Who is this choice relevant to?

Student with one room that has poor reception

If the study portal mainly stalls at your desk, you’ll want to know whether one well-placed Wi-Fi point will be enough. The Consumentenbond stresses that where you position a booster matters.

Housemates dealing with dead zones in several rooms

If several rooms need coverage, you’ll need to decide together where to place the Wi-Fi points and how to connect them. The Consumentenbond highlights the importance of good positioning.

Student with a network cable available

If you can run a cable to a suitable spot, you can look at devices with access point mode. TP-Link and devolo describe this option for specific models.

What should you consider when choosing?

Wireless repeater

Suitable if: one fixed study spot has poor reception and there’s a place closer to the router where the Wi-Fi signal is usable.

Bear in mind: the repeater depends on the signal it receives itself; an Ethernet port doesn’t automatically mean it connects to the router by cable.

Multiple Wi-Fi points or mesh

Suitable if: housemates need coverage in different rooms or on several floors.

Bear in mind: check that your router supports the mesh feature you want; OneMesh, FRITZ! Mesh and AiMesh aren’t automatically interchangeable.

Wired access point

Suitable if: you can run a network cable from your existing network to a suitable spot near the study room.

Bear in mind: plan the cable route and access to your home network, and check that the device actually has an access point mode.

Compare the connection near your router with the one at your desk before choosing equipment. This will help you work out whether extending your range is the right solution.

Concern What to check before buying Who is this important to?
Coverage at one study spot Check where the repeater can still receive usable Wi-Fi, then test the connection at your desk. If the connection mainly stutters at my usual study spot, I want to know whether one extra point can still get a strong enough signal there. Consumers who prioritise coverage at one study spot make up around 36% of consumers.
Coverage in several rooms Work out how many spots need coverage and check that the Wi-Fi points can communicate properly with each other. If my housemates also need coverage in other rooms, I want us to decide together where to place the points. Consumers who prioritise coverage in several rooms make up around 29% of consumers.
Connection via a network cable Check that a cable can reach the spot you want and that the device has an access point mode. If a cable can reach the extra Wi-Fi point, I don’t want the connection between the router and that point to depend on an intermediate wireless signal. Consumers who prioritise a wired connection make up around 21% of consumers.
Existing router and household arrangements Note down your router model and check which mesh feature it works with and how many points you need. If we want to keep our current router, I want to know which features work with it and agree with my housemates on any extra equipment. Consumers who prioritise compatibility and coordinating around existing equipment make up around 14% of consumers.

Common mistakes

  • Buying a booster before finding out where the problem lies

    Extending your Wi-Fi range won’t fix a slow connection that also affects you near the router.

    Compare the connection near the router with the one at your desk and, if possible, test it using a wired connection before choosing equipment.

  • Placing the repeater where there’s barely any Wi-Fi

    A repeater depends on the connection it receives itself.

    Try a suitable spot closer to the router, then test the connection at your study spot.

  • Assuming every mesh label works with every router

    TP-Link, FRITZ! and ASUS link their specific mesh features to compatible devices within their own systems.

    Note down the exact router model and check for the feature you want. Standard Wi-Fi range extension doesn’t automatically mean that brand-specific mesh features will work.

  • Assuming a stated Wi-Fi speed is the speed you’ll get on the study portal

    A Wi-Fi standard or stated maximum speed doesn’t, on its own, tell you how the connection will perform at your study spot.

    Check the reception and connection where you work. Don’t compare a stated specification directly with a measurement taken at your desk.

Brands to consider

TP-Link

The RE605X is worth considering if you want to cover one extra spot or are looking at a wired access point.

  • TP-Link lists a signal indicator, Gigabit LAN and access point mode for the RE605X.
  • OneMesh requires a compatible OneMesh router; the listed features don’t guarantee coverage at your desk.

FRITZ!

The FRITZ!Repeater 1200 AX is worth looking into if you already have a FRITZ!Box at home.

  • FRITZ! lists Wi-Fi 6, Gigabit LAN and mesh compatibility with a FRITZ!Box.
  • Using it with another router doesn’t automatically mean the same mesh features will be available.

ASUS

The RP-AX58 is worth considering if you want to extend an existing AiMesh router or simply improve your Wi-Fi coverage.

  • ASUS lists AiMesh compatibility with suitable ASUS equipment, as well as compatibility with many other routers.
  • The stated maximum speeds are manufacturer claims under specific conditions, not measurements from your student house.

devolo

The WiFi 6 Repeater 3000 is worth considering if you want to compare wireless repeater mode with a wired access point.

  • devolo lists Gigabit LAN and access point mode for this model.
  • Check mesh features separately; general router compatibility doesn’t automatically confirm that they’re supported.

Joybuy products for home Wi-Fi

This selection includes mesh systems for several areas, along with Wi-Fi repeaters or extenders for one study spot. One device also lists an access point mode. Before buying radio equipment, check that the version actually supplied has the correct CE marking; the Rijksinspectie Digitale Infrastructuur describes this marking as mandatory.

TP-Link Deco BE68 Wi-Fi 7 mesh system, 2-pack

TP-Link Deco BE68 Wi-Fi 7, 2-pack

A two-point mesh system for setting up Wi-Fi coverage in several areas.

The product information lists Wi-Fi 7, multiple WAN/LAN ports on each device, and wired or wireless backhaul.

Joybuy
TP-Link Deco E4 mesh system, 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 dual-band Wi-Fi 5, 3-pack

A three-point mesh system for anyone looking to set up Wi-Fi coverage in several areas of their home.

The product information lists dual-band 2.4 GHz and 5 GHz, Wi-Fi 5 (802.11ac) and two Ethernet ports on each device.

Joybuy
WiFi Repeater Pro in black

WiFi Repeater Pro, black

A repeater for extending an existing wireless network to an area with poor reception.

The product information lists 2.4 GHz operation and two external aerials. The repeater needs to be placed somewhere it can receive a signal itself.

Joybuy
TP-Link Omada EAP673-Extender, network repeater

TP-Link Omada EAP673-Extender

A repeater for extending an existing wireless network, provided the chosen spot is within its range.

The product information lists dual-band Wi-Fi, Wi-Fi 6 and an Ethernet port.

Joybuy
TP-Link TL-WA801N Wi-Fi extender and access point

TP-Link TL-WA801N Wi-Fi extender/access point

A device with both range extender and access point modes. Choose the mode that suits the connection available where you want to use it.

The product information lists 2.4 GHz, Passive PoE support, two aerials and WPS.

Joybuy

Frequently asked questions

Where should you place a wireless Wi-Fi booster?

Place the booster between the router and the room with poor reception, somewhere it can still receive a strong signal itself. The Consumentenbond highlights the importance of good positioning; then test the connection at your study spot.

Does everyone at home need to buy a new router for mesh?

Not necessarily: first check whether your existing router supports the specific mesh feature used by the point you’ve chosen. TP-Link, FRITZ! and ASUS each describe compatibility with suitable equipment in their own systems.

What should you consider after installation and during use?

Secure your shared network with a strong password, keep your equipment up to date and agree with your housemates on how to manage it. When comparing devices, also consider how many Wi-Fi points you’ll need and their stated or measured energy consumption.

Do you need a licence for standard home Wi-Fi in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, home network Wi-Fi is licence-free when you use the designated frequencies and follow the conditions of use. This applies to Wi-Fi, not to repeaters for mobile telephony.

What marking should you check on a Wi-Fi booster?

Check that the radio equipment actually supplied has the correct CE marking. The Rijksinspectie Digitale Infrastructuur describes this marking as mandatory; the model name alone doesn’t confirm which marking is on your version.