First choose between A3, A1 and A0 based on the scale you need for your drawing. This determines whether a standard A3 printer will do or whether you need a large-format printer.

A3 printer

Choose this if: your complete drawing fits on A3 at the scale you want to use.

Bear in mind: A3 cannot replace an A1 or A0 print on a single sheet. An A3 all-in-one can print, scan and copy up to A3; Brother lists these functions for the MFC-J6760DW.

24-inch plotter for A1

Choose this if: A3 is too small, but A1 is large enough. The Canon imagePROGRAF TC-21, HP DesignJet T250 and Epson SureColor SC-T2100 are 24-inch models available in the Netherlands for technical drawings and more.

Bear in mind: paper feed, consumables and placement vary by model. A 24-inch specification doesn’t guarantee that a complete A0 plan will fit on a single sheet.

36-inch plotter for A0

Choose this if: you need to print a complete A0 plan on a single sheet. HP offers the DesignJet T650 2025 Edition as a 36-inch/A0 model.

Bear in mind: allow space for the printer, the paper roll and collecting the print. First consider how often you really need A0.

What to consider What should you check? Who is this important for?
Paper size and scale Work out the smallest usable sheet and check the supported print size and scale settings. Print a test page with a known measurement. If I want to view a plan at the correct scale without needing A0, I check the size and scale first. Around 33% of consumers give this as their main reason for buying.
Placement and paper feed Compare the printer’s dimensions with your workspace and check how roll paper and individual sheets are fed in and collected. In a small hobby room, I want to be able to load paper and collect prints without the printer making my workspace unusable. Around 27% of consumers give limited placement space their highest priority.
Ink, paper and maintenance Check which ink, paper and maintenance parts are needed for the exact model. Compare costs using the same prints of your own. If I print regularly, I want to know in advance which supplies my model needs. Around 20% of consumers prioritise ongoing printing and maintenance costs.
A0 on a single sheet Check explicitly whether the model supports A0 on a single sheet and whether the printer and paper roll will fit in the available space. If a complete plan needs to remain at A0, I look for a model that can handle that size. Around 13% of consumers say A0 on a single sheet is their main requirement.
Scanning paper plans Compare the size of your existing originals with the maximum scan size; print size and scan size are separate specifications. If I want to digitise paper drawings, I check whether the scanner can handle the size of my originals. Around 7% of consumers give scanning as their main reason for buying.

Common mistakes

  • Confusing ‘Fit to paper’ with printing to scale

    A setting that scales the drawing to fit the paper can change the intended plot scale. For an AutoCAD layout, Autodesk recommends, among other things, switching off ‘Fit to paper’ and setting the plot scale to 1:1.

    Check the settings for your CAD workflow and measure a known length on a test print.

    A mis-scaled test or final print means using more paper and ink.

  • Assuming A1 printing means A1 scanning

    Printing and scanning are separate functions. Canon specifies an A4 scanner for the 24-inch imagePROGRAF TC-21M.

    Check the maximum scan size of the exact model and compare it with your paper originals.

    You may need a separate scanning solution for large paper originals.

  • Comparing only the purchase price

    Supplies and maintenance parts vary by model, so your own usage will help determine what to look out for.

    Compare the ink, paper and any maintenance parts for the exact models, using the same prints of your own as a starting point.

  • Looking only at the printer’s dimensions

    You also need practical working space around the printer to load paper and collect prints.

    Measure the spot where the printer will go and allow for paper input and output.

    An awkward set-up could mean moving or adapting your workspace.

Brands to consider

Canon

The imagePROGRAF TC-21 is a 24-inch desktop printer for technical drawings; the TC-21M adds an A4 scanner.

  • Canon specifies roll and sheet feeding for the TC-21, along with dimensions of 968 × 533 × 245 mm.
  • The TC-21M’s A4 scanner is not an A1 scanner.

HP

The DesignJet T250 2025 Edition is a 24-inch/A1 model; the T650 2025 Edition is a 36-inch/A0 model.

  • HP lists individual sheets, roll paper and an automatic horizontal cutter for the T250.
  • HP warns that dynamic security on this T250 model may block cartridges without a compatible HP chip.

Epson

The SureColor SC-T2100 is a 24-inch desktop printer for technical drawings.

  • Epson lists 24-inch roll paper, individual sheets up to A3 and pigment ink.
  • Epson’s claims about ownership costs and avoiding printing errors are manufacturer claims, not an independent comparison with other models.

Brother

The MFC-J6760DW is an A3 all-in-one option if your plans don’t need to be printed larger than A3.

  • Brother lists printing, scanning and copying up to A3.
  • This A3 model is not a proven replacement for a plan that needs to fit on a single A1 or A0 sheet.

Products at Joybuy

Related products coming soon.

Frequently asked questions

How can I stop a technical drawing being printed at the wrong scale without realising?

Check the paper size and drawing units. For an AutoCAD layout, Autodesk recommends setting the plot scale to 1:1 and switching off ‘Fit to paper’. Then check a known measurement on a test print. These steps apply specifically to that AutoCAD workflow.

Can a printer that prints A1 also scan my A1 paper plan?

Not necessarily: print size and scan size are separate specifications. Canon specifies a built-in A4 scanner for the 24-inch imagePROGRAF TC-21M. Check the maximum scan size of the model you’re considering.

What should I consider when placing a printer in a hobby room?

Compare the printer’s dimensions with the available space, and leave room to feed in paper and collect prints. Ventilate the room; the RIVM provides general ventilation advice, not emissions data for these plotters.

What should I do with my old printer when I buy a new one?

For household equipment, the Dutch government describes the ‘old for new’ scheme: when you buy a new, similar appliance, the retailer must take the old one back free of charge. You can also hand it in at a local council facility. The scheme for consumers does not automatically apply to business purchases.