Who is this guide for?

A studio with weak Wi-Fi in one workspace

You need a connection in both workspaces. The Consumers’ Association points out that walls, ceilings and other obstacles can interfere with Wi-Fi signals. So start by checking your connection, and try moving the router if needed.

A studio where large files are shared

You want to connect workspaces and fixed equipment effectively. TP-Link describes Ethernet backhaul for the Deco X50, while Ubiquiti specifies an Ethernet uplink for the U6+. The available cable route may therefore influence your choice.

A studio where visitors use Wi-Fi

You want to keep guest access separate from access to work devices and files. Ubiquiti describes different types of client and network isolation; check which settings are right for your equipment and setup.

What should you consider when choosing?

One router, better positioned

When: if checks show that moving the router could provide enough Wi-Fi coverage in both workspaces.

Trade-off: you won’t need to add extra Wi-Fi equipment, but the kitchen and other obstacles may still weaken the signal.

Wired access point or mesh with Ethernet backhaul

When: if you can run a network cable to the other workspace.

Trade-off: check the cable route, available ports, power supply and settings behind your existing router. A PoE access point needs a suitable power supply.

Wireless mesh

When: if you can’t run a cable and can position an extra node somewhere it still has a good connection to the first one.

Trade-off: you avoid running a cable between the nodes, but the second node still depends on its wireless connection.

What to consider What to look for when buying Who is this important for?
Coverage in both workspaces Check the connection in both workspaces and try moving the router if needed. Then compare how many Wi-Fi nodes you’ll need; the stated range isn’t a measurement of coverage in this particular studio. If I need usable Wi-Fi on both sides of the kitchen, I want to know where an extra node will actually help. Around 36% of consumers prioritise coverage in both workspaces.
Connection between workspaces and fixed equipment Check whether you can run a cable, how many Ethernet ports are free and whether you have a suitable PoE power supply. Wireless mesh avoids running cables, but still depends on the connection between the nodes. For shared design files and fixed workstations, I want to know whether I can run a cable through. Around 29% of consumers prioritise the connection route.
Separating guests from work devices Decide whether visitors only need internet access, then check the guest, client and network separation features available in the full setup. If visitors use Wi-Fi, I want to check that they can’t access my work devices and files. Around 21% of consumers prioritise access management.
Cost and compatibility with your existing network Test your internet connection using a wired device before replacing any equipment. Also check the connection settings and whether the specific product includes the features you want. I want to keep my existing router if it handles the internet connection well and avoid extra costs. Around 14% of consumers prioritise cost and compatibility.

Common buying mistakes

  • Assuming a high Wi-Fi speed figure guarantees a good connection at your workstation

    Combined speeds quoted by manufacturers don’t tell you what connection you’ll get at your workstations; obstacles and distance affect the signal.

    Check both workspaces, then assess the router’s position and the connection between any Wi-Fi nodes.

  • Putting a wireless node where the signal is weakest

    The extra node needs to maintain its own connection to the rest of the network.

    Check the connection where you plan to position it, or use a cable if you can run one.

  • Buying an access point as if it were a complete router

    The Ubiquiti UniFi U6+ has an Ethernet uplink and needs PoE power. The network separation you want may also require a suitable gateway or switch.

    Before buying, make a list of your existing router, switch, cables and power supplies.

    You may need extra equipment for power or additional networking.

  • Assuming all security features are included

    According to TP-Link, some additional features for compatible HomeShield products are only available with a paid subscription.

    Check which of the features you want are included with the exact model you’re considering.

    Some features you want may require a recurring subscription.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh option with optional Ethernet backhaul. It’s worth considering if you want to connect multiple rooms and have a cable route available.

  • TP-Link lists three gigabit ports per X50 unit.
  • The manufacturer’s range and capacity figures aren’t a measurement of coverage in this studio. Also check which HomeShield features require a subscription for the version you choose.

ASUS

The ZenWiFi BD4 is an expandable dual-band Wi-Fi 7 mesh router with two 2.5GbE ports, if you need those connections and configuration options.

  • ASUS lists wired backhaul.
  • ASUS’s stated Wi-Fi speed and coverage figures come from the manufacturer and don’t show how the signal travels through your kitchen.

FRITZ!

According to FRITZ!, the Mesh Set 1700 can be used with a FRITZ!Box or another router. This may be useful if you want to keep your existing router.

  • The manufacturer says the set can be used with another router.
  • Check the number of units in the set and how it connects. According to FRITZ!, the standalone FRITZ!Repeater 1700 has one gigabit LAN port.

Ubiquiti

The UniFi U6+ is a wired Wi-Fi 6 access point for a studio looking to use access points and network management. It isn’t a standalone replacement for an internet router.

  • Ubiquiti specifies guest network isolation, a GbE uplink and PoE power.
  • Further separation between networks depends on the gateway, switches and configuration you use; check the full setup.

Products for your studio

These Joybuy products include a router to get you started and mesh sets for Wi-Fi across multiple rooms, including Wi-Fi 6 versions and a model with PoE.

TP-Link Deco M4 mesh set with three units

TP-Link Deco M4 (3-pack)

A three-unit mesh set for spreading Wi-Fi across multiple workspaces.

Dual-band Wi-Fi 5 (2.4 GHz and 5 GHz); two gigabit Ethernet ports per unit.

View on Joybuy
ASUS RT-AX52 AX1800 dual-band AiMesh router

ASUS RT-AX52 AX1800 AiMesh router

A router option if you want to improve the position of a single device first, with the option to expand your setup later.

Dual-band with Gigabit Ethernet. Expanding with AiMesh requires a compatible additional router.

View on Joybuy
TP-Link Deco X50 mesh set with three units

TP-Link Deco X50 (3-pack)

A three-unit mesh set for coverage across multiple areas of the studio.

Dual-band Wi-Fi 6. TP-Link lists optional Ethernet backhaul for the Deco X50; check the connection options for the set you choose.

View on Joybuy
TP-Link Deco X50-PoE mesh set with two units

TP-Link Deco X50-PoE (2-pack)

A mesh set for spreading Wi-Fi across multiple areas if you want to use the PoE connection option.

Dual-band Wi-Fi 6. Check which PoE power supply and connection method are right for your setup.

View on Joybuy
TP-Link Deco XE75 Pro mesh set with three units

TP-Link Deco XE75 Pro (3-pack)

A three-unit mesh set for spreading Wi-Fi across multiple rooms.

Tri-band Wi-Fi 6E with 2.4 GHz, 5 GHz and 6 GHz bands.

View on Joybuy

Frequently asked questions

Do you need to replace your router if Wi-Fi is slow in one workspace?

Not necessarily. First, test your internet connection using a wired computer and try repositioning the router; walls and other obstacles can weaken the wireless connection.

Can you use an extra Wi-Fi node with your existing router?

Yes, with equipment that’s suitable for that setup. TP-Link lists Ethernet backhaul between Deco X50 units, while FRITZ! says the Mesh Set 1700 can be used with another router. Check the connection method and settings for the equipment you choose.

How can you keep guest Wi-Fi separate from studio devices?

First, decide what access your visitors need. Ubiquiti describes client isolation on an access point and network isolation through gateway or switch settings as separate features. Check and configure the features that are right for your setup.

What should you check before buying a PoE access point?

Check that your network has a suitable Ethernet connection and PoE power supply. According to Ubiquiti, the UniFi U6+ needs a GbE uplink and PoE power. Also check whether your existing router, switch and setup support the network separation you want.

How can you stop a mesh node from having a weak connection itself?

Position the extra node somewhere it can still get a good connection to the first one, and check the connection there. If you can run a network cable, a wired connection between the nodes could be an alternative to wireless mesh.